일정축력을 받는 콘크리트 충전 각형기둥의 경계조건 변화에 따른 화재거동특성에 관한 실험적 연구

An Experimental Study on the Fire Behavior of CFT Column under the Constant Axial Loading Condition in Fire

  • 투고 : 2010.08.27
  • 심사 : 2010.12.10
  • 발행 : 2010.12.31

초록

콘크리트가 충전된 각형강관 기둥(CFT)은 외부에 강재가 노출된 형상으로 외측의 강관은 화재시 급격한 온도상승으로 인해 강도가 저하되나, 내부의 콘크리트는 열용량이 큰 재료로써 내화성능을 확보할 수 있는 구조로 구성되어 있다. CFT 기둥을 내화구조로서 적용하기 위해서는 구조적 성능에 영향을 미치는 인자에 대한 연구가 필요하며, 이에 대한 조건별 영향성에 관한 연구가 필요하다. 내화성능에 영향을 주는 주요인자는 콘크리트 압축강도.단면크기.축력비.경계조건이며, 그 중 기둥과 보의 경계조건은 구조적 측면에서 하중지지능력에 영향을 미치므로 내화성능을 지배하는 주요 인자 중에 하나이다. 실험결과 360단면에서는 양단 고정조건에서는 106분의 내화성능이 확보되나 양단 힌지 조건에서는 89분의 내화성능을 확보하는 것으로 나타났다. 280단면에서는 양단 고정조건에서는 113분의 내화성능이 확보되나 양단힌지 조건에서는 78분의 내화성능을 확보하였다.

A concrete filled square steel tube (CFT) is composed of the external steel material, which its strength is reduced in fire due to sudden temperature increase, and the internal concrete with high thermal capacity that can ensure the fire resistance performance of the structure. Therefore, research about the influence factors of the structural performance of CFT column is required in order to apply CFT column to a fire resisting structure, and additional research about influence for each condition is also necessary. Among the influence factors, the boundary condition between column and beam is important structurally, and it is one of the major factors that determine overall fire resisting performance. This study performed a fire experiment under loading in order to analyse the influences of CFT column to the boundary condition. As the results of the experiment, fire resistance time of 106 minutes was ensured for the clamped-end condition but 89 minutes for the hinge-end condition in case of the 360 cross section. And, fire resistance time of 113 minutes was ensured for the clamped-end condition but 78 minutes for the hinge-end condition in case of the 280 cross section.

키워드

참고문헌

  1. 국토해양부, "콘크리트 충전강관(CFT)구조의 내화성능 설계기술 개발- 3차년도 최종보고서", 한국건설교통기술평가원, pp.114-159(2009).
  2. Q.Q. Liang and B. Uy, "Parametric Study on the Structural Behaviour of Steel Plates in Concrete-filled Fabricated Thin-walled Box Columns", Advances in Structural Engineering, Vol.2, No.1, pp.57-71(1998). https://doi.org/10.1177/136943329800200108
  3. L.H. Han, Y.F. Yang, and Lei Xu, "An Experimental Study and Calculation on the Fire Resistance of Concrete-filled SHS and RHS Columns", J. Constr. Steel Research, Vol.59, pp.427-452(2003). https://doi.org/10.1016/S0143-974X(02)00041-X
  4. Q.Q. Liang, B. Uy, and R. Liew, "Nonlinear Analysis of Concrete-filled Thin - Walled Steel Box Columns with Local Buckling Effects", Journal of Construction Steel Research, Vol.62, pp.581-591 (2006). https://doi.org/10.1016/j.jcsr.2005.09.007
  5. Q.Q. Liang and B. Uy, "Theoretical Study on the Post-local Buckling of Steel Plates in Concretefilled Box Columns", Computers and Structures, Vol.75, No.5, pp.479-490(2000). https://doi.org/10.1016/S0045-7949(99)00104-2
  6. T.T. Lie, Structural fire protection. Manuals and reports on engineering practice, Vol. 78. New York (NY): ASCE(1992).
  7. T.T. Lie and R.J. Irwin, Fire resistance of rectangular steel columns filled with bar-reinforced concrete, Journal of Structural Engineering, ASCE, pp.797-805(1995).
  8. L.-H. Han, X.-L. Zhao, M. Asce, Y.-F. Yang, and J.-B. Feng, Experimental Study and Calculation of Fire Resistance of Concrete-Filled Hollow Steel Columns, Journal of Structural Engineering, pp. 346-355(2003).