DOI QR코드

DOI QR Code

점성토 시료추출관이 시료교란에 미치는 영향

Effect of Thin Wall Tube on Clay Soil Disturbance during Sampling

  • 임성훈 (공주대학교 산업과학대학 지역건설공학)
  • 발행 : 2009.09.30

초록

The total recovery ratio test on undisturbed clay soil sampling in the field and the finite element method analysis on modified static state of penetration process were conducted for the purpose of deciding the most important factor among the shape factors of thin wall tube. The adhesion between tube wall and soil did not decrease although internal clearance ratio of tube increased within the little change of tube area ratio. The most part of disturbance occurred in the tip of sampling tube during the penetration. The longitudinal displacement was larger than the lateral displacement because soil was confined laterally after being entered into tube, and also the longitudinal displacement was larger in the upper part of the sample tube than in the lower part.

키워드

참고문헌

  1. ASTM International, 2008. Standard practice for thinwalled tube sampling of soils for geotechnical purposes. ASTM D 1587 - 08
  2. Geo-slope, 2002. Sigma/W version 5 user's guide
  3. Horicuchi, T., A. Eiki, and M. Funahashi, 1987. Evaluation of sample quality by thin-wall sampling tube. in Proc. of the 8th Asian Regional Conf. on Soil Mech. and Found. Eng., 1: 41-44. Kyoto
  4. Horn, H. M., 1979. North american experience in sampling and laboratory dynamic testing. Geotechnical Testing Journal ASTM 2(2) : 84-97 https://doi.org/10.1520/GTJ10434J
  5. Huagn, A. B. and Y. T. Huang, 2007. Undisturbed sampling and laboratory shearing tests on a sand with various fines contents. Soils and Foundations 47(4):771-781 https://doi.org/10.3208/sandf.47.771
  6. Hvorslev, M. J., 1949. Subsurface exploration and sampling of soils for civil engineering purposes. U.S. Army Corps of Engineers. Waterways Experiment Station. Vicksburg. Miss. quoted in Soil sampling. 1996
  7. Kim, Y. C., and J. M. Kang, 2008. Analysis of soil samples obtained from piston sampler and large diameter sampler. Journal of the Korean Geo-Environmental Society 9(3): 29-34 (in Korean)
  8. Korean Standards Association. 2006. Method for thinwalled tube sampling of soils. KS F 2317:2006 (in Korean)
  9. Lee, Y. S., 1996. Finite element analysis for the soil inside the sampling tube penetrating into the ground. Journal of the Korean Society of Civil Engineers 16 (III-1) : 111-119 (in Korean)
  10. Messerklinger, S. and S. M. Springman, 2009. Economic sampling and extraction of undisturbed, high quality samples in normally consolidated lacustrine clays using a large diameter tube. Geotechnical and Geological Engineering Springer 27: 207-215 https://doi.org/10.1007/s10706-008-9223-2
  11. Nagtegaal, J. C., D. M. Parks, and J. R. Rice, 1974. On numerically accurate finite element solutions in the fully plastic range. Computer Methods in Applied Mechanics and Engineering Elsevier 4: 153-177 https://doi.org/10.1016/0045-7825(74)90032-2
  12. NAVFAC, 1982. Soil Mechanics Design Manual 7.1
  13. U.S. Army Corps of Engineers, 1996. Soil sampling, Engineering and Design Manual EM 1110-1-1906. Washington, D.C
  14. Wride, C. E., B. A. Hotmann, and D. C. Sego, 2000. Ground sampling program at the CANLEX test sites. Canadian geotechnical journal 37(3): 530-542 https://doi.org/10.1139/cgj-37-3-530