참고문헌
- H. S. Kim, Doctoral Thesis, Korea Advanced Institute of Science andTechnology, 2005.
- S. Y. Lee, J.-G. Hyun, H. S. Kim, and K.-W. Paik, IEEE Trans. Adv. Package. 30, 428 (2007). https://doi.org/10.1109/TADVP.2007.898614
- J. Xu, K.-S. Moon, P. Pramanik, S. Bhattacharya, and C. P. Wong, IEEE Trans. Adv. Package. 30, 248 (2007).
- R. N. Das, Frank D. Egitto, Jhon M. Lauffer, and Voya R. Markovich, IEEE Trans. Elec. Package. Man. 31, 97 (2008). https://doi.org/10.1109/TEPM.2008.919337
- Y. Rao, S. Ogitani, P. Kohl, and C. P. Wong, J. Appl. Poly. Sci., 83, 1084 (2002). https://doi.org/10.1002/app.10082
- K.-C. Ahn, H.-W. Kim, J.-K. Ahn, and S.-G. Yoon, J. of KIEEME(in Korean) 20, 342 (2007).
- J. Robertson and B. R. Varlow, IEEE Trans. Dielectr. Electr. Insul. 12, 779 (2005). https://doi.org/10.1109/TDEI.2005.1511103
- S.-D. Cho, J.-Y. Lee, and K.-W. Paik, J. Microelectron. Packing Soc. 9, 11 (2003).
- S. P. Mitoff, General Electric research and Development Center, Schenectady, New York. 2003
피인용 문헌
- A Low Operating Electric Field Blue-Phase Liquid Crystal Display With Wedge Protrusion vol.10, pp.9, 2014, https://doi.org/10.1109/JDT.2014.2321183
- Few-layer-graphene/polycarbonate nanocomposites as dielectric and conducting material vol.132, pp.34, 2015, https://doi.org/10.1002/app.42443
- High-Permittivity Composites Thin Films for High-Energy Storage Capacitor Application Using the Nonvacuum Method vol.36, pp.3, 2017, https://doi.org/10.1002/adv.21619
- Physical aspects of 0-3 dielectric composites vol.05, pp.02, 2015, https://doi.org/10.1142/S2010135X15500125
- Dielectric and thermal properties of CCTO/epoxy composites for embedded capacitor applications: mixing and fabrication methods vol.26, pp.10, 2015, https://doi.org/10.1007/s10854-015-3471-8
- Numerical simulation and experiments on mono-polar negative corona discharge applied in nanocomposites vol.24, pp.2, 2017, https://doi.org/10.1109/TDEI.2017.006174
- Design and Analysis of Electrical Properties of a Multilayer Ceramic Capacitor Module for DC-Link of Hybrid Electric Vehicles vol.8, pp.4, 2013, https://doi.org/10.5370/JEET.2013.8.4.808
- Improvement of the dielectric properties of BaTiO3 powder-polymer composite using molten salt treatment vol.19, pp.5, 2012, https://doi.org/10.1109/TDEI.2012.6311532
- Thermal, mechanical and electrical properties of polyanaline based ceramic nano-composites vol.146, 2016, https://doi.org/10.1088/1757-899X/146/1/012011
- DEVELOPMENT OF POLYMER-BASED 0–3 COMPOSITES WITH HIGH DIELECTRIC CONSTANT vol.01, pp.04, 2011, https://doi.org/10.1142/S2010135X11000574
- Thermal and dielectric behavior of flexible polycarbonate/lead zirconate titanate composite system vol.131, pp.4, 2014, https://doi.org/10.1002/app.39913
- Electrical Properties of Single-Walled/Multi-Walled Carbon-Nanotubes Filled Polycarbonate Nanocomposites vol.46, pp.1, 2017, https://doi.org/10.1007/s11664-016-4907-5
- Effect of Zn filler for percolative BaTiO3/Zn composite films fabricated by aerosol deposition vol.41, pp.9, 2015, https://doi.org/10.1016/j.ceramint.2015.06.034
- Electrical and dielectric properties of poly(1,3,4-oxdiazole) nanocomposite films with graphene sheets dispersed in layers vol.16, pp.9, 2015, https://doi.org/10.1007/s12221-015-5479-3
- Influence of silane coupling agent on microstructure and properties of CCTO-P(VDF-CTFE) composites vol.08, pp.02, 2018, https://doi.org/10.1142/S2010135X1850008X
- Influence of Al2O3 particle size on properties of thermoplastic starch–TiO2–Al2O3 composites pp.1436-2449, 2019, https://doi.org/10.1007/s00289-019-02688-0