참고문헌
- S. M. Lee and H. Yasuda: J. Kor. Foundrymen's Soc., "Real time imaging of solidification behavior by synchrotron X-ray radiography", 30(1) (2010) 5-13
- H. Yasuda, T. Nagira, M. Yoshiya, A. Sugiyama, I. Ohnaka, K. Kawasaki, K, Umetani and K. Uesugi: Proceeding of the 5th decennial intern. conf. on solidification processing, "Timeresolved X-ray imaging of dendritic and monotectic solidification of Sn-, Al- and Cu-based alloys", (2007) 306-310
- J. A. Taylor: Proc. of 35th Australian Foundry Institute National Conference, "The effect of iron in Al-Si casting alloys", (2004) 148-157
- M. H. G. Jacobs and R. Schmid-Fetzer: CALPHAD, "Phase behavior and thermodynamic properties in the system Fe-Al", 33 (2009) 170-178 https://doi.org/10.1016/j.calphad.2008.07.010
- Y. Du, J. C. Schuster, Z.-K. Liu, R. Hu, P. Nash, W. Sun, W. Zhang, J. Wang, L. Zhang, C. Tang, Z. Zhu, S. Liu, Y. Ouyang, W. Zhang and N. Krendelsberger: Intermetallics, "A thermodynamic description of the Al-Fe-Si system over the whole composition and temperature ranges via a hybrid approach of CAPHAD and key experiments", 16 (2008) 554-570 https://doi.org/10.1016/j.intermet.2008.01.003
- S. H. Lee and S. M. Lee: J. Kor. Foundrymen's Soc., "Prediction of solidification path in Al-Si-Fe ternary system and experimental verification", 30(1) (2010) 34-45
- B. H. Kim and S. M. Lee: J. Kor. Foundrymen's Soc., "Magnetic separation of Fe contaminated Al-Si cutting chip scraps and evaluation of solidification characteristics", 29(1) (2009) 38-44
-
M. A. Moustafa: J. Mater. Process. Technol., "Effect of iron content on the formation of
$\beta$ -$Al_5FeSi$ and porosity in Al-Si eutectic alloys", 209 (2009) 605-610 https://doi.org/10.1016/j.jmatprotec.2008.02.073 -
X. Ma, A. M. Samuel, F. H. Samuel, H. W. Doty and S. Valtierra: Mater. Sci. Eng. A, "A study of tensile properties in Al-Si-Cu and Al-Si-Mg alloys: Effect of
$\beta$ -iron intermetallic and porosity", 490 (2008) 36-51 https://doi.org/10.1016/j.msea.2008.01.028 -
S. H. Lee, B. H. Kim and S. M. Lee: Proc. of 18th International Symposium on Processing and Fabrication of Advanced Materials, "Solidification path of Al-Si-Fe system and formation of
$Al_5$ FeSi intermetallic phase", 1 (2009) 329-338 -
S. Seifeddine, S. Jhansson and I. L. Svensson: Mater. Sci. Eng. A, "The influence of cooling rate and manganese content on the
$\beta$ -$Al_5FeSi$ phase formation and mechanical properties of Al-Si-based alloys", 490 (2008) 385-390 https://doi.org/10.1016/j.msea.2008.01.056 - S. W. Han: J. Kor. Foundrymen's Soc., "The effects of Mn and Cr additions on the microstructure of A356 alloys containing impure Fe", 25(3) (2005) 128-133
- N. A. Belov, A. A. Aksenov and D. G. Eskin: "Iron in aluminum alloys: Impurity and alloying elements", Taylor & Francis inc., New York (2002) 45-48
-
A. Flores-V., M. Sukiennik, A. H. Castillejos-E., F. A. Acosta- G. and J. C. Escobedo-B.: Intermetallics, "A kinetic study on the nucleation and growth of the
$Al_8FeMnSi_2$ intermetallic compound for aluminum scrap purification", 6 (1998) 217-227 https://doi.org/10.1016/S0966-9795(97)00073-3 - J. Wang, P. D. Lee, R. W. Hamilton, M. Li and J. Allison: Scr. Mater., "The kinetic of Fe-rich intermetallic formation in aluminium alloys: In situ observation", 60 (2009) 516-519 https://doi.org/10.1016/j.scriptamat.2008.11.048