Tunnel and Underground Space (터널과지하공간)

Korean Society for Rock Mechanics and Rock Engineering (한국암반공학회)
권호 표지

Behavioral Characteristics of Rocks on Indirect Tests

암석의 역학지수 추정을 위한 간접시험법의 거동특성

  • Published : 2009.10.30
Download PDF
⟨ Previous Next ⟩

Abstract

To analyze the behavioral characteristics of rocks on indirect tests and uniaxial compressive strength, researchers have investigated 1417 pieces of rock block, which include igneous, metamorphic and sedimentary rocks in Korea. The same behavioral characteristics have been shown in every type of sedimentary rock and in the same species of rock in the case of Brazilian strength application. This suggests that correlations of rocks for geological considerations can lead to high reliability of the experimental results in case of an indirect method.

본 연구는 국내에서 출토되는 화성암, 변성암, 퇴적암 1,417개 블록의 일축압축강도를 간접방법으로 도출하는 과정에서 각 시험법에 따른 강도발현의 거동 특성을 분석하였다. 퇴적암은 간접시험법에 따라 암석군에 상관없이 동일거동을 보이며, 압열인장강도를 매개로 시행한 과정에서는 암석군끼리 동일 거동 특성을 나타내고 있다. 이는 간접시험법을 적용했을 때에는 지질학적 생성원인에 따라 상관성해석을 시행해야 신뢰성 높은 결과를 도출할 수 있음을 암시한다.

Keywords

References

  1. 민덕기, 문종규, 이상일(2007), '퇴적암의 공학지수를 추정하기 위한 L.A. 마모율시험', 제23권, 11호, pp.15-26. 한국지반공학회 논문집
  2. 민덕기, 문종규, 노재술(2008), 'Brazilian 시험을 이용한 일축압축강도, 탄성계수의 추정(1)', 한국지반 공학회 논문집, 제24권, 제10호, pp.131-146
  3. 민덕기, 문종규, 노재술(2009), 'Brazilian 시험을 이용한 일축압축강도, 탄성계수의 추정(II)', 한국지반공학회논문집, 제25권 제8호, pp.65-76
  4. 안건상 등(2000), '변성암석학(Raymond L.A. 원저)', 시그마프레스, pp.1-198
  5. 이수곤, 이송(1995), '슈미트 해머 수치를 이용한 한국 화강암의 일축 압축강도 추정방법', 대한토목학회 논문집, 제15권, 제2호, pp.199-210
  6. 이영남, 윤지선, 김두영(1993), 'Rock Test Hammer 측정결과의 활용에 관하여', 한국암반역학회, 터널과 지하공간, Vol.3, pp.167-174
  7. 이영휘, 김용준, 박준규(2000), '압축강도와 풍화도에 관련된 퇴적암의 공학적특성', 한국지반공학회 논문집, 제16권,제1호, pp.5-17
  8. 임성빈, 김교원, 서용석(2005), '대구지역 퇴적암의 일축 압축강도 예측을 위한 인공신경망 적용', The Journal of Engineering Geology, Vol.15, No.1, pp.67-7
  9. 정공수 등(2000), '퇴적암석학', 시그마프레스
  10. 정지곤 등(2000), '화성암석학', 시그마프레스
  11. 정형식, 유병옥(1997), '암석의 풍화에 따른 강도 변화특성 및 강도추정에 관한 연구',한국지반 공학회 논문집, 제13권, 제6호, pp.71-91
  12. 정형식 (2004), '암반역학', 도서출판 새론, pp.1-81
  13. 원종관 등(1989), '지질학 원론', 도서출판 우성, pp.237-594
  14. KS F 2503(1997),'굵은 골재의 비중 및 흡수율 시험방법,' 한국산업규격
  15. Aufmuth, R.E. (1974), 'A systematic determination of engineering criteria for rock', Bull. Ass. Eng. Geol., Vol.6, No.3, pp.235-245 https://doi.org/10.1007/BF02082889
  16. Barton, N., Choubey, V. (1977), 'The shear strength of rock joints in theory and practice', Rock Mech., Vol.10, pp.1-54 https://doi.org/10.1007/BF01261801
  17. Beverly, B. E., Schoenwolf, D.A., Brierly, G.S. (1979), 'Correlations of rock index values with engineering properties and the classification of intact rock
  18. Bieniawski, Z. T. (1975), 'The point-load test in geotechnical practice', Eng. Geol. Vol .9, pp.1-11 https://doi.org/10.1016/0013-7952(75)90024-1
  19. Broch E. and Franklin, J. A. (1972), 'The point-load strength test' Int. J. Rock Mech. Min. Sci. Vol. 9, pp.669-697 https://doi.org/10.1016/0148-9062(72)90030-7
  20. Cargill, A. S and Shakoor, A. (1990), 'Evaluation of empirical methods for measuring the uniaxial compressive strength of rock' Int. J. Rock-Mech. Min. ci. & Geomech. Abstr., Vol. 27, pp.495-530 https://doi.org/10.1016/0148-9062(90)91001-N
  21. D'Andrea, D. V, Fischer, R. L. and Fogelson, D. E (1965), 'Prediction of compressive strength from other rock properties', US Bureau of Mines, Report of Investigation, REPT. 6702, pp.1-23
  22. Deere, D.U., Miller, R.P. (1966), 'Engineering classification and index properties for intact rocks', Tech. Report, Air Force Weapons Lab. New Mexico, No. AFNL-TR. Kirtland., pp.65-116
  23. Forster, I. R (1983), 'The influence of core sample geometry on the axial point load test', Int. J. Rock Mech.. Min. Sci. & Geomech. Abstr., Vol. 20, No.6, pp.291-295 https://doi.org/10.1016/0148-9062(83)90599-5
  24. Greene, S.(1997)Greene, B. H. and Schaffer, A. (1997), 'Laboratory measurement of weak rock strength.' Proc. Symp. Characterization of weak and weathered rock masses. Ass. Eng. Geologists. Special Pub. Vol. 95.9, pp.73-85
  25. Griffith, A. A. (1924), 'Theory of Rupture', Proc. 1st. Int. Congr., Applied Rock Mechanics, Delft, pp.55-63
  26. Gunsallus, K. L. and Kulhawy, F. H. (1984), 'A comparative evaluation of rocks strength measurement' Int. J. Rock Mech. Min. Sci. & Geomech. Abstr, Vol. 21, pp.223-248
  27. Haramy, K.Y., DeMarco, M.J. (1985), 'Use of Schmidt hammer for rock and coal testing', Proc. 26th. U. S. Symp. Rock Mech., pp.549-555
  28. Hiramatsu, Y. and Oka, Y. (1966) 'Determining of the tensile strength of rock by a compression test of an regular test piece', Int. J. Rock Mech. Min. Sci, Vol. 3, pp.89-99 https://doi.org/10.1016/0148-9062(66)90002-7
  29. Hobbs, D. W. (1963), 'A simple method for assessing the uniaxial compressive strength of rock', Int. J. Rock Mech. Min. Sci. Vol. 1, pp.5-15
  30. Kazi, A., Al-Masour, Z. R., (1980-a), 'Empirical relationship between Los Angeles abrasion and Schmidt hammer strength tests with application to aggregate around Jeddah
  31. Katz, O., Reches, Z., Reogiers, J.C.(2000), 'Evaluation of mechanical rock properties using a Schmidt hammer', Int. J. Rock Mech. Min. Sci., Vol.37, pp.723-728 https://doi.org/10.1016/S1365-1609(00)00004-6
  32. Kahraman, S. (2001), 'Evaluation of simple methods for assessing the uniaxial compressive strength of rock', Int. J. Rock Mech. Min. Sci., Vol.38, pp.981-994 https://doi.org/10.1016/S1365-1609(01)00039-9
  33. Kidybinski, A. (1980), 'Method of investigations, estimation and classification of roofs in mines in the United States of America for the selection of suitable mechanized support for long-walls', USDI/CMI Joint Research Project Report. Q. J. Eng. Geol., Vol.13, pp.45-52 https://doi.org/10.1144/GSL.QJEG.1980.013.01.03
  34. Kowalski W.C. (1966),'The independence between the strength and voids ratio of limestone and marls in connection with their water saturating and anisotropy.' Proc. 1st. Congr. Int. Soc. Rock Mech., Lisbon, Portugal. pp.143-144
  35. Pells, P. J. N. (1975), 'The use of the point load test in predicting the compressive strength of rock materials' Australian Geomechanics Journal, Lecture Note, pp.54-56
  36. Protodyakonov, M. M. and Voblikov, V.S. (1957), 'Determining rock strength with specimens of irregular shape', Ugol. 32. Vol. 14. pp.13-17
  37. Rzhevski V. and Novik G. (1971), 'The Physics of Rocks', Moscow, Mir Publishers, pp.320
  38. Schmidt, E. (1951), 'A non-destructive concrete tester', Concrete, Vol.59, No.8, pp.34-35
  39. Shakoor, A., Brown, C. L.,(1996), 'Development of quantitative relationship between unconfined compressive strength and Los Angeles abrasion loss for carbonate rocks', Bull. Int. Ass. Eng. Geol., No.53, pp.97-103
  40. Shorey, P.R., Barat, D., Das, M.N., Mukherjee, K.P., Sing, B. (1984), 'Schmidt hammer rebound data for estimation of large scale in situ coal strength', Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., Vol.21, pp.39-42 https://doi.org/10.1016/0148-9062(84)90008-1
  41. Singh, R.N., Hassani, F.P., Elkington, P.A.S. (1983), 'The application of strength and deformation index testing to the stability assessment of coal measures excavations', Proc. 24th. US Symp. on Rock Mech., Taxas A & M Univ., AEG, pp. 599-609
  42. Smorodinov M.I., Motovilov E.A. and Volkov V.A. (1970), 'Determination of correlation relationships between strength and some physical characteristics of rocks.' Proc. 2nd. Congr. Int. Soc. Rock Mech., Vol.2, Belgrade, pp.35-37
  43. Szlavin J. (1974), 'Relationships between some physical proterties of rock determined by laboratory tests,' Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.11, pp.57-66
  44. Wilson, L. C. (1976), 'Tests of bored and driven piles in cretaceous mudstone at Port Elizabeth Africa,' Geotechnique., Vol. 26, No. 1, pp.5-12 https://doi.org/10.1680/geot.1976.26.1.5
  45. Xu, S., Grasso, P., Mahtab. (1990), 'Use of Schmidt hammer for estimating mechanical properties of weak rock', Proc. 6th. Int. IAEG Cogress, Vol.1, pp.511-519