한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

연속파형 Nd:YAG 레이저를 이용한 금형강의 보수용접 특성에 관한 연구

A Study on the Characteristics of Repair Welding for Mold Steel using Continuous Wave Nd:YAG Laser

  • 유영태 (조선대학교 메카트로닉스공학과) ;
  • 신호준 (조선대학교 레이저가공연구실)
  • 투고 : 2009.11.13
  • 심사 : 2010.08.05
  • 발행 : 2010.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, wire was used as the filler material for the laser repair welding, and the phenomenon in which the supplied filler material was melted and beaded down into the specimen was examined with varying laser powers and welding speeds. The optimal processing condition was found to be the laser power of 1,300 W, the welding speed and feed wire supply speed of 0.5 ml/in and the defocused distances of +2mm. At this time, the heat input(E) was $65{\sim}75\;J/mm^2$, and no internal defect occurred. When repair welding was carried out as the optimal processing for the part that had an external defect with the radius of 2mm, the filler metal was melted, resulting in the volume smaller than the defect part and thus causing the part unfilled. Therefore, it was found to be necessary to carry out repair welding two to three times by multiple passes rather than does it only once by single pass.

키워드

참고문헌

  1. Sun, Z. and Cuo, M., "Bridging the joint gap with wire feed laser welding," Journal of Materials Processing Technology, Vol. 87, No. 1, pp. 213-222, 1999. https://doi.org/10.1016/S0924-0136(98)00346-X
  2. Orabi, A. G., Casalino, G, Benyounis, K. Y. and Hashmi, M. S. J., "An ANN and Taguchi algorithms integrated approach to the optimization of C02 laser welding," Advances in Engineering Software, Vol. 37, No. 10, pp. 643-648, 2006. https://doi.org/10.1016/j.advengsoft.2006.02.002
  3. Waheed, U. H., Andrew, J. P. and Lin, L., "A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping," Applied Surface Science, Vol. 247, No. 1-4, pp. 268-276, 2005. https://doi.org/10.1016/j.apsusc.2005.01.138
  4. Lee, J. H., Suh, M. H. and Han, Y. H., "Laser Cladding," Journal of Korean Welding and Joining Society, Vol. 18, No. 2, pp. 154-162, 2000.
  5. Vedani, M., Previtali, B., Vimercati, G M., Sanvito, A. and Somaschini, G, "Problems in laser-repair welding a surface-treated tool steel," Surface & Coatings Technology, Vol. 201, No. 8, pp. 4518-4519, 2007. https://doi.org/10.1016/j.surfcoat.2006.09.051
  6. Vedani, M., "Microstructural evolution of tool steels after Nd-YAG laser repair welding," Journal of Materials Science, Vol. 39, No. 1, pp. 241-249, 2004. https://doi.org/10.1023/B:JMSC.0000007750.16970.4e
  7. Capello, E. and Previtali, B., "The influence of operator skills, process parameters and materials on clad shape in repair using laser cladding by wire," Journal of Materials Processing Technology, Vol. 174, No.1-3, pp. 223-232, 2006. https://doi.org/10.1016/j.jmatprotec.2006.01.005
  8. James, J. O. and Carl, N. W., "Laser Weld Repair of Tantalum Sheet," The Smithsonian/NASA Astrophysics Data System, pp. 924-931 , 1993.
  9. Park, H. S., Jun, T. O. and Kim, D. H., "A Study on the Wear Characteristics and the Mechanism of KP- 4M Steel for Plastic Molding," Journal of the Korean Society of Tribologists and Lubrication Engineers, Vol. 12, No. 1, pp. 22-28, 1996.
  10. Kim, G S., Oh, Y. K. and Ahn, B. K., "A Characteristics of Heat Affected Zones in Weld Repair for a Damaged CrMoV Turbine Roter Steel," Journal of the Korean Welding and Joining Society, Vol. 14, No. 4, pp. 89-98, 1996.
  11. Shin, H. J., Yoo, Y. T. and Oh, Y. S., "Characteristics of Surface Hardening of Dies steel for Plastic Molding using Continuous Wave Nd:YAG laser," Journal of the Korean Society for Precision Engineering, Vol. 26, No. 1, pp. 71-81, 2009.
  12. John, F. R., "LlA Handbook of Laser Materials Processing," LlA-Magnolia Publishing Inc., p. 402, 2001.