Journal of Welding and Joining

  • 제27권4호
  • /
  • Pages.44-48
  • /
  • 2009
  • /
  • 2466-2232(pISSN)
  • /
  • 2466-2100(eISSN)
대한용접접합학회 (The Korean Welding and Joining Society)
권호 표지
DOI QR코드

DOI QR Code

팁 선단에 중공이 있는 전극을 이용한 스패터 저감 스폿 용접에 관한 연구

A Study of Spot Welding Process to Reduce Spatter with the Hollow Tip

  • Jun, Jung-Sang (Dept. of Mechatronics System Engineering, Hanyang University) ;
  • Rhee, Se-Hun (School of Mechanical Engineering, Hanyang University)
  • 발행 : 2009.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In automotive company, a lot of researchers have investigated for the spatterless welding process during last two decades. A spatter influences on the product quality such as strength and surface states. In this paper, a hollow tip is proposed for spatterless process. An optimal size of electrode hole is obtained from a weldability evaluation of each hole diameter. Through the cross section analysis, a phenomenon that molten metal moves in the hole which located between two workpiece is observed, and this makes spatterless welding process even though current is higher. Finally, widely acceptable weld area in lobe curve is obtained by using hollow tip as compare with conventional no hollow tip. In this paper, spatterless resistance spot welding with improvement weldability and productivity is proposed by using hollow tip.

키워드

참고문헌

  1. I. W. Johnson : Spot Welding of Carbon Steel, Welding Research Supplement, Mar. (1960), 89-96
  2. D. W Seo. H. C Yoon. Y. B Jeon. J. K Lim : Effect of Spot Welding Conditions on Spatter and Mechanical Strength Properties, Journal of KWS. 21-2 (2003), 200-205 (in Korean)
  3. S. M Cho : Principle of Resistance Welding and Analysis of Monitoring Results, Journal of KWS. 15-2 (1997), 1-10 (in Korean)
  4. K. Rhyu and C. S. Kang : A Study on the Weldability of Galvannealed Steel in Spot Welding Process, Journal of KWS, 5-1 (1987), 64-72 (in Korean)
  5. S. A Gedeon, D. Schrock, J. Lapointe, and T. W. Eagar : Metallurgical and process Variables Affecting the Resistance Spot Weldability of Galvanized Sheet Steels, SAE Technical Paper 840113 (1984)
  6. S. A Gedeon and T. W. Eager : Resistance Spot Welding of Galvanized Steel: Part Ⅰ. Material Variations and Process Modifications, Metallurgical Transactions B, 17B (1986), 879-885
  7. J. K. Min, Y. K Oh and G. S. Kim : A Study on the Spot Weldability of Automotive Steel Sheets, Journal of KWS, 14-3 (1996), 41-47 (in Korean)
  8. H. Park, T. Kim and S. Rhee : Optimization of Welding Parameters for Resistance Spot Welding of TRIP Steel using Response Surface Methodology, Journal of KWS, 21-2 (2003), 76-81 (in Korean)
  9. E. W. Kim and T. W. Eager : Parametric Analysis of Resistance Spot Welding Love Curve, SAE Technical Paper 880278 (1988)
  10. M. Calva and W. Eager : Enhancement of the Weldability in Resistance Spot Welding, Sheet Metal Welding Conference Ⅳ, Southfield. Mich, 1990)
  11. KS B 0851, Spot weld specimen for tensile shear test, Korean Standard Association, (1980)
  12. Hyundai Motor Company Standard Specification SPECS NO: MS 111-01A
  13. J. S. Jun. H. S. Park and S. Rhee : A Study on the Spatterless Resistance Spot Welding with Hollow Cap Tip, KWJS (2008)-spring, 24