Abstract
This paper was investigated the research regarding the effects of several factors such as initial ammonium nitrogen concentration, aeration rate. biomass amount and C/N ratio on nitrification process using synthetic wastewater and activated sludge obtained from wastewater treatment facility. As a result, in high ammonium nitrogen concentration above 100 mg/L, the pH of wastewater was dropped to pH 6.8. The increases of initial ammonium nitrogen concentration, aeration rate and initial biomass amount were linearly enhanced the removal rate of ammonium nitrogen. In the condition of C/N ratio of 0 to 3, high ammonium nitrogen removal rate was obtained.
질산화 미생물은 환경조건에 대단히 민감하여 질산화 영향인자의 변화에 의하여 미생물의 성장과 활동이 좌우되고, 이에 의해 질산화 공정의 성공여부가 좌우된다. 질산화에 영향을 미치는 인자로는 배양온도, pH, 용존산소, 기질량, C/N비, 미생물량 등이 있다. 본 연구에서는 폐수처리장의 활성슬러지를 이용하여 합성폐수의 질산화 공정에 미치는 인자들에 대한 연구를 수행하여 다음과 같은 결론을 얻었다. 고농도의 암모니아성 질소(100 mg/L 이상)를 함유한 경우에 있어서는 합성폐수의 pH가 초기 8에서 pH 6.8까지 감소하였다. 이는 질산화 과정을 통하여 아질산성 질소와 질산성 질소가 생성되어 합성폐수 중의 pH 변화를 가져온 것으로 판단된다. 질산화 공정에서 각각 초기 암모니아성 질소 농도, 공급공기량, 접종한 활성슬러지 양에 비례해서 일정구간에서는 암모니아성 질소의 제거속도가 증가하였다. 질산화 공정에서 C/N 비의 영향은 일정 C/N 비 범위에서는 탄소원이 존재할수록 초기에 암모니아성 질소의 제거율이 증진되는 결과를 얻었다.