Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Extru-Shear Welding(ESW) Process of Aluminum Plates

알루미늄 판재의 압출전단접합에 관한 연구

  • 이경국 (부경대학교 대학원) ;
  • 이문용 ((주)성우하이텍 기술연구소) ;
  • 진인태 (부경대학교 기계공학과)
  • Received : 2010.08.03
  • Accepted : 2010.11.03
  • Published : 2010.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

It was investigated that two plates of aluminum can be welded by hot extru-shear welding process with extru-shear welding dies, and that the welding strength and metal flow on the welding section were analyzed by computer simulation according to the welding variables such as inclined angle of cutter and overlapped length of plates and temperature of plates. It was known by computer simulation that welding strength on the welding section of plates could be influenced by the inclined angle of cutter and overlapped length of plates and temperature of plates. And it was known by experiments that two plates of aluminum can be welded on the end sections by hot extru-shear welding process using extru-shear welding dies, and that welding strength is the highest when inclined angle of dies is $70^{\circ}$, and overlapped length is 1.2 mm, and temperature is $520^{\circ}$, when aluminum 5052 two plates with 1.6 mm thickness are used as welding material.

Keywords

References

  1. Y. M. Yeon, C. Y. Lee, W. B. Lee, S. B. Jung, Keun Song, 2006, Joint Characteristics of Spot Friction Stir Welded A 5052 Alloy Sheet, J. Kor. Welding Soc., Vol. 24, No. 1, pp. 71-76.
  2. Y. B. Park, J. S. Koo, B. C. Goo, 2009, A Study on Friction Stir Welding Properties of A6005 Extruded Aluminum Panels, J. Kor. Soc. Railway, Vol. 12, No. 4, pp. 512-517.
  3. M. Fujimoto, S. Koga, N. Abe, S. Y. Sato, H. Kokawa, 2009, Analysis of plastic flow of the Al alloy joint produced by friction stir spot welding, J. Jpn. Welding Soc., Vol. 23, No. 8, pp. 589-596,. https://doi.org/10.1080/09507110802543088
  4. H. Y. Wu, S. Lee, Y. H. You, 2002, Genuine solidstate bonding characteristics of superplastic Alalloys, J. Mater. Process. Technol., Vol. 122, No. 2/3, pp. 226-231. https://doi.org/10.1016/S0924-0136(02)00006-7
  5. I. T. Jin, 2006, Apparatus and method for hot bonding metal plates, Korea Patent, 10-0622524.
  6. I. T. Jin, K. K. Lee, 2005, A Study on the Hot Pressure Welding of Aluminum Rods, Proc. Kor. Soc. Manuf. Process Eng. Conf., pp. 142-145.
  7. I. T. Jin, K. K. Lee, 2005, Hot Extru-Pressure Welding of Aluminum Rods using Eccentricinclined Stepped Welding Dies, Proc. Kor. Soc. Tech. Plast. Conf., pp. 206-209.
  8. K. K. Lee, I. T. Jin, 2008, A study of Extru-Pressure Welding Strength of Aluminum Rods, Trans. Mater. Process., Vol. 17, No. 4, pp. 284-291. https://doi.org/10.5228/KSPP.2008.17.4.284

Cited by

  1. A Shaving Shear-Welding Process for Overlapped Aluminum Plates vol.21, pp.8, 2012, https://doi.org/10.5228/KSTP.2012.21.8.467