Journal of the Korean Society for Nondestructive Testing (비파괴검사학회지)

The Korean Society for Nondestructive Testing (한국비파괴검사학회)
권호 표지

Development of Ultrasonic Wave Propagation Imaging System

  • Published : 2009.08.30
Download PDF
⟨ Previous Next ⟩

Abstract

Laser-based ultrasonic sensing requires the probe with fixed fecal length, but this requirement is not essential in laser-based ultrasonic generation. Based on this fact, we designed a pulsed laser-based ultrasonic wave propagation imaging (UWPI) system with a tilting mirror system for rapid scanning of target, and an in-line band-pass filtering capable of ultrasoaic mode selection. 1D-temporal averaging, 2D-spatial averaging, and 3D-data structure building algorithms were developed far clearer results allowing fur higher damage detectability. The imaging results on a flat stainless steel plate were presented in movie and snapshot formats which showed the propagation of ultrasound visible as a concentric wavefield emerging from the location of an ultrasonic sensor. A hole in the plate with a diameter of 1 mm was indicated by the scattering wavefields. The results showed that this robust UWPI system is independent of focal length and reference data requirements.

Keywords

References

  1. Fomitchov, P. A., Kromin, A. K., Krishnaswamy, S. and Achenbach, J. D. (2004) Imaging of Damage in Sandwich Composite Structures Using a Scanning Laser Source Technique, Composites: Part B, Vol. 35, pp. 557-562 https://doi.org/10.1016/j.compositesb.2004.04.007
  2. Huber, R. D., Candy, J. V. and Chambers, D. H. (2000) Review of Progress in Quantitative Nondestructive Evaluation, in: D. O. Thompson and D. E. Chimenti (Eds.), AlP Conference Proceeding, Vol. 509, American Institute of Physics, New York, pp. 859-864
  3. Lee, J. R. (2005) Spatial Resolution And Resolution in Phase-Shifting Laser Interferometry, Measurement Science and Technology, Vol. 16, pp. 2525-2533 https://doi.org/10.1088/0957-0233/16/12/018
  4. Lee, J. R., Takatsubo, J. and Toyama, N. (2007). Disbond Monitoring at Wing Stringer Tip Based on Built-in Ultrasonic Transducers and a Pulsed Laser, Smart Materials and Structures, Vol. 16, pp. 1025-1035 https://doi.org/10.1088/0964-1726/16/4/010
  5. Lee, J. R., Takatsubo, J., Toyama, N. and Kang, D. H. (2007) Health Monitoring of Complex Curved Structures Using an Ultrasonic Wavefield Propagation Imaging System, Meas. Sci. Technol., Vol. 18, pp. 3816-3824 https://doi.org/10.1088/0957-0233/18/12/017
  6. Michaels, T. E. and Michaels, J. E. (2006) Application of Acoustic Wavefield Imaging to Non-Contact Ultrasonic Inspection of Bonded Components, Review of Quantitative Nondestructive Evaluation, Vol. 25, pp. 1484-1491
  7. Raj, B., Mukhopadhyay, C. K. and Jayakumar, T. (2006) Frontiers in NDE Research Nearing Maturity for Exploitation to Ensure Structural Integrity of Pressure Retaining Components, Pressure Vessels and Piping, Vol. 83, pp. 322-335 https://doi.org/10.1016/j.ijpvp.2006.02.025
  8. Satyanarayan, L., Sridhar, C., Krishnamurthy, C. V. and Balasubramaniam, K. (2007) Simulation of Ultrasonic Phased Array Technique for Imaging and Sizing of Defects Using Longitudinal Waves, Pressure Vessels and Piping, Vol. 84, pp. 716-729 https://doi.org/10.1016/j.ijpvp.2007.08.002
  9. Scruby, C. B. and Drain, L. E. (1990) Laser Ultrasonics: Techniques and Applications, Adam Hilder, New York, Vol. 1, Chap. 1, pp. 6
  10. Sicard, R., Goyette, J. and Zellouf, D. (2002) A SAFT Algorithm for Lamb Wave Imaging of Isotropic Plate-Like Structures, Ultrasonics, Vol. 39, pp. 487-494 https://doi.org/10.1016/S0041-624X(01)00087-7
  11. Song, S. J., Shin, H. J. and Jang, Y. H. (2002) Development of an Ultrasonic Phased Array System for Nondestructive Tests of Nuclear Power Plant Components, Nuclear Engineering and Design, Vol. 214, pp. 151-161 https://doi.org/10.1016/S0029-5493(02)00024-9
  12. Spies, M. and Jager, W. (2003) Synthetic Aperture Focusing for Defect Reconstruction in Anisotropic Media, Ultrasonics, Vol. 41, pp. 125-131 https://doi.org/10.1016/S0041-624X(02)00407-9
  13. Staszewski, W. J., Lee, B. C. and Traynor, R. (2007) Fatigue Crack Detection in Metallic Structures with Lamb Waves and 3D Laser Vibrometry, Measurement Science and Technology, Vol. 18, pp. 727-739 https://doi.org/10.1088/0957-0233/18/3/024
  14. Yashiro, S., Takatsubo, J., Miyauchi, H. and Toyama, N. (2008) A Novel Technique for Visualizing Ultrasonic Waves in General Solid Media by Pulsed Laser Scan, NDT&E International, Vol. 41, pp. 137-144 https://doi.org/10.1016/j.ndteint.2007.08.002