한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제9권5호
  • /
  • Pages.40-49
  • /
  • 2010
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지

치형수정에 의한 코니칼 인볼류트 기어의 치면 압축응력 해석

Analysis of Tooth Surface Compressive Stress of Conical Involute Gear by Profile Modification

  • 김준성 (목포해양대학교 기관시스템공학부) ;
  • 이현수 (경상대학교 기계항공공학부) ;
  • 김동욱 (경상대학교 기계항공공학부) ;
  • 류성기 (경상대학교 기계항공공학부(ReCAPT))
  • 투고 : 2010.08.09
  • 심사 : 2010.09.16
  • 발행 : 2010.10.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Conical involute gears are being used for marine gearboxes, automotive transmissions, and robots, and so on, but not much. As involute profile gear, conical involute gear not only can be engaged with spur and helical gear but also can be used for power transmission of parallel, crossed and skewed axis with small angle. Hence, conical involute gears are likely to develop in future. Through a study on the basic theory of conical involute gear, tooth surface compressive stress analysis was performed by using commercial modeling program, comparing before and after profile modification. As a result, it noticed that tooth profile modification is able to relieve more tooth surface compressive stress than before modification.

키워드

참고문헌

  1. 홍장표, "기계설계 이론과 실제", (주)북스힐, pp. 607-726, 2005.
  2. 歯車便覧編集委員会, "歯車便覧", 日刊工業新聞社, pp. 73-142, 1962.
  3. 仙波正荘, 大山正一, "기어便覽解說", 機電硏究社. pp. 1-51.
  4. 三留謙一, "円すい形インボリュート歯車の研究 (第１報, 設計および製作法)", 日本機械学会論文集, C, 48-430, pp. 852-859, 1982.
  5. 小松原英範, 三留謙一, 大町竜哉, "舶用トランスミッション用コンケーブコニカルギヤの開発," 日本機械学会論文集, 66卷645号, pp. 1652-1659, 2000-5
  6. Chia-Chang Liu, Yi-Cheng Chen, and Shin-Hao Lin, "Contact Stress Analysis of Straight Concave Conical Involute Gear Pairs with Small Intersected Angles", Proceedings of the International MultiConference of Engineers and Computer Scientists 2010 Vol III, IMECS 2010, March 17-19, 2010, Hong Kong.
  7. 김광태, 정재수, "기어기초활용기술", 예문사, pp. 65-78, 2008.
  8. 三留謙一, "円すい形インボリュート歯車の加工法とその応用の関する研究", 博士學位論門, pp. 1-20.
  9. http://blog.naver.com/dymaxion/150007000095.
  10. 會田俊夫, "円筒歯車の設計.製作(1)," 大河出版刊, pp. 105-107, 1974.
  11. (주)태성에스엔이, "ANSYS workbench 왕초보 탈출하기," 시그마프레스, 2008.
  12. ISO6336-1, Annex A, "Guide values for crowning and end relief of tooth of cylindrical gears," pp. 85, 1996.