초록
PDLC 필름을 제작하는 데는 여러 방법들이 있으나 그중 하나로서 에멀젼 기술에 기반을 둔 NCAP필름 제조방법이 있다. 이러한 에멀젼 기술은 물에 부분적으로 용해될 수 있는 PVA, PVP와 같은 고분자로 NCAP를 제조할 수 있고, 또한 안정제 없이도 안정한 액정 에멀젼을 형성할 수 있다. 본 연구에서는 물에 녹는 것과 물에 녹지 않는 부분을 가지고 있는 분자로 구성된 공중합체에 대하여 에멀젼의 안정성과 계면장력, 표면장력이 공중합체의 구성, 농도, 소수성 체인 등에 의존한다는 것도 연구하였다. Acrylamide-styrene(AA-ST)계 공중합체는 같은 농도조건에서 사용한 다른 공중합체보다 낮은 계면장력을 나타낸다. 낮은 계면장력 때문에 AA-ST 공중합체는 액정분자들과 좋은 친화성을 갖는다. 또한 액정표면에 쉽게 흡수되는 분자들이 액정 에멀젼 시스템을 더 안정화하다는 것과 형태학적 분석을 통한 액정의 안정성도 논의하였다.
There are several methods to fabricate Polymer Dispersed Liquid Crystal(PDLC) films. One of them, so-called Nematic Curvilinear Aligned Phase(NCAP) film, is based on emulsion technology. To produce NCAP systems various water soluble polymers, such as partially hydrolyzed polyvinylalcohol(PVA) and polyvinyl pyrrolidone(PVP), which can form stable emulsion of liquid crystal(LC) without any stabilizers were used. In this work, we studied the dependence of emulsion stability on nature and composition of copolymers composed of water-soluble and water-insoluble moiety. We found that interfacial surface tension depends on the composition of comonomer, the copolymer concentration in the water, and the nature of hydrophobic chain. The Acrylamide -styrene(AA-ST) copolymer showed the lowest interfacial surface tension among the tested copolymers at the same concentration. Since the interfacial surface tension decreases with increasing the compatibility of copolymer with LC phase the AA-ST copolymer has the best compatibility with LC molecules. It is believed that molecules adsorbing easily on the surface of LC droplets allows the LC emulsion system to be more stable.