The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Performance Evaluation of Small-Scaled Wind Power Generator with Outer Permanent Magnet Rotor considering Electromagnetic Losses (1) - Magnetic Field Analysis and Electrical Parameters Derivation using Electromagnetic Transfer Relations Theorem -

전자기 손실을 고려한 소형 외전형 영구자석 풍력발전기의 성능 평가 (1) - 전자기 전달관계 기법을 이용한 자계특성해석 및 회로정수 도출 -

  • Received : 2010.08.26
  • Accepted : 2010.11.10
  • Published : 2010.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper deals with analytical techniques for performance evaluation of small scaled wind power generator with outer permanent magnet rotor. In part (1), using transfer relations theorem, magnetic field distribution characteristics by PM and armature reaction field are derived. Moreover, electrical parameters such as back-EMF, inductance and resistance are calculated from the obtained field characteristic equations. The proposed analytical techniques are validated by nonlinear finite element method using commercial software 'Maxwell' and performance experiments of the manufactured generator. In part (2), generating characteristics analysis such as constant speed characteristics and constant resistive load characteristics, and performance evaluation according to variation of wind speed will be accomplished using the derived electrical parameters.

Keywords

References

  1. A. J. G. Westlake, J.R. Bumpy and E. Spooner, "Damping the Power-angle Oscillations of a Permanent-Magnet Synchronous Generator with Particular Reference to Wind Turbine Applications," IEE Proc.-Electr. Power. Appl., vol. 143, pp.269-280, May. 1996. https://doi.org/10.1049/ip-epa:19960285
  2. W. wu, V. S. Ramsden, T. Crawford and G. Hill, "A Low-Speed, High-Torque, Direct Drive Permanent Magnet Generator for Wind Turbines," IEEE Industry Applications Conference, Vol. 1, pp. 147-154, Oct. 2000.
  3. Z.Q.Zhu, D.Howe, E. Bolte, B. Ackermann, "Insantaneous magnetic field distribution in brushless permanent magnet dc motors, Part I:open-circuit field," IEEE Trans. Magn., vol.29, pp.124-135, Jan. 1993. https://doi.org/10.1109/20.195557
  4. Z.Q.Zhu, D.Howe, "Insantaneous magnetic field distribution in brushless permanent magnet dc motors, Part II:Armature-reaction field," IEEE Trans. Magn., vol.29, pp.136-142, Jan. 1993. https://doi.org/10.1109/20.195558
  5. Z.Q.Zhu, D.Howe, E. Bolte, B. Ackermann, "Insantaneous magnetic field distribution in brushless permanent magnet dc motors, Part III:Effect of stator slotting,"IEEE Trans. Magn.,vol.29, 143-151, Jan.1993. https://doi.org/10.1109/20.195559
  6. Z.Q.Zhu, D.Howe, E. Bolte, B. Ackermann, "Insantaneous magnetic field distribution in brushless permanent magnet dc motors, Part IV:Magnetic field on load," IEEE Trans. Magn., vol.29, 152-158, Jan. 1993. https://doi.org/10.1109/20.195560
  7. J. Wang, G. W. Jewell, D. Howe,"A general framework for the analysis and design of tubular linear permanent magnet machines," IEEE Trans. Magn., vol.35, pp.1986-2000, May 1999. https://doi.org/10.1109/20.764898
  8. J. R. Melcher, "Continuum Electromechanics," Cambridge, MA: MIT Press, 1981.
  9. David L. Trumper, Won-Jong Kim, Mark E. Williams, "Design and analysis framework for linear permanent magnet machines," IEEE Trans. IAS., vol. 32, no. 2, pp. 371-379, March/April 1996.
  10. Kent R. Davey, "Analytic analysis of single -and three phase induction motors," IEEE Trans. Mag., vol. 34, Sept. 1998.
  11. Duane C. Hanselman, "Brushless Permanent Magnet Motor Design," The Writer's collective, 2003.
  12. J. R. Hendershor Jr., and T. J. E. Miller, "Design of Brushless Permanent Magnet Motors," Oxford, 1994.