DOI QR코드

DOI QR Code

A Study on the Flow Characteristics of the Spiral Flow Nozzle with the Width Change of Annular Slit

  • Kim, T.H. (School of Mechanical Engineering, Pukyong National University) ;
  • Setoguchi, T. (School of Mechanical Engineering, Pukyong National University) ;
  • Lee, Y.W. (School of Mechanical Engineering, Pukyong National University)
  • Published : 2009.08.31

Abstract

In comparison with previous researches fur swirling flow, the spiral flow self-generated in the spiral flow nozzle has some different characteristics. It is not needed a compulsive tangential momentum to get its velocity component and has long potential core, relatively low swirl ratio, and high focusing ability. In this study, the self-generated mechanism of the spiral flow was clarified and the effect on the width of annular slit on spiral flow characteristics was investigated experimentally and numerically. As a result, the existence of tangential velocity component regardless of a compulsive angular momentum is clarified and the results obtained by experiment have a satisfactory agreement with those by numerical method, quantitatively and qualitatively.

Keywords

References

  1. Kreith, F. and Sonju, O. K., "The Decay of a Turbulent Swirl in a Pipe", J Fluid Mech., Vol.22, part2, (1965), pp.257-271. https://doi.org/10.1017/S0022112065000733
  2. Horii, K., Matsumae, Y., Cheng, X. M., Takei, M. and Yasukawa, E., "Focusing Phenomena and Stability of Spiral-Flow Jet", Trans. Japan Soc. Aero. Space Sci., 33-102, (1991), pp. 141-153.
  3. Takei, M., Horii, K., Hashimoto, B., Kataoka, I., Ito, H. and Matsumae, Y., "High Stability of Spiral Jet-Relations between Axial Velocity Distribution and Stability", J of the Japan Soc. for Aeronautical and Space Sciences, Vol. 43, No. 494, (1995), pp. 9-16.
  4. T. Nishizawa, K. Funatsu, K. Horii, and Y. Tomita, "Characteristics of turbulent swirling flow in a straight pipe", Proceedings of JSME, No. 948-3, (1994), pp. 194-196.
  5. Miyazaki, K., Chen, G., Kudamatsuo, J., Sugimoto, T., Yamamoto, F. and Horii, K., "High-Efficiency Soil Transportation with Spiral Airflow", Japan Soc. Aero. Space Sci., Vol. 42, No. 137, (1999), pp. 105-111.
  6. Ueda, H., Sakai, M., Horii, K., Funatsu, K. and Tomita, Y., "Study of Swirling Pneumatic Transport of Granule in a Horizontal Pipe", Trans. Jpn. Soc. Mech.Eng., Vol. 67, No. 664, (2001), pp. 3011-3017. https://doi.org/10.1299/kikaib.67.3011
  7. Horii, K., Sawazaki, H., Matsumae, Y., Cheng, X. M., Take, M., Yasukawa, E. and Hashimoto, B., "New Continuous System for Dispersion and Encapsulation of Submicron Powders Using Spiral Flow", ASME-Industrial Application of Fluid Mechanics, Vol.FED-100, (1990), pp. 25-30.
  8. Takei, M., Horii, K., Hashimoto, B., Kataoka, I., Ito, H. and Matsumae, Y., "Cutting of Soft Materials Using of Spiral Water Jet", J of the Japan Soc. for Aeronautical and Space Sciences, Vol. 42, No. 490, (1994), pp. 36-47.
  9. Horii, K., Matsumae, Y., Ohsumi, K., Cheng, X. M., Kage, S. and Hashimoto, B., "Novel Optical Fiber Installation by Use of Spiral Flow", J. of Fluids Engineering, Vol. 114, (1992), pp. 373-378.
  10. Horii, K., Matsumae, Y., Cheng, X. M., Takei, M. and Hashimoto, B., "A Study of Spiral Flow (Part 4) The Effect of Radial Reynolds Number of Spiral Flow on Plasma Deposition of Pipe", Trans. Japan Soc. Aero. Space Sci., 32-98, (1992), pp. 165-175.
  11. Bhagwat, M. J., Leishman, J G., "Correlation of Helicopter Rotor Tip Vortex Measurements", AIAA Journal 38(2), (2000) pp. 301-308. https://doi.org/10.2514/2.957
  12. Yamane, T, Yamamoto, K., Enomoto, S., Takaki, R., Tamazaki, H., Makida, M., Tamamoto, T., Iwamiya, T. and Nakamura, T., "Current Status of Common CFD Platform-UPACS", Proc. of Aerospace Numerical Simulation Symposium 2000, (2000), pp. 45-50.
  13. Spalart, P. R. and Allmaras, S. R., "A One-equation Turbulence Model for Aerodynamics Flows", AIAA paper 92-0439, (1992).