Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Automatic Transmission Parts by Using Vacuum Carburizing Heat-treatment Technology

진공침탄 공정기술을 이용한 자동변속기 부품 개발

  • 이원범 (한국생산기술연구원 열.표면기술센터) ;
  • 문경일 (한국생산기술연구원 열.표면기술센터) ;
  • 조용기 (한국생산기술연구원 열.표면기술센터) ;
  • 임경묵 (한국생산기술연구원 열.표면기술센터) ;
  • 변상교 (경북열처리공업사)
  • Received : 2010.05.17
  • Accepted : 2010.10.30
  • Published : 2010.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Vacuum carburizing process is well known process for its environment-friendly, low-cost, high-quality characteristics, compared with gas carburizing. In this study, a research was carried out to develop a process of vacuum carburizing for essential components of automotive transmission that is difficult to control its distortion. As a result, vacuum carburizing process is superior to gas carburizing in terms of cost, environment and quality.

Keywords

References

  1. H. Y. Kim, S. J. Park, Surface Heat Treatment, WonChang press, 1996.
  2. H. Iwata, IHI Technical Report, 45(1) (2005) 15.
  3. P. Kula, R. Pietrasik, K. Dybowski, J. Mat. Pro. Tech., 164-165 (2005) 876. https://doi.org/10.1016/j.jmatprotec.2005.02.145
  4. Francis T. Farago, Mark A. Curtis, Handbook of Dimensional Measurement 3rd edition, Industrial Press Inc., 1994.
  5. F. Chen, L. Liu, Mat. Chem & Phy., 82 (2003) 801. https://doi.org/10.1016/j.matchemphys.2003.07.010

Cited by

  1. The Change in Diffusion Coefficient and Wear Characteristic in Carbonitriding Layer of SCM415 Steel vol.44, pp.5, 2011, https://doi.org/10.5695/JKISE.2011.44.5.207