Korean Journal of Metals and Materials (대한금속재료학회지)

The Korean Institute of Metals and Materials (대한금속재료학회)
권호 표지

Effect of Primary Recrystallization Texture on the Formation of Grain Growth Texture in Aluminum 1050 Sheet

알루미늄 1050계 판재에서 결정립 성장 집합조직에 미치는 재결정 집합조직의 영향

  • Kim, Hyun-Chul (Department of Materials Science and Engineering, Korea University) ;
  • Kang, Hyung-Gu (Department of Materials Science and Engineering, Korea University) ;
  • Huh, Moo-Young (Department of Materials Science and Engineering, Korea University)
  • 김현철 (고려대학교 신소재공학부) ;
  • 강형구 (고려대학교 신소재공학부) ;
  • 허무영 (고려대학교 신소재공학부)
  • Received : 2009.01.06
  • Published : 2009.06.25
⟨ Previous Next ⟩

Abstract

In order to vary the primary recrystallization textures, AA 1050 sheets were cold rolled in two different manners. Differences in cold rolling schedule gave rise to the formation of different cold rolling textures also leading to the formation of different primary recrystallization textures. Upon annealing for grain growth, changes in microstructure and texture hardly occurred in the sample depicting Cube recrystallization texture, while grain growth was accompanied with the development {001}<100> Cube texture in the sample displaying a recrystallization texture comprising of weak rolling texture components. The selective growth of Cube oriented grains is attributed to the high mobility of their grain boundaries.

Keywords

References

  1. M. Y. Huh, K. R. Lee, and O. Engler, Inter. J. Plast. 20, 1183 (2004) https://doi.org/10.1016/j.ijplas.2003.08.003
  2. O. Engler, M. Y. Huh, and C. N. Tome, Metall. Mater. Trans. 31A, 2299 (2000) https://doi.org/10.1007/s11661-000-0146-7
  3. H. G. Kang, J. K. Kim, M. Y. Huh, and O. Engler, Mater. Sci. Eng. A 452, 347 (2007) https://doi.org/10.1016/j.msea.2006.10.130
  4. C.-H. Choi, J.-W. Kwon, K. H. Oh, and D. N. Lee, Acta Mater. 45, 5119 (1997) https://doi.org/10.1016/S1359-6454(97)00169-9
  5. S. Matsuoka, M. Morita, O. Furukimi, and T. Obara, ISIJ Int. 38, 633 (1998) https://doi.org/10.2355/isijinternational.38.633
  6. W. C. Liu, B. Radhakrishnan, Z. Lic, and J. G. Morris, Mater. Sci. Eng. A 472, 170 (2008) https://doi.org/10.1016/j.msea.2007.03.024
  7. J. Z. Chen, L. Zhen, W. Z. Shao, S. L. Dai, and Y. X. Cui, Mater. Lett. 62, 88 (2008) https://doi.org/10.1016/j.matlet.2007.04.074
  8. M. Y. Huh, J. C. Park, and S. T. Lee, Met. Mater. 2, 141 (1996) https://doi.org/10.1007/BF03026088
  9. M. Y. Huh, E. P. Yoon, and S. T. Lee, J. Kor. Inst. Met. & Mater. 35, 872 (1997)
  10. Y. H. Kim, Y. S. Cho, and M. Y. Huh, J. Kor. Inst. Met. & Mater. 36, 303 (1998)
  11. S. Y. Cho, M. Y. Huh, and S. U. An, J. Kor. Inst. Met. & Mater. 39, 43 (2001)
  12. J. K. Kim, Y. K. Jee, M. Y. Huh, and H. T. Jeong, J. Mater. Sci. 39, 5365 (2004) https://doi.org/10.1023/B:JMSC.0000039246.72708.0a
  13. J. J. Nah, H. G. Kang, M. Y. Huh, and O. Engler, Scripta Mater. 58, 500 (2008) https://doi.org/10.1016/j.scriptamat.2007.10.049
  14. K. H. Kim and D. N. Lee, Acta Mater. 49, 2583 (2001) https://doi.org/10.1016/S1359-6454(01)00036-2
  15. J. Hirsch and K. Lücke, Acta Metall. 36, 2863 (1988) https://doi.org/10.1016/0001-6160(88)90172-1
  16. O. Engler and M. Y. Huh, Mater. Sci. Eng. A 271, 371 (1999) https://doi.org/10.1016/S0921-5093(99)00254-3
  17. Cl. Maurice and J. H. Driver, Acta Mater. 45, 4627 (1997) https://doi.org/10.1016/S1359-6454(97)00115-8
  18. F. J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, Elsevier, Amsterdam (1996)
  19. I. Samajdar, B. Verlinden, L. Rabet, and P. Van Houtte, Mater. Sci. Eng. A 266, 146 (1999) https://doi.org/10.1016/S0921-5093(99)00022-2
  20. T. Kamijo and A. Fujiwara, Scripta Metall. 25, 949 (1991) https://doi.org/10.1016/0956-716X(91)90255-Y
  21. T. Kamijo, S. Kataoka, and H. Inagaki, Acta Metall. Mater. 41, 1713 (1993) https://doi.org/10.1016/0956-7151(93)90190-4
  22. O. Engler, P. Yang, and X. W. Kong, Acta Mater. 44, 3349 (1996) https://doi.org/10.1016/1359-6454(95)00416-5
  23. H. E. Vatne, T. Furu, and E. Nes, Mater. Sci. Tech. 12, 201 (1996) https://doi.org/10.1179/026708396790165678
  24. J. Hjelen, R. Orsund, and E. Nes, Acta Metall. Mater. 39, 1377 (1991) https://doi.org/10.1016/0956-7151(91)90225-P
  25. R. D. Doherty, I. Samajdar, C. T. Necker, H. E. Vatne, and E. Nes, Proc. 16th Riso Int. Symp. (eds. N. Hansen et al.), p.1, Riso Nat. Lab., Roskilde, Denmark (1995)
  26. N. Ma, A. Kazaryan, S. A. Dregia, and Y. Wang, Acta. Mater. 52, 3869 (2004) https://doi.org/10.1016/j.actamat.2004.05.001
  27. H. N. Lee, H. S. Ryoo, and S. K. Hwang, Mater. Sci. Eng. A 281, 176 (2000) https://doi.org/10.1016/S0921-5093(99)00725-X
  28. E. A. Holm, G. N. Hassold, and M. A. Miodownik, Acta. Mater. 49, 2981 (2001) https://doi.org/10.1016/S1359-6454(01)00207-5
  29. H. J. Bunge, Texture Analysis in Materials Science, Butterworths, London (1982)
  30. V. Randle and O. Engler, Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, Gordon and Breach Sci. Publ., Amsterdam (2000)
  31. M. C. Theyssier and J. H. Driver, Mater. Sci. Eng. A 272, 73 (1999) https://doi.org/10.1016/S0921-5093(99)00469-4
  32. B. J. Duggan, K. Lucke, G. Kohlhoff, and C. S. Lee, Acta Metall. 41, 1921 (1993) https://doi.org/10.1016/0956-7151(93)90211-A