DOI QR코드

DOI QR Code

비순정품 자동차 머플러의 성능개선

Study on the Performance Improvement of the Aftermarket Automotive Muffler

  • 이성원 (공주대학교 일반대학원 기계공학과) ;
  • 최두석 (공주대학교 기계자동차공학부) ;
  • 박성영 (공주대학교 기계자동차공학부)
  • Lee, Sung-Won (Mechanical Engineering Dept., Graduate School, Kongju National University) ;
  • Choi, Doo-Seuk (Div. of Mechanical & Automotive Engineering, Kongju National University) ;
  • Park, Sung-Young (Div. of Mechanical & Automotive Engineering, Kongju National University)
  • 발행 : 2009.10.31

초록

비순정품 머플러는 경험에 의존하여 개발하는 경우가 다수이며, 국내에서는 그 해석과 평가가 미흡한 실정이다. 기존 비순정품 머플러는 지나치게 높은 압력강하량으로 인하여 엔진의 순조로운 작동을 저해하였다. 본 연구에서는 1500cc 가솔린 엔진의 비순정품 머플러의 압력강하량 저감을 위하여 각종 해석과 실험을 수행하였다. 다양한 모델을 실험한 결과, 동등한 흡음효과를 가지면서 기존의 비순정품 머플러 대비 우수한 압력강하량과 진동 특성을 가지는 머플러를 개발하였다. 개발된 머플러는 압력펄스에 기인하여 진동을 발생시키는 폐쇄된 공간을 배제하고 입구파이프를 이분화하는 구조를 가지고 있다.

Aftermarket muffler has been developed mainly by personal experience and trial-and error and has not been properly simulated or evaluated its performance. One of the aftermarket muffler problems is that the aftermarket muffler has quite high pressure-drop across the passage. To reduce the pressure-drop, various simulation and test has been performed for various muffler models. As a result, the muffler that has superior pressure-drop and vibration characteristics compared to the previous muffler has been developed. Developed aftermarket muffler has a structure that avoids confined space causing vibration due to exhaust pressure pulsation and bisects an inlet pipe from the engine.

키워드

참고문헌

  1. L. H. Bell and D. H. bell, "Industrial Noise Control", Marcel Dekker, 1994.
  2. P. H. Smith and J. C Morrison, "The Scientific Design of Exhaust and Intake Systems", Robert Bentley Inc., 1971.
  3. 이정권, "배기소음기의 음향 해석 및 설계 : I. 구조에 따른 작동원리", Transaction of KSAE, Vol. 16, No. 4, pp.37-50, 1994.
  4. M. L. Munjal, "Analysis and Design of Mufflers-An Overview of Research at the Indian Institute of Science", Journal of Sound and Vibration, Vol. 211, No. 3, pp.425-433, 1998. https://doi.org/10.1006/jsvi.1997.1309
  5. 이정권, "배기소음기의 음향 해석 및 설계 : II. 음향성능의 표현법", Transaction of KSAE, Vol. 16, No. 5, pp.10-19, 1994.
  6. K. S. Peat and K. L. Rathi, "A Finite Element Analysis of The Convected Acoustic Wave Motion in Dissipative Silencers", Journal of Sound and Vibration, Vol. 184, No. 3, pp.529-545, 1995. https://doi.org/10.1006/jsvi.1995.0331
  7. 이정권, "배기소음기의 음향 해석 및 설계 : III. 선형 모델링 및 설계지침", Transaction of KSAE, Vol. 17, No. 1, pp. 20-30, 1995.
  8. A. Selamet and P. M. Radavich "The Effect of Length on The Acoustic Attenuation Performance of Concentric Expansion Chambers: An Analytical, Computational and Experimental Investigation", Journal of Sound and Vibration, Vol. 201, No. 4, pp.407-426, 1997. https://doi.org/10.1006/jsvi.1996.0720
  9. J. F. Dowling and K. S. Peat, "An Algorithm for The Efficient acoustic analysis of Silencers of Any General Geometry", Journal of Sound and Vibration, Vol. 65, pp.211-227, 2004.
  10. R. Kirby, "Simplified Techniques for Predicting The Transmission Loss of A Circular Dissipative Silencer", Journal of Sound and Vibration, Vol. 243, No. 3, pp.403-426, 2001. https://doi.org/10.1006/jsvi.2000.3425
  11. E. Dokumaci, "Sound Transmission in Mufflers with Multiple Perforated Co-Axial Pipes", Journal of Sound and Vibration, Vol. 247, No. 3, pp.379-387, 2001. https://doi.org/10.1006/jsvi.2000.3381
  12. 이성원, 박성영, "유동 및 소음해석을 통한 Aftermarket 자동차 머플러의 성능개선", 한국자동차공학회 대전충청지부 2008년도 춘계학술대회 논문집 pp.71-78, 2008.
  13. NIKA GmbH, "COSMOS-FloWorks User's Manual", 2007.
  14. Gamma Technology, "GT-Power User's Manual Version 6.2", 2006.