DOI QR코드

DOI QR Code

High Tunable Control Algorithm for Semi-active Suspension by a Normal Type CDC Damper

연속 가변 댐퍼에 의한 반능동 현가장치의 고 자유도 제어기

  • Received : 2010.06.11
  • Accepted : 2010.08.17
  • Published : 2010.11.01

Abstract

This paper proposes CDC (Continuous Damping Control) algorithm and verifies in multi-body dynamic vehicle. In order to distinguish a road profile on driving, waviness calculated by the filtered vertical-accelerations of sprung and unsprung masses is introduced. Sky-hook control is used at a low waviness road and constant damping level control is used at a high waviness road, where the hard damping level is determined by waviness, roll rate, acceleration, and deceleration. The damping levels of ride, anti-roll, anti-squat, and anti-dive modules are calculated by tuning parameters which is dependent upon vehicle velocity. Therefore this high tunable algorithm is useful to improve the ride and handling performance under various driving conditions. In the simulations, tire and dampers are modelled by SWIFT (Short Wavelength Intermediate Frequency Tire) model and 1st order delay model, and results are compared with conventional damper's.

Keywords

References

  1. H. W. Woo and J. Ryu, “A new double sky-hook algorithm for improving road-holding property in semi-active suspension Systems,” Trans. Korean Society of Automotive Engineers, vol. 7, no. 1, pp. 192-200, Jan. 1999.
  2. K. S. Yi, M. W. Suh, and T. I. Oh, “A robust semi-active suspension control law,” Trans. Korean Society of Automotive Engineers, vol. 2, no. 6, pp. 117-126, Nov. 1994.
  3. S.-G. So, “A study on the semi-active suspension systems applying fuzzy logic,” J. of Korean Institute of Intelligent Systems, vol. 10, no. 1, pp. 52-57, Feb. 2000.
  4. J. Kim and K. Yi, “States/road input observer-based control of semi-active suspensions,” J. of Korean Society for Precision Engineering, vol. 8, no. 2, pp. 102-109, Mar. 2000.
  5. S.-J. Heo and K. Park, “Analysis of continuously variable damper characteristics for semi-active suspension systems,” J. of Korean Society for Precision Engineering, vol. 20, no. 7, pp. 128-137, Jul. 2003.
  6. J. W. Park and Y. D. Jung, “Magnetic circuit design methodology of MR CDC dampers for semi-active suspensions,” J. of Korean Society for Precision Engineering, vol. 20, no. 10, pp. 48-57, Oct. 2008.
  7. Y.-J. Nam, D.-U. Kim, M.-K. Park, and Y.-H. Lee, “Design and performance investigation of bypass-tType MR shock dampers,” Trans. Korean Society of Mechanical Engineers A, vol. 30, no. 5, pp. 550-559, May 2006. https://doi.org/10.3795/KSME-A.2006.30.5.550
  8. Y.-H. Yoon, M.-J. Choi, and K.-H. Kim, “Development of a reverse continuous variable damper for semi-active suspension,” Int. J. of Automot. Techn., vol. 3, no. 1, pp. 27-32, Mar. 2002.
  9. D, C. Karnopp, M. J. Crosby, and R. A. Harwood, “Vibration control using semi-active force generators,” ASME Journal of Engineering for Industry, vol. 96, no. 2, pp. 619-626, 1974. https://doi.org/10.1115/1.3438373
  10. Y. H. Lee and M. K. Park, “Skyhook control of a semi-Active ER damper,” J. of Korean Society of Precision Engineering, vol. 18, no. 1, pp 56-62, Jan. 2001.