Journal of Welding and Joining

  • 제28권5호
  • /
  • Pages.15-19
  • /
  • 2010
  • /
  • 2466-2232(pISSN)
  • /
  • 2466-2100(eISSN)
대한용접접합학회 (The Korean Welding and Joining Society)
권호 표지
DOI QR코드

DOI QR Code

알루미늄합금과 타이타늄합금 판재에 대한 마찰교반용접 계면부의 미세조직

Interfacial Microstructure of Dissimilar Friction Stir Welds between Al and Ti alloy Sheets

  • 이광진 (한국생산기술연구원) ;
  • 방기상 (조선대학교 선박해양공학 대학원)
  • 발행 : 2010.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

키워드

참고문헌

  1. Kwangjin Lee : Effect of post weld heat treatment for crystal orientation distribution on friction stir welds of Al-Mg-Si series aluminum alloy sheets. Journal of KWJS 27-6 (2009), 62∼67 (in Korean) https://doi.org/10.5781/KWJS.2009.27.6.062
  2. P. Bala Srinivasan, W. Dietzel, R. Zettler, J. F. dos Santos and V. Sivan ; Stress corrosion cracking susceptibility of friction stir welded AA7075-AA6056 dissimilar joint, Mater Sci. Eng. A, 392 (2005), 292-300 https://doi.org/10.1016/j.msea.2004.09.065
  3. M. Peel, A. Steuwer, M. Preuss and P. J. Withers ; Microstructure, mechanical properties and residual stress as a function of welding speed in aluminum AA5083 friction stir welds, Acta Mater., 51(2003), 4791-4801 https://doi.org/10.1016/S1359-6454(03)00319-7
  4. Y. S. Sato, H. Kokawa, K. Ikeda, M. Enomoto, S. Jogan and T. Hashimoto ; Microstructure in the friction stir weld of an aluminum alloy, Metal. and mater. Trans. A, 32(2001), 941-948
  5. R. W. Fonda, J. F. Bingert and K. J. Colligan ; Development of grain structure during friction stir welding, Scripta Mater., 51(2004), 243-248 https://doi.org/10.1016/j.scriptamat.2004.04.017
  6. K. V. Java and S. L. Semiatin ; Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloy, Scripta Mater., 43(2000), 743-749 https://doi.org/10.1016/S1359-6462(00)00480-2
  7. Y.S. Sato, Y. Kurihara, S.H.C. Park, H. Kokawa and N. Tsuji ; Friction stir welding of ultrafine grained Al alloy 1100 produced by accumulative roll-bonding, Scripta Mater., 50(2004), 57-60 https://doi.org/10.1016/j.scriptamat.2003.09.037
  8. S. Lathabai, M. J. Painter, G.M.D. Cantin and V.K. Tyagi ; Friction spot joining of an extruded Al-Mg-Si alloy, Scripta Mater., 55(2006), 899-902 https://doi.org/10.1016/j.scriptamat.2006.07.046
  9. K. Nakata, Y.G. Kim, H. Fujii, T. Tsumura and T. Komazaki ; Improvement of mechanical properties of aluminum die casting alloy by multi-pass friction stir processing, Mater Sci. Eng. A, 437(2006), 274-280 https://doi.org/10.1016/j.msea.2006.07.150
  10. Y.S. Sato, H. Yamanoi, H. Kokawa and T. Fukuhara ; Microstructural evolution of ultrahigh carbon steel during friction stir welding, scripta Mater., 57(2007), 557-560 https://doi.org/10.1016/j.scriptamat.2007.04.050