International Journal of Fuzzy Logic and Intelligent Systems

Korean Institute of Intelligent Systems (한국지능시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Identification of Dynamic Load Model Parameters Using Particle Swarm Optimization

  • Kim, Young-Gon (Department of Electrical Engineering, Seoul Nat'l University of Technology) ;
  • Song, Hwa-Chang (Department of Electrical Engineering, Seoul Nat'l University of Technology) ;
  • Lee, Byong-Jun (School of Electrical Engineering, Korea University)
  • Received : 2010.01.07
  • Accepted : 2010.04.18
  • Published : 2010.06.25
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents a method for estimating the parameters of dynamic models for induction motor dominating loads. Using particle swarm optimization, the method finds the adequate set of parameters that best fit the sampling data from the measurement for a period of time, minimizing the error of the outputs, active and reactive power demands and satisfying the steady-state error criterion.

Keywords

References

  1. L. Ljung, System identification: theory for the user, London: Prentice-Hall, 1999.
  2. P. Kundur, Power system stability and control, McGraw Hill, 1994.
  3. C. W. Taylor, Power system voltage stability, McGraw Hill, 1994.
  4. T. Van Cutsem and C. Vournas, Voltage stability of electric power systems, Boston: Kluwer Academic Publishers, 1998, pp. 113-114.
  5. IEEE Task Force on Load Representation for Dynamic Performance, "Standard models for power flow and dynamic performance simulation," IEEE Transactions on Power Systems, vol. 10, pp. 1302-1313, 1995. https://doi.org/10.1109/59.466523
  6. D. J. Hill, "Nonlinear dynamic load models with recovery for voltage stability studies," IEEE Transactions on Power Systems, vol. 8, pp. 166-176, 1993. https://doi.org/10.1109/59.221270
  7. W. Xu and Y. Masour, "Voltage stability analysis using generic dynamic load models," IEEE Transactions on Power Systems, vol. 9, pp. 479-493, 1994. https://doi.org/10.1109/59.317575
  8. A. Ellis, D. Kosterev, and A. Meklin, "Dynamic load models: Where are we?," Proc. of 2005/2006 IEEE Transmission and Distribution and Exhibition, Dallas, TX. May 16-18, 2006.
  9. B. C. Lesieutre, P. W. Sauer, and M. A. Pai, "Development and comparative study of induction machine based dynamic P, Q load models," IEEE Transactions on Power Systems, vol. 10, pp. 182-188, 1995. https://doi.org/10.1109/59.373941
  10. H.-D. Chiang, J.-C. Wang, C.-T. Huang, Y.-T. Chen and C.-H. Huang, "Development of a dynamic ZIP-motor load model from on-line field measurements," Int’l Journal of Electrical Machine & Energy Systems, vol. 19, pp. 459-468, 1997. https://doi.org/10.1016/S0142-0615(97)00016-1
  11. Y. Li, H.-D. Chiang, B.-K. Choi, Y.-T. Chen, D.-H. Huang and M. G. Lauby, "Representative static load models for transient stability analysis: development and examination," IET Generation, Transmission and Distribution, vol.1, pp. 422-431, 2007. https://doi.org/10.1049/iet-gtd:20060044
  12. H. Bai, P. Zhang, and V. Ajjarapu, "A novel parameter identification approach via hybrid learning for aggregate load modeling," IEEE Transactions on Power Systems, vol. 24, pp. 1145-1154, 2009. https://doi.org/10.1109/TPWRS.2009.2022984
  13. R. Eberhart and J. Kennedy, "A new optimizer using particle swarm theory," Proc. of 6th International Symposium on Micro Machine and Human Science, Nagoya, Japan, 4-6 October 1995.
  14. A. Ide and K. Yasuda, "A basic study of adaptive particle swarm optimization," Electrical Engineering in Japan, vol. 151, March 2005, pp. 41-49. https://doi.org/10.1002/eej.20077
  15. PTI, PSS/E operational manual, Siemens PTI, 2005.
  16. Powertech Labs., TSAT user manual, Powertech Labs Inc., 2007.
  17. H. Song, R. Diolata, Y.H. Joo, "Photovoltaic system allocation using discrete particle swarm optimization with multi-level quantization," Journal of Electrical Engineering & Technology, vol. 4, no. 2, pp. 185-193, 2009. https://doi.org/10.5370/JEET.2009.4.2.185
  18. R.O. Burnett Jr. and M.M. Butts, "Power system applications for phasor measurement units," IEEE Computer Application in Power, vol. 7, no. 1, pp. 8-13, 1994. https://doi.org/10.1109/67.251311