References
- W. Z. Friend, Corrosion of Nickel and Nickel-Base Alloys, Wiley Interscience, New York, 1980, p. 307
- N. Sridhar, 'Corrosion of Nickel-Base Alloys', Haynes International Conference Proceedings, 2000, p. 643
- G. M. Gordon, 'Corrosion considerations related to permanent disposal of high-level radioactive waste' Corrosion., 58, 811 (2002) https://doi.org/10.5006/1.3287662
- J. J. Gray, J. R. Hayes, G. E. Gdowski, B. E. Viani, and C. A. Orme, 'Influence of Solution pH, Anion Concentration, and Temperature on the Corrosion Properties of Alloy 22' J. Electrochem. Soc., 153, B61 (2006) https://doi.org/10.1149/1.2160433
- N. Priyantha, P. Jayaweera, D. D. Macdonald, and A. Sun, 'An electrochemical impedance study of Alloy 22 in NaCl brine at elevated temperature. I. Corrosion behavior' J. Electroanal. Chem., 572, 409 (2004) https://doi.org/10.1016/j.jelechem.2004.06.031
- A. Nadezhdin and D. Wensley, Mater. Perform., 31, 57 (1992)
- M. Bojinov, G. Fabricius, P. Kinnunen, T. Laitinen, K. Makela, T. Saario, G. Sundholm, and K. Yliniemi, 'Transpassive dissolution of Ni-Cr alloys in sulphate solutionscomparison between a model alloy and two industrial alloys' Electrochim. Acta, 47, 1697 (2002) https://doi.org/10.1016/S0013-4686(02)00018-X
- H. Nanjo, N. J. Laycock, H. Deng, I. Ishikawa, and N. Sanada, 'Atomic-scale flattening of Ni-Cr alloy surfaces by electrochemical passivation treatments' Curr. Appl. Phys., 4, 156 (2004) https://doi.org/10.1016/j.cap.2003.10.020
- Y. Takizawa, K. Sugahara, 'Corrosion-resistant Ni-Cr-Mo alloys in hot concentrated sulphuric acid with active carbon' Mater. Sci. Eng. A, 198, 145 (1995) https://doi.org/10.1016/0921-5093(95)80069-7
- M. Bojinov, G. Fabricius, P. Kinunnen, T. Laitinen, K. Makela, T. Saario, and G. Sundholm, 'The mechanism of transpassive dissolution of Ni-Cr alloys in sulphate solutions' Electrochim. Acta, 45, 2791 (2000) https://doi.org/10.1016/S0013-4686(00)00387-X
-
L. J. Oblonsky and M. P. Ryan, 'In Situ X-Ray Absorption Near-Edge Structure Study of the Active and Transpassive Dissolution of Passive Films on Ni and Ni-Cr Alloys in 0.1 M
$H_{2}SO_{4}$ ' J. Electrochem. Soc., 148, B405 (2001) https://doi.org/10.1149/1.1398276 -
A. C. Lloyd, J. J. No
$\ddot{e}$ l, S. McIntyre, and D. W. Shoesmith, 'Cr, Mo and W alloying additions in Ni and their effect on passivity' Electrochim. Acta, 49, 3015 (2004) https://doi.org/10.1016/j.electacta.2004.01.061 - R. S. Lillard, M. P. Jurinski, and J. R. Scully, 'Crevice corrosion of alloy 625 in chlorinated ASTM artificial ocean water' Corrosion, 50, 251 (1994) https://doi.org/10.5006/1.3294331
- M. Bojinov and T. Tzvetkoff, 'The Influence of Solution Anion on the Mechanism of Transpassive Dissolution of Ferrous- and Nickel-Based Alloys' J. Phys. Chem. B, 107, 5101 (2003) https://doi.org/10.1021/jp0340616
- C. R. Clayton and I. Olefjord, in: P. Marcus ad J. Oudar (Ed.), Corrosion Mechanisms in Theory and Practice, Marcel Dekker, Inc. New York, 1995, Ch. 6
- A. J. Sedriks, Corrosion of Stainless Steels, Wiley, New York, 1979
- A. C. Lloyd, D. W. Shoesmith, N. S. McIntyre, and J. J. Noel, 'Effects of Temperature and Potential on the Passive Corrosion Properties of Alloys C22 and C276' J. Electrochem. Soc., 150, B120 (2003) https://doi.org/10.1149/1.1554914
- H. Huang, 'Effect of chemical composition on the corrosion behavior of Ni-Cr-Mo dental casting alloys' J. Biomed. Mater. Res., 60, 458 (2002) https://doi.org/10.1002/jbm.10080
- N. E. Hakiki, S. Boudin, B. Rondot, and M. Da Cunha Belo, 'The electronic structure of passive films formed on stainless steels' Corros. Sci., 37, 1809 (1995) https://doi.org/10.1016/0010-938X(95)00084-W
- H. Tsuchiya, S. Fujimoto, O. Chihara, and T. Shibata, 'Semiconductive behavior of passive films formed on pure Cr and Fe-Cr alloys in sulfuric acid solution' Electrochim. Acta, 47, 4357 (2002) https://doi.org/10.1016/S0013-4686(02)00508-X
- K. S. Raja, S. A. Namjoshi, and M. Misra, 'Improved corrosion resistance of Ni-22Cr-13Mo-4W Alloy by surface nanocrystallization' Mater. Lett., 59, 570 (2005) https://doi.org/10.1016/j.matlet.2004.10.047
- D. D. Macdonald, A. Sun, N. Priyantha, and P. Jayaweera, 'An electrochemical impedance study of Alloy-22 in NaCl brine at elevated temperature: II. Reaction mechanism analysis' J. Electroanal. Chem., 572, 421 (2004) https://doi.org/10.1016/j.jelechem.2004.05.032
- D. D. Macdonald, 'Passivity-the key to our metals-based civilization' Pure Appl. Chem., 71, 951 (1999) https://doi.org/10.1351/pac199971060951
- C. R. Clayton and Y. C. Lu, 'A Bipolar Model of the Passivity of Stainless Steel: The Role of Mo Addition' J. Electrochem. Soc., 133, 2465 (1986) https://doi.org/10.1149/1.2108451
- M. Sakashita and N. Sato, 'The effect of molybdate anion on the ion-selectivity of hydrous ferric oxide films in chloride solutions' Corros. Sci., 17, 473 (1977) https://doi.org/10.1016/0010-938X(77)90003-8
- K. Hashimoto, K. Asami, and K. Teramoto, 'An X-ray photo-electron spectroscopic study on the role of molybdenum in increasing the corrosion resistance of ferritic stainless steels in HC1' Corros. Sci., 19, 3 (1970) https://doi.org/10.1016/0010-938X(79)90003-9
- H. Ogawa, H. Omata, I. Itoh, and H. Okada, 'Auger electron spectroscopic and electrochemical analysis of the effect of alloying elements on the passivation behavior of stainless steels' Corrosion, 34, 53 (1978)
- M. Urquidi and D. D. Macdonald, 'Solute-Vacancy Interaction Model and the Effect of Minor Alloying Elements on the Initiation of Pitting Corrosion' J. Electrochem. Soc., 132, 555 (1985) https://doi.org/10.1149/1.2113886
Cited by
- Passivity of Spring Steels with Compressive Residual Stress vol.8, pp.10, 2018, https://doi.org/10.3390/met8100788