Food Science and Biotechnology

  • 제18권5호
  • /
  • Pages.1155-1160
  • /
  • 2009
  • /
  • 1226-7708(pISSN)
  • /
  • 2092-6456(eISSN)
한국식품과학회 (Korean Society of Food Science and Technology)
권호 표지

Effect of Coating Methods on the Properties of Poly(lactide)-coated Paperboard: Solution Coating vs. Thermo-compression Coating

  • 발행 : 2009.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Poly(lactide) (PLA)-coated paperboards were prepared by solution coating and thermo-compression coating methods and their effect of coating on the packaging properties such as tensile, water resistance, water vapor barrier, and heat sealing properties was tested. Compared with uncoated control paperboard, tensile strength (TS) of PLA-coated paperboard increased profoundly (2.2-2.6 folds) with slight increase in elongation at break (E). Water absorptiveness (WA) of the paperboard decreased 74-170 folds and water vapor permeability (WVP) decreased 6.3-22.1 folds by coating with PLA, which indicates an increase in the hydrophobicity of the surface of paperboard. Compared with polyethylene (PE)-coated paperboard, both PLA-coated paperboard exhibited 2.3 time higher heat sealing strength. In addition, the PLA-coated paperboards showed equal or higher wet TS than PE-coated paperboard. All the test results showed that the paperboard coated by the thermo-compression coating method was similar to or better than those of coated by the solution coating method.

키워드

참고문헌

  1. Soroka W. Paperboard cartons. pp. 117-142. In: Fundamentals of Packaging Technology. IPP (ed). Institute of Packaging Professionals, Herndon, VA, USA (1999)
  2. Robertson GL. Paper and paper-based packaging materials. pp. 144- 172. In: Food Packaging, Principles, and Practice. Robertson GL (ed). Marcel Dekker Inc., New York, NY, USA (1993)
  3. Krook M, G$\ddot{a}$llstedt M, Hedenqvist MS. A study on montmorillonite/ polyethylene nanocomposite extrusion-coated paperboard. Packag. Technol. Sci. 18: 11-20 (2005) https://doi.org/10.1002/pts.670
  4. Robson NC. Recycling practice and problems. pp. 173-189. In: International Symposium on Packaging, Economic Development, and the Environment. IPP (ed). Institute of Packaging Professionals, Herndon, VA, USA (1993)
  5. Rhim JW, Kim JH. Properties of poly(lactide)-coated paperboard for the use of one-way paper cup. J. Food Sci. 74: E105-E111 (2009) https://doi.org/10.1111/j.1750-3841.2009.01073.x
  6. Trezza TA, Vergano PJ. Grease resistance of corn zein coated paper. J. Food Sci. 59: 912-915 (1994) https://doi.org/10.1111/j.1365-2621.1994.tb08156.x
  7. Parris N, Dickey LC, Wiles JL, Moreau AU, Cooke PH. Enzymatic hydrolysis, grease permeation, and water barrier properties of zein isolate coated paper. J. Agr. Food Chem. 48: 890-894 (2000) https://doi.org/10.1021/jf991079y
  8. Han JH, Krochta JM. Wetting properties and water vapor permeability of whey-protein-coated paper. T. ASAE 42: 1375-1382 (1999)
  9. G$\ddot{a}$llstedt M, Brottman A, Hedenqvist MS. Packaging-related properties of protein- and chitosan-coated paper. Packag. Technol. Sci. 18: 161-170 (2005) https://doi.org/10.1002/pts.685
  10. Han JH, Krochta JM. Physical properties and oil absorption of whey-protein-coated paper. J. Food Sci. 66: 294-299 (2001) https://doi.org/10.1111/j.1365-2621.2001.tb11335.x
  11. Lin SY, Krochta JM. Plasticizer effect on grease barrier and color properties of whey-protein coatings on paperboard. J. Food Sci. 68: 229-233 (2003) https://doi.org/10.1111/j.1365-2621.2003.tb14144.x
  12. Rhim JW, Lee JH, Hong SI. Water resistance and mechanical properties of biopolymer (alginate and soy protein) coated paperboards. LWT-Food Sci. Technol. 39: 806-813 (2006) https://doi.org/10.1016/j.lwt.2005.05.008
  13. Park HJ, Kim SH, Lim ST, Shin DH, Choi SY, Hwang KT. Grease resistance and mechanical properties of isolated soy protein-coated paper. J. Am. Oil Chem. Soc. 77: 269-273 (2000) https://doi.org/10.1007/s11746-000-0044-2
  14. Rhim JW, Hwang KT, Park HJ, Kang SK, Jung ST. Lipid penetration characteristics of carrageenan-based edible films. Korean J. Food Sci. Technol. 30: 379-384 (1998)
  15. Rhim JW, Lee JH, Hong SI. Increase in water resistance of paperboard by coating with poly(lactide). Packag. Technol. Sci. 20: 393-402 (2007) https://doi.org/10.1002/pts.767
  16. Garlotta DA. Literature review of poly(lactide). J. Polym. Environ. 9: 63-84 (2001) https://doi.org/10.1023/A:1020200822435
  17. Drumright RE, Gruber PR, Henton DE. Polylactic acid technology. Adv. Mater. 12: 1841-1846 (2000) https://doi.org/10.1002/1521-4095(200012)12:23<1841::AID-ADMA1841>3.0.CO;2-E
  18. Lim LT, Auras R, Rubino M. Processing technologies for poly(lactic acid). Prog. Polym. Sci. 33: 820-852 (2008) https://doi.org/10.1016/j.progpolymsci.2008.05.004
  19. Conn RE, Kolstad JJ, Borzelleca JF, Dixler DS, Filer LJ, LaDu BN, Pariza MW. Safety assessment of polylactide (PLA) for use as a food-contact polymer. Food Chem. Toxicol. 33: 273-283 (1995) https://doi.org/10.1016/0278-6915(94)00145-E
  20. Rhim JW, Mohanty AK, Singh SP, Ng PKW. Effect of the processing methods on the performance of polylactide films: Thermocompression versus solvent casting. J. Appl. Polym. Sci. 101: 3736-3742 (2006) https://doi.org/10.1002/app.23403
  21. Rhim JW, Mohanty AK, Singh SP, Ng PKW. Preparation and properties of biodegradable multiplayer films based on soy protein isolate and poly(lactide). Ind. Eng. Chem. Res. 45: 3059-3066 (2006) https://doi.org/10.1021/ie051207+
  22. Lee JH, Rhim JW. Polylactic acid coating affects the ring crush strength of paperboards. J. Korean Tech. Assoc. Pulp Paper Ind. 38(5): 54-59 (2006)
  23. Gennadios A, Weller CL, Gooding CH. Measurement errors in water vapor permeability of highly permeable, hydrophilic edible films. J. Food Eng. 21: 395-409 (1994) https://doi.org/10.1016/0260-8774(94)90062-0
  24. Rhim JW, Gennadios A, Handa A, Weller CL, Hanna MA. Solubility, tensile, and color properties of modified soy protein isolate films. J. Agr. Food Chem. 48: 4937-4941 (2000) https://doi.org/10.1021/jf0005418