DOI QR코드

DOI QR Code

섬유 보강 복합레진의 섬유 방향이 중합수축에 미치는 영향

EFFECT OF FIBER DIRECTION ON THE POLYMERIZATION SHRINKAGE OF FIBER-REINFORCED COMPOSITES

  • 염중원 (치과보존학교실, 서울대학교 치의학대학원) ;
  • 이인복 (치과보존학교실, 서울대학교 치의학대학원)
  • Yom, Joong-Won (Department of Conservative Dentistry, School of Dentistry, Seoul National University) ;
  • Lee, In-Bog (Department of Conservative Dentistry, School of Dentistry, Seoul National University)
  • 발행 : 2009.07.31

초록

본 연구의 목적은 strain gage와 LVDT (linear variable differential transformer) 변위센서를 이용하여 섬유 보강 복합레진에서 섬유의 방향이 복합레진의 중합수축에 미치는 영향을 알아보기 위함이다. 지름 10 mm, 높이 2 mm의 원반 모양 유동성 복합레진 (Aeliteflo A2, Bisco, Inc., IL, USA) 중앙에 유리섬유 (X-80821P Glass Fiber, Bisco, Inc., IL, USA)를 위치시키고, 섬유가 배열된 장축 방향 (longitudinal)과 수직방향 (transversal)의 중합수축량을 strain gage (Linear S-series 350${\Omega}$, CAS, Seoul, Korea)를 이용하여 각각 측정하였다. 사용된 유동성 복합레진 자체의 free 중합수축을 구하기 위해 지름 7 mm, 높이 1 mm의 원반 모양 시편의 수직 방향 (axial) free 중합수축값을 LVDT로 측정하였다. 중합된 시편들을 절단하여 주사전자현미경으로 복합 레진 내부의 섬유배열을 관찰하고 각 군에서 측정된 평균 수축값들을 ANOVA로 비교하였고 Scheffe post-hoc test로 사후 검정하였다 (${\alpha}$=0.05). 섬유가 배열된 평면 상에서 복합레진의 중합수축 (radial shrinkage)은 섬유와 평행한 방향에서 감소하고 섬유와 수직한 방향에서 증가했다 (p<0.05). 본 연구의 결과 섬유 보강 복합레진으로 스플린트나 수복물을 제작할 때 중합수축량은 보강된 섬유의 배열방향에 따라 큰 차이가 남을 알 수 있었다.

The aim of this study was to evaluate the effect of fiber direction on the polymerization shrinkage of fiber-reinforced composite. The disc-shaped flowable composite specimens (d = 10 mm, h = 2 mm, Aeliteflo A2, Bisco, Inc., IL, USA) with or without glass fiber bundle (X-80821P Glass Fiber, Bisco, Inc., IL, USA) inside were prepared, and the longitudinal and transversal polymerization shrinkage of the specimens on radial plane were measured with strain gages (Linear S-series 350${\Omega}$, CAS, Seoul, Korea). In order to measure the free polymerization shrinkage of the flowable composite itself, the disc-shaped specimens (d = 7 mm, h = 1 mm) without fiber were prepared, and the axial shrinkage was measured with an LVDT (linear variable differential transformer) displacement sensor. The cross-section of the polymerized specimens was observed with a scanning electron microscope to examine the arrangement of the fiber bundle in composite. The mean polymerization shrinkage value of each specimen group was analyzed with ANOVA and Scheffe post-hoc test (${\alpha}$=0.05). The radial polymerization shrinkage of fiber-reinforced composite was decreased in the longitudinal direction of fiber, but increased in the transversal direction of fiber (p<0.05). We can conclude that the polymerization shrinkage of fiber-reinforced composite splint or restoratives is dependent on the direction of fiber.

키워드

참고문헌

  1. Giachetti L, Scaminaci Russo D, Bambi C, Grandini R. A review of polymerization shrinkage stress: current techniques for posterior direct resin restorations. J Contemp Dent Pract 7:79-88, 2006
  2. Vallittu PK, Lassila VP, Lappalainen R. Acrylic resinfiber composite-Part I: The effect of fiber concentration on fracture resistance. J Prosthet Dent 71:607-612, 1994 https://doi.org/10.1016/0022-3913(94)90446-4
  3. Vallittu PK. Acrylic resin-fiber composite--Part II: The effect of polymerization shrinkage of polymethyl methacrylate applied to fiber roving on transverse strength. J Prosthet Dent 71:613-617, 1994 https://doi.org/10.1016/0022-3913(94)90447-2
  4. Goldberg AJ, Burstone CJ. The use of continuous fiber reinforcement in dentistry. Dent Mater 8:197-202, 1992 https://doi.org/10.1016/0109-5641(92)90083-O
  5. Butterworth C, Ellakwa AE, Shortall A. Fibre-reinforced composites in restorative dentistry. Dent Update 30:300-306, 2003 https://doi.org/10.12968/denu.2003.30.6.300
  6. Dyer SR, Lassila LV, Jokinen M, Vallittu PK. Effect of cross-sectional design on the modulus of elasticity and toughness of fiber-reinforced composite materials. J Prosthet Dent 94:219-226, 2005 https://doi.org/10.1016/j.prosdent.2005.06.008
  7. Tezvergil A, Lassila LV, Vallittu PK. The effect of fiber orientation on the polymerization shrinkage strain of fiberreinforced composites. Dent Mater 22:610-616, 2006 https://doi.org/10.1016/j.dental.2005.05.017
  8. Sakaguchi RL, Versluis A, Douglas WH. Analysis of strain gage method for measurement of post-gel shrinkage in resin composites. Dent Mater 13:233-239, 1997 https://doi.org/10.1016/S0109-5641(97)80034-6
  9. Versluis A, Tantbirojn D, Douglas WH. Distribution of transient properties during polymerization of a lightinitiated restorative composite. Dent Mater 20:543-553, 2004 https://doi.org/10.1016/j.dental.2003.05.006
  10. Lassila LV, Vallittu PK. The effect of fiber position and polymerization condition on the flexural properties of fiber-reinforced composite. J Contemp Dent Pract 5:14-26, 2004
  11. Lee IB, Cho BH, Son HH, Um CM, Lim BS. The effect of consistency, specimen geometry and adhesion on the axial polymerization shrinkage measurement of light cured composites. Dent Mater 22:1071-1079, 2006 https://doi.org/10.1016/j.dental.2005.08.012
  12. Sakaguchi RL, Wiltbank BD, Shah NC. Critical configuration analysis of four methods for measuring polymerization shrinkage strain of composites. Dent Mater 20:388-396, 2004 https://doi.org/10.1016/j.dental.2003.11.002