DOI QR코드

DOI QR Code

단상 유도전동기의 무부하손실을 고려한 등가회로 정수의 결정

Determination of Parameters of Equivalent Circuit Taking No-Load Losses Into Account for Single-Phase Induction Motors

  • 투고 : 2010.08.17
  • 심사 : 2010.10.07
  • 발행 : 2010.12.01

초록

This paper proposes a step-by-step method of determining the parameters of equivalent circuit which is considered the no load losses for the single phase induction motor which has the starting winding. This method is comprised of three steps, and the stator resistance which is measured by the method of voltage drop is treated as constant and the stator and the rotor leakage reactances are assumed to be the same in every step. The test results of no load and locked rotor test are used in the 1st and 2nd step, and the ratings of name plate of the motor are needed in the 3rd step. In the 1st step, the traditional equivalent circuit parameters are directly calculated by no load and locked rotor conditions. In the next step, five nonlinear simultaneous equations for five unknown parameters can be set up by no load and locked rotor equivalent circuits. These equations are solved by using the initial parameters obtained by the 1st step parameters. In the final step, three nonlinear simultaneous equations for rotor winding resistance, leakage reactance and no load losses component resistance can be set up by equivalent circuit under the rated operation. Three parameters are solved by using the 2nd step parameters. Thus, equivalent circuit parameters are gradually refined step by step. The validity of the proposed method is evaluated by comparing the computed values obtained by the equivalent circuit parameters with the experimental values of the load test.

키워드

참고문헌

  1. Paresh C. Sen, Principles of Electric Machines and Power Electronics, John Wiley & Sons, Inc., 1997.
  2. Irving L. Kosow, Electric Machinery and Transformers, Prentice Hall International, Inc., 1991.
  3. 오긍렬, 순단상 유도전동기의 등가회로와 도식적 특성 산정법 및 정수결정에 의한 특성산정법, 전기학회지, Vol.22, No. 1, pp.42-51, 1973. 1.
  4. E. R. Colins, Jr. and P. B. Boyd, Improved Method for Determining the Equivalent Circuit Parameters for Single-Phase Induction Motor Models, IAS Annual meeting, Vol, 1, pp. 390-397, Oct. 1993.
  5. 강규홍, 하경호, 홍정표, 김규탁, 정승규, 등가회로법과 수치해석의 결합에 의한 콘덴서 구동형 단상 유도전동 기의 회로정수 산정 및 특성해석, 전기학회논문지, Vol.49B, No. 11, pp. 720-728, 2000. 11.
  6. Bijan Zahedi and Sadegh Vaez-Zadeh, Analysis of Electrical Loss in Single Phase Induction Motors, Electric Machines and Drive Conference, IEMDC'07 IIEEE International, Vol. 2, pp. 1621-1625, May 2007.
  7. 김광수, 김기찬, 이성구, 고성철, 전연도, 이철규, 이주, 커패시터 구동형 단상 유도전동기의 손실분리에 대한 연구, 전기학회 논문지, Vol. 57, No. 9, pp. 1546-1551, 2008. 9.
  8. M, H, Haque, Determination of NEMA Design Induction Motor Parameters from Manufacturer Data, IEEE Trans. on EC, Vol. 23, No. 4, pp.997-1004, Dec. 2008.
  9. IEE Standards 114, IEEE Standard Test Procedure for Single - Phase Induction Motors, Industry Applications Society, May 2002.