DOI QR코드

DOI QR Code

고효율 Hybrid LED 패키지 설계 및 초정밀 광학패턴 가공에 관한 연구

A Study on Design of High Luminance Hybrid LED Package and Ultra-fine Machining of Optical Pattern

  • 전은채 (한국기계연구원 나노공정장비연구실) ;
  • 제태진 (한국기계연구원 나노공정장비연구실) ;
  • 황경현 (한국기계연구원 나노공정장비연구실)
  • 투고 : 2010.09.29
  • 심사 : 2010.10.19
  • 발행 : 2010.12.01

초록

Newly suggested hybrid LED package can reduce the number of LED processes and enhance light efficacy in virtue of its integrated optical patterns. Square-type pyramid pattern was chosen for the integrated optical pattern in this study, and it was proved that the pattern enhances illuminance about three times and luminance about two and half times by optical simulation. Square-type pyramid patterns of 0.02mm height and 0.04mm pitch were successively machined on a copper mold which is necessary for imprinting the integrated pattern. Hybrid LED package with integrated optical pattern will be manufactured with ultra-fine machined mold in future study.

키워드

참고문헌

  1. Daco industry research center, 2009, State-of-art and forecast of LED and LED lighting, Jinhan M&B, pp. 5-14.
  2. B. Bae, 2009, Lighting LED market forecast & Korea's LED lighting industry analysis, Displaybank, pp. 37-38.
  3. H. S. Jeon, P. S. Huh, 2010, Analysis of chainvalue of LED lighting industry, E-trends (ETRI), Vol. 25, No. 2, pp. 142-151.
  4. E. C. Jeon et al., 2009, LED lighting apparatus having LED package integrated on circuit board and fabricating method thereof, Applied Korean Patent No. 2009-0126621.
  5. T. J. Je et al., 2009, Influence upon machining accuracy of micro-pattern roll mold provessed by temperature variation, Trans. of Materials Processing, Vol. 18, No. 2, pp. 107-111. https://doi.org/10.5228/KSPP.2009.18.2.107
  6. Y. E Yoo et al., 2006, A study on the manufacturing of micro-patterned light guide, Proc. Kor. Soc. Pre. Eng. 2006, pp. 534-535.
  7. H. R. Saghai, A. Asgari, H. B. A. Nejad, A. Rostami, 2008, A study in optical properties of AlGaN/GaN pyramid and prism-shape quantum dots, Physica E, Vol. 41, pp. 245-253. https://doi.org/10.1016/j.physe.2008.07.009
  8. N. Skoulidis, H. M. Polatoglou, 2005, Modeling the optical properties of Si-capped germanium quantum dots, Comp. Mater. Sci., Vol. 33, pp. 303-309. https://doi.org/10.1016/j.commatsci.2004.12.013
  9. M. Karl, D. Rulke, T. Beck, D. Z. Hu, D. M. Schaadt, H. Kalt, M. Hetterich, 2010, Reversed pyramids as novel optical micro-cavities, Superlattices and Microstructures, Vol. 47, pp. 83-86. https://doi.org/10.1016/j.spmi.2009.07.011
  10. Y. M. Lee, J. H. Lee, E. C. Jeon, 2010, A study on an integrated light guide plate, Kor. J. of Optics and Photonics, Vol. 21, No. 2, pp. 53-30. https://doi.org/10.3807/KJOP.2010.21.2.053

피인용 문헌

  1. Performance Evaluation of a Thermo Siphon Type Radiator for LED Lighting System by using an Inverse Heat Transfer Method vol.20, pp.7, 2011, https://doi.org/10.5228/KSTP.2011.20.7.473
  2. Development of Fin Expansion Type Cooling System using Heat Pipes for LED Lightings vol.21, pp.2, 2012, https://doi.org/10.5228/KSTP.2012.21.2.131
  3. A study on the analysis method of shape quality and the micro burr removal on a micro pyramid pattern using the micro MR fluid jet polishing system vol.25, pp.4, 2016, https://doi.org/10.1088/0964-1726/25/4/045001