Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Magnetic Saliency Estimation of SMPM Motor for Precise Torque Control using State-Filter in Flux-Weakening Operation

정밀 토크 제어를 위한 SMPM 전동기의 약자속 영역에서 자기 돌극성 추정

  • 장주영 (영남대학교 전기공학과) ;
  • 최찬희 (영남대학교 전기공학과) ;
  • 석줄기 (영남대학교 전기공학과)
  • Published : 2009.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

The magnetic saliency effect in surface-mounted permanent-magnet (SMPM) motors on the torque control at high speeds is first presented and analyzed in this paper. The d- and q- axes impedance are measured by proposed State-Filter. Measurement of the d- and q- axes impedance difference is performed to prove the existence of the magnetic saliency. Then, the saliency effects on the torque control performance in the flux weakening region are discussed. Based on the developed motor modeling with the reluctance torque, the proposed control adjusts the d- and q-axis current toward the operating point to track the commanded torque. The feasibility of the presented idea is verified by experimental results on a commercial 600[W] SMPM motor.

본 논문에서는 고속에서 토크 제어 시 표면 부착형 전동기에 발생되는 자기 포화 현상으로 인한 돌극 현상을 분석하고 해석한다. 인덕턴스 추정을 위한 State-Filter를 고안하여 d축과 q축의 임피던스를 추정하며 추정된 d축과 q축의 임피던스 차이로 자기 포화로 인한 돌극성이 존재한다는 것을 증명한다. 또한, 약자속 영역에서 토크 제어를 수행함에 있어서 돌극성 효과를 고려한 전류제어 방법을 제안한다. 릴럭턴스 토크를 가지는 전동기 모델을 기반으로 하여 제안된 제어기는 전류 제한원에서 토크 곡선을 따라 d축과 q축의 전류를 조절한다. 제안된 전류제어의 타당성을 증명하기 위해 600[W] 상용 SMPM 전동기를 대상으로 실험을 수행하였다.

Keywords

References

  1. A. M. EL-Refaie and T. M. Jahns, "Optimal flux weakening in surface PM machines using fractional-slot concentrated windings", IEEE Trans.Ind. Appl., vol. 41, pp. 790-800, May/June 2005 https://doi.org/10.1109/TIA.2005.847312
  2. Y. S. Kim and S. K. Sul, "Torque control strategy of an IPMSM considering the flux variation of the permanent magnet", in Proc. IEEE IAS Annu. Meeting, 2007, pp. 1301-1307 https://doi.org/10.1109/07IAS.2007.202
  3. J. H. Jang, S. K. Sul, J. I. Ha, K. Ide, and M. Sawamura, "Sensorless drive of surface-mounted permanent-magnet motor by high-frequency signal injection based on magnetic saliency", IEEE Trans. Ind. Appl., vol. 39, No. 4,pp. 1031-1039, July/Aug. 2003 https://doi.org/10.1109/TIA.2003.813734
  4. R. Raute, C. Caruana, J. Cilia, C. S. Staines, and M. Sumner, "A zero speed operation sensorless PMSM drive without additional test signal injection" in Proc. EPE 2007, 10 p
  5. C. H. Choi and J. K. Seok, "Compensation of zero current clamping effects in high-frequency signal injection based sensorless PM motor drives", IEEE Trans.Ind. Appl., vol. 43, pp. 1258-1265, Sep./Oct. 2007 https://doi.org/10.1109/TIA.2007.904409
  6. M. Eskola, M. Jussila, and H. Tuusa, "Indirect matrix converter fed PMSM-sensorless control using carrier injection", in Proc. IEEE PESC, 2004, pp. 4010–-4016 https://doi.org/10.1109/PESC.2004.1355185
  7. S. D. Sudhoff and H. J. Hengner, "A flux-weakening strategy for current regulated surface-mounted permanent magnet machine drives", IEEE Trans. Energy Convers., vol. 10, no. 3, pp. 431–-437, Sep. 1995 https://doi.org/10.1109/60.464865
  8. J. H. Song, J. M. Kim, and S. K. Sul, "A new Robust SPMSM control to parameter variations in flux weakening region", in Proc. IEEE IECON, 1996, pp.1193-1198
  9. T. M. Jahns, G. B. Kliman, and T. W. Neumann, "Interior permanentmagnet synchronous motors for adjustablespeed drives", IEEE Trans. Ind. Appl., vol. 22, pp. 738-747, Jul./Aug. 1986 https://doi.org/10.1109/TIA.1986.4504786
  10. Y. S. Jeong and S. K. Sul, "Adaptive flux observer with on-line inductance estimation of an interior permanentmagnet synchronous machine considering magnetic saturation", in Proc. IEEE PESC, 2005, pp. 2467-2473 https://doi.org/10.1109/PESC.2005.1581979
  11. H. B. Kim, M. C. Harke, R. D. Lorenz "Sensorless Control of Interior Permanent-Magnet Machine Drives With Zero-Phase Lag Position Estimation". IEEE Trans.Ind. Appl., vol. 39, No.6, pp. 1726-1733, Nov./Dec. 2003 https://doi.org/10.1109/TIA.2003.818966