SPS 소결에 의한 $SiC-ZrB_2$ 도전성 세라믹 복합체 특성

Properties of $SiC-ZrB_2$ Electroconductive Ceramic Composites by Spark Plasma Sintering

  • 주진영 (원광대 전기.정보통신공학부) ;
  • 이희승 (군장대 전기전자과) ;
  • 조성만 (전기안전공사) ;
  • 이정훈 (원광대 대학원 전기공학과) ;
  • 김철호 (원광대 대학원 전기공학과) ;
  • 박진형 (원광대 대학원 전기공학과) ;
  • 신용덕 (원광대학교 전기.정보통신공학부)
  • 발행 : 2009.09.01

초록

The composites were fabricated by adding 0, 15, 20, 25[vol.%] Zirconium Diboride(hereafter, $ZrB_2$) powders as a second phase to Silicon Carbide(hereafter, SiC) matrix. The physical, mechanical and electrical properties of electroconductive SiC ceramic composites by Spark Plasma Sintering(hereafter, SPS) were examined. Reactions between ${\beta}-SiC$ and $ZrB_2$ were not observed in the XRD analysis. The relative density of mono SiC, SiC+15[vol.%]$ZrB_2$, SiC+20[vol.%]$ZrB_2$ and SiC+25[vol.%]$ZrB_2$ composites are 90.93[%], 74.62[%], 74.99[%] and 72.61[%], respectively. The XRD phase analysis of the electroconductive SiC ceramic composites reveals high of SiC and $ZrB_2$ and low of $ZrO_2$ phase. The lowest flexural strength, 108.79[MPa], shown in SiC+15[vol.%] $ZrB_2$ composite and the highest - 220.15[MPa] - in SiC+20[vol.%] $ZrB_2$composite at room temperature. The trend of the mechanical properties of the electroconductive SiC ceramic composites moves in accord with that of the relative density. The electrical resistivities of mono SiC, SiC+15[vol.%]$ZrB_2$, SiC+20[vol.%]$ZrB_2$ and SiC+25[vol.%]$ZrB_2$ composites are 4.57${\times}10^{-1}$, 2.13${\times}10^{-1}$, 1.53${\times}10^{-1}$ and 6.37${\times}10^{-2}$[${\Omega}$ cm] at room temperature, respectively. The electrical resistivity of mono SiC, SiC+15[vol.%]$ZrB_2$. SiC+20[vol.%]$ZrB_2$ and SiC+25[vol.%]$ZrB_2$ are Negative Temperature Coefficient Resistance(hereafter, NTCR) in temperature ranges from 25[$^{\circ}C$] to 100[$^{\circ}C$]. The declination of V-I characteristics of SiC+20[vol.%]$ZrB_2$ composite is 3.72${\times}10^{-1}$. It is convinced that SiC+20[vol.%]$ZrB_2$ composite by SPS can be applied for heater or electrode above 1000[$^{\circ}C$]

키워드

참고문헌

  1. Patricia A. Hoffman, 'Thermo Elastic Properties of Silcon Carbide-Titanium Diboride Particulate Composites' M. S Thesis, Pennslyvania State University, 1992
  2. Hideto Hashiguchi and Hisashi Kimugasa 'Electrical Resistivity of $\alpha$-SiC Ceramics Added with NiO' J. Ceram. Soc. Japan, 102[2], pp. 160-'64, 1994 https://doi.org/10.2109/jcersj.102.160
  3. M. Nakamura, I Shigematsu, K. Kanayama and Y. Hirai 'Surface Damage in ZrB2-based Composite Ceramics Induced by Electro-Discharge Machining' J. Mater. Sci., 26, pp. 6078-6082, 1991 https://doi.org/10.1007/BF01113887
  4. Y. D. Shin and J. Y. Ju, 'Effect of In Situ YAG on Microstructure and Properties of the Pressureless-Sintered SiC-ZrB2 Electroconductive Ceramic Composites' Trans. KIEE, Vol. 55C, No. 11, pp. 505-513, 2006
  5. Y. D. Shin and J. Y. Ju, 'Effect of Annealing Temperature on Microstructure and Properties of the Pressureless-Sintered SiC-ZrB2 Electroconductive Ceramic Composites' Trans. KIEE, Vol. 55C, No. 9, pp. 434-441, 2006
  6. Y. D. Shin, J. Y. Ju and T. H. Ko, 'Effects of Boride on Microstructure and Properties of the Electroconductive Ceramic Composites of Liquid-Sintered Silicon Carbide System' Trans. KIEE, Vol. 56C, No. 9, pp. 1602-1608, 2007
  7. Yong-Deok Shin and Jing-Young Ju, 'Properties and Manufacture of the f3-SiC-ZrB2 Composites Densified by Liquid-Phase Sintering' Trans. KIEE. Vol. 48C, No2 pp.93-97, 1998
  8. K. A. Khor, L. G. Yu, & S. H. Chan and X. J. Chen, 'Densification of plasma sprayed YSZ electrolytes by spark plasma sintering(SPS)' Journal of the European Ceramic Society, 23 1855-1863, 2003 https://doi.org/10.1016/S0955-2219(02)00421-1
  9. Xiaoyan Song,w Xuemei Liu, and Jiuxing Zhang , 'Neck Formation and Self-Adjusting Mechanism of Neck Growth of Conducting Powders in Spark Plasma Sintering'. J. Am. Ceram. Soc., 89 [2] 494-500 2006 https://doi.org/10.1111/j.1551-2916.2005.00777.x
  10. Shu-Qi Guo,w,z Toshiyuki Nishimura,y Yutaka Kagawa,,z,z and Jenn-Ming YangJ, 'Spark Plasma Sintering of Zirconium Diborides' J. Am. Ceram. Soc., 91 [9] 2848 - 2855 2008 https://doi.org/10.1111/j.1551-2916.2008.02587.x
  11. Zhijian Shen, Mats Johnsson, Zhe Zhao, and Mats Nygren, 'Spark Plasma Sintering of Alumina' J. Am. Ceram. Soc., 85 [8] 1921 - 27 2002 https://doi.org/10.1111/j.1151-2916.2002.tb00381.x
  12. Alireza Rezaie, William G. Fahrenholtz and Gregory E. Hilmas, 'Oxidation of Zirconium Diboride-Silicon Carbide at 1500${^{\circ}C}$ at a Low Partial Pressure of Oxygen' J. Am. Ceram. Soc., 89[10], pp. 3240-3245, 2006 https://doi.org/10.1111/j.1551-2916.2006.01229.x
  13. F. Monteverde and A. Bellosi 'Oxidation of ZrB2-Based Ceramics in Dry Air' Journal of The Electrochemical Society., 150[11], B552-B559, 2003 https://doi.org/10.1149/1.1618226
  14. Diletta. Sciti, Cesare. Melandri and Alida Bellosi, 'Propertise of ZrB2-Reinforced Tenary Composites', Adanced Engineering Materials, 6[9], pp. 775-781, 2004 https://doi.org/10.1002/adem.200400039
  15. Cathleen Mroz, 'Zirconium Diboride' J. Am. Ceram. Soc., Bull., 74[6], pp.164-165, 1995
  16. F. Monteverde, A. Bellosi and S. Guicciardi, 'Processing and Properties of Zirconium Diboride-based Composites', Journal of the European Ceramic Society, 22. pp.279-288, 2002 https://doi.org/10.1016/S0955-2219(01)00284-9
  17. J. B. Hurst and S. Dutta, 'Simple Processing Method for High-strength Silicon Carbide', J. Am. Ceram. Soc., 70[11]. pp. C303-308, 1987 https://doi.org/10.1111/j.1151-2916.1987.tb05642.x
  18. M. Nader, F. Aldinger and M. J. Hoffmann, 'Influence of the ${\alpha}/{\beta}$ Phase Transformation on Microstructural Development and Mechanical Properties of Liquid Phase Sintered Silicon Carbide', J. Mat. Sci., 34. pp. 1197-1204, 1999 https://doi.org/10.1023/A:1004552704872
  19. Y. W. Kim, M. Mitomo, H. Emoto, J. G. Lee, 'Effect of Initial a-Phase Content on Microstructure and Mechanical Properties of Sintered Silicon Carbidea', J. Am. Ceram. Soc., 81[12], pp.3136-3140, 1998 https://doi.org/10.1111/j.1151-2916.1998.tb02748.x
  20. Y. W. Kim, M. Mitomo and H. Hirotsuru, 'Microstructure Development of Silicon Carbide Containing Large Seed Grains', J. Am. Ceram. Soc., 80[1], pp. 99-105, 1997 https://doi.org/10.1111/j.1151-2916.1997.tb02796.x
  21. Weimin Wang, Zhengyi Fu, Hao Wang and Runzhang Yuan, 'Influence of Hot Pressing Sintering Temperature and Time on Microstructure and Mechanical Properties of TiB2 Ceramics', Journal of the European Ceramic Society, 22. pp. 1045-1049, 2002 https://doi.org/10.1016/S0955-2219(01)00424-1
  22. Akira Kondo, 'Electrical Conduction Mechanism in Recrystallized SiC', Journal of the Ceramic Society of Japan. lnt. Edition, Vol. 100, pp.1204-1208, 1993