DOI QR코드

DOI QR Code

관형 코로나 방전전극을 이용한 이온풍속의 최대화

An Maximization of Ionic Wind Utilizing a Cylindrical Corona Electrode

  • 정재승 (경북대 대학원 전자전기컴퓨터학부) ;
  • 문재덕 (경북대 전자전기컴퓨터학부)
  • 투고 : 2010.09.07
  • 심사 : 2010.11.29
  • 발행 : 2010.12.01

초록

A corona discharge system with needle point or wire type corona electrode has been well used as an ionic wind blower. The corona discharge system with a needle point electrode produces ions at lower applied voltage effectively. However, the corona discharge on the needle point electrode transits to the arc discharge at lower voltage, and it is hard to obtain the elevated electric field in the discharge airgap for enhancing the ion migration velocity due to the weak Coulomb force. A cylindrical corona electrode with sharp round tip is reported as one of effective corona electrode, because of its higher breakdown voltage than that of the needle electrode. A basic study, for the effectiveness of cylindrical electrode shape on the ionic wind generation, has been investigated to obtain an maximum wind velocity, which however is the final goal for the real field application of this kind ionic wind blower. In this paper, a parametric study for maximizing the ionic wind velocity utilizing the cylindrical corona electrode and a maximum ion wind velocity of 4.1 m/s were obtained, which is about 1.8 times higher than that of 2.3m/s obtained with the needle corona electrode from the velocity profile.

키워드

참고문헌

  1. A. Rashkovan, E. Sher, and H. Kalman, "Experimental optimization of an electric blower by corona wind", Applied Thermal Engineering, Vol. 22, No. 14, pp. 1587-1599, 2002. https://doi.org/10.1016/S1359-4311(02)00082-0
  2. M. Rickard, D. Dunn-Rankin, F. Weinberg, and F. Carleton. "Maximizing ion-driven gas flows", Journal of Electrostatics, Vol. 64, No. 6, 368-376, 2006. https://doi.org/10.1016/j.elstat.2005.09.005
  3. H. Tsubone, J. Ueno, B. Komeili, S. Minami, G.D Harvel, K. Urashima, C.Y. Ching, and J.S Chang, "Flow characteristics of dc wire- non-parallel plate electrohydrodynamic gas pump", Journal of Electrostatics, Vol. 66, No. 1-2, pp. 115-121, 2008. https://doi.org/10.1016/j.elstat.2007.09.002
  4. R. Mestiri, R. Hadaji, and S.B. Nasrallah, "The electrical discharge as a source of a mechanical energy", Desalination, Vol. 220, No. 1-3, pp. 468-475, 2008. https://doi.org/10.1016/j.desal.2007.01.048
  5. E. Moreau and G. Touchard, "Enhancing the mechanical efficiency of electric wind in corona discharge", Journal of Electrostatics, Vol. 66, No. 1-2, pp. 39-44, 2008. https://doi.org/10.1016/j.elstat.2007.08.006
  6. J.-D. Moon, D.-h. Hwang, and S.-T. Geum, "An EHD Gas Pump Utilizing a Ring/Needle Electrode," IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 16, No. 2, pp. 352-358, 2009. https://doi.org/10.1109/TDEI.2009.4815163
  7. M Rickard, D. Dunn-Rankin, F. Weinberg, and F. Carleton, "Characterization of ionic wind velocity," Journal of Electrostatics, Vol. 63, No. 6-10, pp. 711-716, 2005. https://doi.org/10.1016/j.elstat.2005.03.033
  8. 정재승, 문재덕, "금속관형 코로나 방전극을 적용한 효과적인 이온풍 발생," 전기학회논문지, 6호, 59권, pp. 599-603, 2010.
  9. 정재승, 김진규, 이우석, 문재덕, "금속관대 그물형 방전 전극간의 이온풍 특성 기초연구," 2010년도 대한전기학회 하계학술대회(2010.7.14-16), DHP001.
  10. Harry J. White, Electrical Precipitation, Addison- Wesley Publishing Co. Inc. USA, 1963, pp. 97-99.
  11. 田春生, 放電∙高電壓工學, 서울:동명사, 1980, pp. 94-99.
  12. S. Masuda and J.-D. Moon, "Electrostatic Precipitation of Carbon Soot from Diesel Engine Exhaust," IEEE Transactions on Industry Applications, Vol. 19, No. 6, pp. 1104-1111, 1983.