DOI QR코드

DOI QR Code

Start-up Noise Reduction of Reciprocating Compressor Using Cavity Resonance Analysis

공동 공진해석을 이용한 왕복동식 압축기의 기동소음 저감에 관한 연구

  • 김민철 (계명대학교 기계.자동차공학부) ;
  • 김원진 (계명대학교 대학원 기계공학과)
  • Published : 2010.02.20

Abstract

This work focuses on finding a method to reduce the noise of a hermetic reciprocating compressor during start-up using an acoustical analysis. The noise of compressor during start-up, which is a higher level than that of a normal operating condition, has transient and non-stationary characteristics. The acoustical analysis of compressor cavity is performed to find an effective method to reduce the noise level. In the acoustical analysis, the shape variations of frequency response function in the neighborhood of resonances are tested for three parameters: the height of remained oil, the suction position of refrigerant and the position of driving part. As a conclusion of this result, to reduce the emission noise of compressor during start-up, the height of remained oil should be kept at 16 mm, the refrigerant should be sucked at the cross point of nodal lines of X and Y directional cavity modes, and the driving part should be positioned in the center of cavity.

Keywords

References

  1. Kim, J. H., 1998, "Review of Noise and Vibration Research of the Hermetic Compressor," Proceedings of the Korean Society for Noise and Vibration Engineering Conference, pp. 17-24.
  2. Johnson, C. N. and Hamilton, J. F., 1972, "Cavity Resonance in Fractional HP Refrigerant Compressors," Proceedings of the 1972 Purdue Compressor Technology Conference, pp. 83-89.
  3. Albrizio, F., Genoni, C., Bianchi, V. and Frontini, G., 1990, "Noise Reduction of Hermetic Compressor by Identification of the Gas Cavity Resonance," Proceedings of the 1990 Purdue Compressor Technology Conference, pp. 612-624.
  4. Akella, S., Venkateswarlu K. and Sundaresan S. A., 1992, "Cavity Resonances in Hermetic Compressors : a Finite Element Approach," Proceedings of the 1992 Purdue Compressor Technology Conference, pp. 1477-1486.
  5. Yoshimura, T., Akash, H., Inagaki, K., Kita, I., Yabiki, J. and Fujiwara, N., 1994, "Noise Reduction of Hermetic Reciprocating Compressor," Proceedings of the 1994 Purdue Compressor Technology Conference, pp. 253-258.
  6. Elson, J. P., 1978, "Vibration Related Testing for Hermetic Compressor Development," Proceedings of the 1978 Purdue Compressor Technology Conference, pp. 50-54.
  7. Brown, M. E., 1992, "Noise Identification and Reduction in Small Hermetic Reciprocation Compressors," Proceedings of the 1992 Purdue Compressor Technology Conference, pp. 331-339.
  8. SYSNOISE Rev 5.5 User's Manual, LMS International.
  9. Suh, K. H., Lee, H. and Oh, W. S., 1998, "An Analysis of the Hermetic Reciprocating Compressor Acoustic System," Proceedings of the 1998 Purdue Compressor Technology Conference, pp. 361-366.