초록
반도체 공정에서 배출되는 미세입자를 포집하기 위하여 전기집진장치가 적용되고 있으나, 배출가스 내 포함된 강부식성 오염원에 의한 전기집진장치 내부 오염 및 부식 문제가 심각하여, 이를 해결하기 위한 방안이 절실하다. 본 연구에서는 탄소섬유로 이루어진 하전부와 PET 필름 사이에 금속 박막이 삽입된 집진부로 이루어진 내부식 전기집진장치를 개발하여, 하전부 및 집진부 인가전압, 처리유량, 하전부 채널 수 등의 운전 조건에 따른 전기집진기의 초미세입자 집진 성능을 평가하였다. 평균입경이 100 nm인 KCl 입자를 시험입자로 사용하였으며, 전기집진기 전/후단 입자 농도 변화를 측정하기 위하여 SMPS를 사용하였다. 본 연구에서 개발된 9채널 하전부와 65 mm 집진부로 구성된 전기집진기의 성능평가 결과, $500\;m^3/hr$ 유량조건에서 하전부 및 집진부에 7 kV와 10 kV를 각각 인가하였을 때, 300 nm입자에 대한 포집효율이 90% 이상으로 높게 나타났다.
Electrostatic precipitators (ESPs) used currently in industries for removing fine particles from semiconductors have to be made of expensive anticorrosive metallic materials in order to maintain their particle-removal performance. To satisfy the economical demands of industries, a novel ESP was developed; in this ESP, the charger is made of carbon fibers and collection plates consist of PET films among which an aluminum sheet is inserted. The ESP was evaluated by changing the voltages applied to the chargers and collection plates, flow rates, and number of charging channels. KCl particles with mean diameters of 100 nm were used, and a scanning mobility particle sizer was used to measure the changes in particle number concentrations upstream and downstream of the ESP. The experimental results showed that more than 90% of the particles were removed by using the ESP containing ionizers with nine channels and 65-mm collection plates at $500\;m^3/hr$ when voltages of 7 kV and 10 kV were applied to the ionizers and collection plates, respectively.