참고문헌
- P. Blake, T. Bifano, T. Dow, and R. O. Scattergood, “Precision Machining of Ceramic Materials,” Ceram. Bull., 67 [6] 1038-43 (1988).
- C. K. Chyung, G. H. Beall, and D. G. Grossman, “Microstructure and Mechanical Properties of Mica Glass-Ceramics,” pp. 1167-1194 in 10th Int. Congress on Glass. Ed. by M. Kunugi et. al., Kyoto, 1974.
-
B. Ashouri Rad and P. Alizade, “Pressureless Sintering and Mechanical Properties of
$SiO_{2}-Al_{2}O_{3}-MgO-K_{2}O-TiO_{2}-F(CaO-Na_{2}O)$ Machinable Glass-ceramics,” Ceram. Int., 35 2775-80 (2009). https://doi.org/10.1016/j.ceramint.2009.03.027 - S. Taruta, R. Fujisawa, and K. Kitajima, “Preparation and Mechanical Properties of Machinable Alumina/mica Composites,” J. Eur. Ceram. Soc., 26 1687-93 (2006). https://doi.org/10.1016/j.jeurceramsoc.2005.03.258
-
Y. Li, G. Quio, and Z. Jin, “Machinable
$Al_{2}O_{3}$ -BN Composite Ceramics with Strong Mechanical Properties,” Mater. Res. Bull., 37 1401-9 (2002). https://doi.org/10.1016/S0025-5408(02)00786-9 -
X. Zhang, R. Zhang, G. Chen, and W. Han, “Microstructure, Mechanical Properties and Thermal Shock Resistance of Hot-pressed
$ZrO_2$ (3Y)-BN Composites,” Mater. Sci. Eng. A, 497 195-99 (2008). https://doi.org/10.1016/j.msea.2008.06.038 -
H. Wu and W. Zhang, “Fabrication and Properties of
$ZrB_2$ -SiC-BN Machinable Ceramics,” J. Eur. Ceram. Soc., 30 1035-42 (2010). https://doi.org/10.1016/j.jeurceramsoc.2009.09.022 - A. A. Buchheit, G. E. Hilmas, W. G. Fahrenholtz, D. M. Deason, and H. Wang, “Mechanical and Thermal Properties of AlN-BN-SiC Ceramics,” Mater. Sci. Eng. A, 494 239-46 (2008). https://doi.org/10.1016/j.msea.2008.05.051
- Y. S. Yoon, J. H. Lee, W. S. Cho, M. W. Cho, and E. S. Lee, “Mechanical Properties and Machinability of Machinable Ceramics (in Korean),” Ceramist, 6 [3] 12-7 (2003).
- S.-Y. Beck, M-W. Cho, and W.-S. Cho, “Mechanical Properties and End-milling Characteristics of AlN-hBN Based Machinable Ceramics,” J. Kor. Ceram. Soc., 45 [1] 77-81 (2008).
- T. Yamaguchi, “Technology of Characterization to Ceramics(in Japan),” Ceramics, 19 [6] 520-29 (1984).
- H. A. J Thomas and R. Stevens “Aluminium Titanate - A Literature Review,” Br. Ceram. Trans. J., 88 144-51 (1989).
-
I. J. Kim and C. Zografou, “Thermal Shock Resistance of
$Al_{2}TiO_{5}$ Ceramics Prepared from Electrofused Powders,” J. Kor. Ceram. Soc., 35 [10] 1061-69 (1998). -
I. J. Kim, H. B. Lee, and Y. S. Ko, “Application of
$Al_{2}TiO_{5}$ Ceramics to Automobile Engine(in Korean),” Ceram. Tech., 10 [1] 68-75 (1995). -
I. J. Kim, H. B. Lee, and Y. S. Ko, “Application of
$Al_{2}TiO_{5}$ Ceramics to High Temperature Structural Material Industry(in Korean),” Ceram. Tech., 10 [3] 283-88 (1995). - S.-Y. Park, S.-W. Jung, and Y.-B. Chung, “The Effect of Starting Powder on the Microstructure Development of Alumina-aluminium Titanate Composites,” Ceram. Int., 29 707-12 (2003). https://doi.org/10.1016/S0272-8842(02)00221-3
-
S. W. Kim, H. J. Lee, and H. L. Lee, “Effects of MgO and
$SiO_2$ on Thermal Decomposition of$Al_{2}TiO_{5}$ ,” J. Kor. Ceram. Soc., 36 [4] 425-31 (1999). -
S. W. Kim, H. J. Lee, and H. L. Lee, “Effects of Bicomponent Additives on Thermal Decomposition of
$Al_{2}TiO_{5}$ ,” J. Kor. Ceram. Soc., 36 [6] 632-39 (1999). -
R. Raj, “Fundamental Research in Structural Ceramics for Service Near 2000
${\circ}$ C,” J. Am. Ceram. Soc., 76 [9] 2147-74 (1993). https://doi.org/10.1111/j.1151-2916.1993.tb07750.x - S. Bueno, L. Micele, C. Baudin, and G. de Portu, “Reduced Strength Degradation of Alumina-aluminium Titanate Composite Subjected to Low-velocity Impact Loading,” J. Eur. Ceram. Soc., 28 2923-31 (2008). https://doi.org/10.1016/j.jeurceramsoc.2008.04.024
피인용 문헌
- vol.50, pp.6, 2013, https://doi.org/10.4191/kcers.2013.50.6.372
- Fabrication and Machinability of Mullite-ZrO2-Al2TiO5 Ceramics vol.52, pp.6, 2015, https://doi.org/10.4191/kcers.2015.52.6.423