Abstract
Research of accurate DEM generation using images of Kompsat-2 is not enough. This paper focused on generation of accurate Kompsat-2 DEM and comparison with DEM from common software like PCI Geomatica and ENVI. For Kompsat-2 DEM generation, we applied orbit-attitude sensor modeling technique and matching method based on epipolarity and image geometry. The comparison of performance with each commercial programs made a qualitative experiment through naked eyes and a quantitative experiment with USGS DTED. The accuracy was judged by the average absolute error and RMS error with DIED. The result of comparison experiment, we could confirm that the method used in the experiment showed much better performance than DEM made from other commercial programs in most of images.
현재 Kompsat-2 영상을 이용한 정밀 DEM 제작에 관한 연구는 미비한 실정이다. 본 논문에서는 Kompsat-2 위성영상을 이용하여 정밀 DEM을 제작하고, 이렇게 제작된 DEM을 상용 소프트웨어인 PCI Geomatica, ENVI에서 제작된 DEM과의 비교를 통해 그 성능을 분석하였다. DEM의 제작을 위해 Kompsat-2에 가장 적합하다고 보고된 궤도-자세각 모델을 사용하였으며, 에피폴라 곡선의 기하학적 요소들을 이용한 정합방식을 사용하여 Kompsat-2 DEM의 제작을 시도하였다. 각 상용프로그램과의 성능의 비교는 육안을 통한 정성적 실험과, USGS DTED를 이용한 정량적 실험으로 이루어졌다. 정확도는 DTED와의 평균절대오차, RMS 오차로 판단하였으며, 비교 실험 결과, 대부분의 영상에서 실험에 사용한 방식이 다른 상용 프로그램에서 제작된 DEM보다 더 좋은 성능을 보여줌을 확인할 수 있었다.