Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Hydraulic Fall Prevention Device

유압식 추락 방지장치에 관한 연구

  • Choi, Jung-Hun (Department of Mechanical Engineering, Sungkyunkwan Univ.) ;
  • Koo, Jae-Mean (Department of Mechanical Engineering, Sungkyunkwan Univ.) ;
  • Seok, Chang-Sung (Department of Mechanical Engineering, Sungkyunkwan Univ.) ;
  • Huh, Yong (R&D Planning Group Digital Appliance Division, SEC) ;
  • Chang, Sung-Yong (Power Generation Laboratory, KEPCO Research Institute)
  • 최정훈 (성균관대학교 기계공학부 일반대학원) ;
  • 구재민 (성균관대학교 기계공학부) ;
  • 석창성 (성균관대학교 기계공학부) ;
  • 허용 (삼성전자 디지털미디어총괄 생활가전 사업부) ;
  • 장성용 (한국전력공사 전력연구원 수화력 발전연구소)
  • Received : 2009.12.16
  • Accepted : 2010.08.30
  • Published : 2010.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

Since a tower crane is too high for a worker to ascend and by the wind in the high altitude, the possibility of a safety accident is very high, a lift assist is used. In this study, the hydraulic fall prevention device using the pressure generation device by Seok, et al. was developed. For this, the effects on the fall prevention performances of factors such as gear clearance, oil viscosity, rotative velocity and so on were evaluated by the analysis of fluid flow using FEM and the prototype was producted and a function test was performed.

Keywords

References

  1. Kenji, M., "Differential gear," United States Patent, No. 6120407, 1999.
  2. Gao, H., Barber, G. C. and Chu, H., "Friction characterics of a paper-based friction material," Int. J. Automotive Technology, Vol. 3, No. 4, pp. 171-176, 2000.
  3. Lee, B. H., "Limited Slip Differential and Effect of Transfer Torque on Vehicle Dynamics," KIA Technical Report, No. 13, pp. 135-142, 1990.
  4. Korea Society of Automotive Engineer, "Handbook of Automotive technology," pp. 240-250, 1996.
  5. Koo, J. M., Choi, C. H., Huh, Y. and Seok, C. S., "Development of a Hydraulic Limited Slip Differential System using a Pressure Generator," International Journal of Automotive Technology, Vol. 9, No. 3 pp. 323-327, 2008. https://doi.org/10.1007/s12239-008-0039-0
  6. Seok, C. S., "Limited Slip Differential with Friction Using a Pressure Generating Device," United States Patent, No. PCT F16H 48120, 2005.
  7. Nyman, P., Maki, R., Olsson, R. and Ganemi, B., "Influence of surface topography on friction characteristics in wet clutch applications," Wear, Vol. 261 , No. 1, pp. 46-52, 2006. https://doi.org/10.1016/j.wear.2005.09.020