Textile Science and Engineering (한국섬유공학회지)

The Korean Fiber Society (한국섬유공학회)
권호 표지

Measurement of the Weaving Performance Factors on the Basis of Weaving Simulator

모사 장치를 이용한 경사 제직성능 평가 인자의 측정

  • Kim, Jong-Seong (Laboratory for Intelligent Process and Control, Kyung Hee University) ;
  • Yang, Hee-Won (Department of Mechanical Engineering, Graduate School, Kyung Hee University) ;
  • Lim, Jung-Ho (Department of Textile Engineering, Graduate School, Kyung Hee University) ;
  • Huh, You (Department of Mechanical Engineering, College of Engineering, Kyung Hee University)
  • 김종성 (경희대학교 지능공정 및 제어 연구실) ;
  • 양희원 (경희대학교 대학원 기계공학과) ;
  • 임정호 (경희대학교 대학원 섬유공학과) ;
  • 허유 (경희대학교 공과대학 기계공학과)
  • Published : 2009.08.31
⟨ Previous Next ⟩

Abstract

This study deals with developing a measuring system which can provide with information on the weaving performance of warp yarns, which works on the basis of a physical simulator. To reach the initially purposed intention, we measured the warp yarn tension. The measured signal was processed to produce the dynamic average tension, maximum and minimum tension values, and the tension change slope with respect to test cycles, etc.. Results revealed that information on the weaving performance factors such as hair occurrence, entanglement of warp yarns, yarn breakages, and the warp yarn tension relaxation as well could be extracted from the measured tension behavior of the warp yarns, which let the evaluation of the weaving performance of new warp yarns be conducted without direct loading of the yarns on the weaving machine so that the time and material required for weaving fabrics with new warp yarns can be drastically reduced.

Keywords

References

  1. M. Polke and F. Portele, 'State of Art and Development of Process Control Techniques for the Textile Industry', Melliand Textilber, 1984, 65, 291-297
  2. T. Ishida, 'Innovations in Weaving Machinery-the Course of Loom Development-', JTN, Osaka Senken Ltd., 1994
  3. A. K. Basu, ' Effect of Different Let-off Mechanisms on Fabric Formation and Dimension of Fabric in the Loom', Text Res J, 1987, 57, 379-386 https://doi.org/10.1177/004051758705700702
  4. S. Schlichter and J. Luenenschloss, 'Einfluss verschiedener Maschinen und Materialparameter auf Regeleigenschaften und Warenausfall beim Einsatz elektronisch gesteuerter Kettablassvorrichtung an Filamentgarnwebmaschinen', Melliand Textilberichte, 1987, 68, 821-825
  5. M. Azarschab, 'Kettfadenbeanspruchung beim Webprozess', Melliand Textilberichte, 1981, 62, 627-635
  6. Y. Huh, S. R. Moon, S. H. Jang, and S. G. Lee, 'Frequency Response Analysis of the Let-off Mechanism Driven by an Individual Motor', J Korean Fiber Soc, 1997, 34, 185-192
  7. S. K. Aggarwal， P. K. Hari, and T. A. Subramanian, 'Evaluation of Classimat Faults for Their Performance in Weaving', Text Res J, 1987, 57(12), 735-740 https://doi.org/10.1177/004051758705701210
  8. Uster Technologies AG, http://www.fuster.com/pdf/uster/uster_tensojet4_eng.pdf, 2007
  9. J. B. Dickson, 'Practical Loom Experience on Weavability Limits', Text Res J, 1954, 24, 1083-1093 https://doi.org/10.1177/004051755402401209
  10. A. Seyam and A. El-Shiekh, 'Mechanics of Woven Fabrics. Part I: Theoretical Investigation of Weavability Limit of Yams with Thickness Variation', Text Res J, 1990, 60(7), 389-404 https://doi.org/10.1177/004051759006000704
  11. A. Seyam and A. El-Shiekh， 'Mechnics of Woven Fabrics. Part II: Experimental Study of Weavability Limit of Yarns with Thickness Variation', Text Res J, 1990, 60(8), 457-463 https://doi.org/10.1177/004051759006000805
  12. A. Seyam and A. El-Shiekh, 'Mechanics of Woven Fabrics. Part III: Critical Review of Weavability Limit Studies', Text Res J, 1993, 63(7), 371-378 https://doi.org/10.1177/004051759306300701