Post-sulfonation에 의한 SBS 이온교환막의 제조 및 특성

Preparation and Property of SBS Ion-exchange Membrane Via Post-sulfonation

  • 최용재 (충남대학교 화학공학과) ;
  • 황의환 (공주대학교 화학공학부) ;
  • 황택성 (충남대학교 화학공학과)
  • Choi, Yongjae (Department of Chemical Engineering, College of Engineering, Chungnam National University) ;
  • Hwang, Eui Hwan (Department of Chemical Engineering, Kongju National University) ;
  • Hwang, Taek Sung (Department of Chemical Engineering, College of Engineering, Chungnam National University)
  • 투고 : 2010.05.27
  • 심사 : 2010.07.23
  • 발행 : 2010.12.31

초록

본 연구에서는 post sulfonation 반응을 통하여 SBS 양이온교환막을 제조하였다. 술폰화 양이온교환막의 술폰화도, 함수율, 이온교환용량, 전기저항 및 전기전도도등 막의 전기적 특성을 술폰화 시간을 변수로 하여 확인하였다. 술폰화 SBS 막의 술폰화도는 반응시간 및 황산의 농도가 증가함에 따라 증가하였으며 최대 술폰화도는 24.0%이었다. 또한 막의 함수율과 이온교환용량은 술폰화도가 증가함에 따라 증가하였으며 각각 41.2%, 0.80 meq/g로 가장 높았으며, 전기저항과 전기전도도는 각각 $23.6{\Omega}{\cdot}cm^2$, $4.24{\times}10^{-4}S/cm$이었다.

In this study, the sulfonated SBS cation-exchange membrane was prepared by post-sulfonation. Degree of sulfonation(DS), water-uptake, ion exchange capacity and electrical resistance and conductivity of sulfonated SBS were investigated as a function of sulfonation time. The DS of sulfonated SBS membrane was increased with increasing the reaction time and concentration of sulfuric acid. The maximum value of DS was 24.0%. And also, the water uptake and ion exchange capacity of the sulfonated SBS membrane were increased as increasing the value of DS. The values of water uptake and IEC were 41.2% and 0.80 meq/g, respectively. The electrical resistance and conductivity of the membrane showed $23.6{\Omega}{\cdot}cm^2$ and $4.24{\times}10^{-4}S/cm$, respectively.

키워드

참고문헌

  1. Mauhar, S. M., Barjaktarovic, B. G. and Sovilj, M. N., "Optimization of Ropylene-propane Distillation Process," Chem. Pap., 58, 386(2004).
  2. Silva, D. L. and Brunner, G., "Desorption of Heavy Metals from Ion Exchange Resin with Water and Carbon Dioxide," Braz. J. Chem. Eng., 23, 213(2006). https://doi.org/10.1590/S0104-66322006000200008
  3. Rajindar Singh, "Sustainable Fuel Cell Integrated Membrane Desalination Systems," Desalinaion, 227, 14(2008). https://doi.org/10.1016/j.desal.2007.06.019
  4. Xu, T., "Ion Exchange Membranes : State of Their Development and Perspective," J. Membr. Sci., 263, 1(2005). https://doi.org/10.1016/j.memsci.2005.05.002
  5. Nagarale, R. K., Gohil, G. S. and Shahi, V. K., "Recent Developments on Ion-exchange Membranes and Electro-membrane Processes," Adv. Colloid. Inter. Sci., 119, 97(2006). https://doi.org/10.1016/j.cis.2005.09.005
  6. Farmer, J. C., Fix, D. V., Mack, G. V., Pekala, R. W. and Poco, J. F., "Capacitive Deionization of $NH_4ClO_4$ Solutions with Carbon Aerogel Electrodes," J. Appl. Electrochem., 26, 1007(1996).
  7. Lee, K. S., Kim, J. H. and Kim, J. H., "Capacitive Deionization of NaCl and NaF Solutions with Activated Carbon Cloth Electrodes," Appl. Chem., 7, 129(2003).
  8. Kariduraganavar, M. Y., Nagarale, R. K., Kittur, A. A. and Kulkami, S. S., "Ion-exchange Membranes: Preparative Methods for Electrodialysis and Fuel Cell Applications," Desalination, 197, 225(2006). https://doi.org/10.1016/j.desal.2006.01.019
  9. Yang, Y. and Holdcroft, "Synthetic Strategies for Controlling the Morphology of Proton Conducting Polymer Membranes," Fuel Cells, 2, 171(2005).
  10. Park, H. B. and Lee, Y. M., "Polymer Electrolyte Membranes for Fuel Cell," J. Korean Ind. Eng. Chem., 13, 1(2002).
  11. Green, M. A., "Thin-film Solar Cells: Review of Materials, Technologies and Commercial Status," J. Mater. Sci. - Mater. Electron., 18, 15(2007). https://doi.org/10.1007/s10854-007-9177-9
  12. Baek, K. W., Cho, I. H., Nho, Y. C. and Hwang, T. S., "Adsorption Properties for Heavy Metals Using Hybrid Ion Exchange Fibers with Sulfonated PONF-g-styrene by Radiation Polymerization and Cation Exchange Resin," Polym. (Korea), 30, 525(2006).
  13. Cho, I. H., Baek, K. W., Lim, Y. M., Nho, Y. C. and Hwang, T. S., "Synthesis of POF Cation Exchange Fibers Using PE Coated PP Matrix by Radiation-induced Polymerization and Their Adsorption Properties for Heavy Metals," Polym. (Korea), 31, 239(2007).
  14. Choi, K. J., Lee, C. H. and Hwang, T. S., "Synthesis of High Affinity Anion Exchanger Using Ultrafine Fibrous PPmb Nonwoven Fabric by Co60 Irradiation Method," Polym. (Korea), 32, 509(2008)
  15. Nasef, M. M., Saidi, H. and Nor, H. M., "Proton Exchange Membranes Prepared by Simultaneous Radiation Grafting of Styrene Onto Poly(tetrafluoroethylene-co-hexafluoropropylene) Films. I. Effect of Grafting Conditions," J. Appl. Polym. Sci., 76, 220(2000). https://doi.org/10.1002/(SICI)1097-4628(20000411)76:2<220::AID-APP11>3.0.CO;2-M
  16. Nasef, M. M. and Saidi, H., "Preparation of Cross Linked Cation Exchange Membranes by Radiation Grafting of Styrene/divinylbenzene Mixtures Onto PFA Films," J. membr. Sci., 5572, 1(2003). https://doi.org/10.1016/S0376-7388(03)00027-9
  17. Cho, I. H., Baek, K. W., Lee, C. S., Nho, Y. C., Yoon, S. K. and Hwang, T. S., "Synthesis of Sulfonated POF-g-Styrene Ion Exchange Fibers by Radiation-Induced Polymerization and Properties of Ammonia Adsorption," Polym. (Korea), 31, 1(2007).
  18. Othman, M. H. D., Ismail, A. F. and Mustafa, A., "Physico-chemical Study of Sulfonated Poly(ether ether ketone) Membranes for Direct Methanol Fuel Cell Application," Malaysian Polym. J. (MPJ), 2, 10(2007).
  19. Shang, X., Fang, S. and Meng, Y., "Synthesis and Characterization of Poly(arylene ether ketone) with Sulfonated Fluorene Pendants for Proton Exchange Membrane," J. Membr. Sci., 297, 90 (2007). https://doi.org/10.1016/j.memsci.2007.03.014
  20. Jeong, B. Y., Song, S. H., Baek, K. W., Cho, I. H. and Hwang, T. S., "Preparation and Properties of Heterogeneous Cation Exchange Membrane for Recovery of Ammonium Ion from Waste Water," Polym. (Korea), 30, 486(2006).
  21. Bebin, P., Caravanier, M. and Galiano, H., J, "$Nafion^{\circledR}/clay-SO_3H$ Membrane for Proton Exchange Membrane Fuel Cell Application," J. Membr. Sci., 278, 35(2006). https://doi.org/10.1016/j.memsci.2005.10.042
  22. Sumner, M. J., Harrison, W. L., Weyers, R. M., Kim, Y. K., McGrath, J. E., Riffle, J. S., Brink, A. and Brink, M. H., "Novel Proton Conducting Sulfonated Poly(arylene ether) Copolymers Containing Aromatic Mitriles," J. Membr. Sci., 239, 199(2004). https://doi.org/10.1016/j.memsci.2004.03.031