References
- 이문주, 최성근, 추현욱, 조용순, 이우진(2008) 낙사법으로 조성된 대형 석고 고결시료의 균질성, 한국지반공학회논문집, 한국지반공학회, Vol. 24, No. 1, pp. 91-99.
- Abdulla, A.A. and Kiousis, P.D. (1997) Behavior of cemented sands - I. Testing. International Journal for Numerical and Analytical Methods in Geomechnics, Vol. 21, No. 8, pp. 533-547. https://doi.org/10.1002/(SICI)1096-9853(199708)21:8<533::AID-NAG889>3.0.CO;2-0
- Acar, Y.B. and El-Tahir, E.A. (1986) Low strain dynamic properties of artificially cemented sand. Journal of Geotechnical Engineering, ASCE, Vol. 112, No. 11, pp. 1001-1015. https://doi.org/10.1061/(ASCE)0733-9410(1986)112:11(1001)
- Altun, S. and Goktepe, A.B. (2006) Depedence of dynamic shear modulus of uniform sands on stress level and density. Civil Engineering and Environmental Systems, Vol. 23, No. 2, pp. 101-116. https://doi.org/10.1080/10286600600743372
- Baig, S., Picornell, M., and Nazarian, S. (1997) Low strain shear moduli of cemented sands. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 123, No. 6, pp. 540-545. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:6(540)
- Chang, T.S. and Woods, R.D. (1992) Effect of particle contact bond on shear modulus. Journal of Geotechnical Engineering, ASCE, Vol. 118, No. 8, pp. 1216-1233. https://doi.org/10.1061/(ASCE)0733-9410(1992)118:8(1216)
- Chiang, Y.C. and Chae, Y.S. (1972) Dynamic Properties of Cement Treated Soils, Highway Research Record 379, Highway Research Board, National Academy of Science, Washingto, D. C., pp. 39-51.
- Choi, S.K. (2008) Estimation of stress history of sands using CPT and DMT, Ph.D. thesis, Korea University.
-
Dyvik, R. and Madshus, C. (1985) Lab measurements of
$G_{max}$ using bender element, Proceeding, ASCE Conventionon Advances in the Art of Testing Soils under Cyclic Condition, pp. 186-196. - Fernandez, A.Z. (2000) Tomographic imaging the state of stress, Ph.D. thesis, Civil Engineering, Georgia Institute of Technology, Atlanta.
- Fernandez, A.Z. and Santamarina, J.C. (2001) Effect of cementation on the small-strain parameters of sands. Canadian Geo-technical Journal, Vol. 38, pp. 191-199. https://doi.org/10.1139/cgj-38-1-191
- Hardin, B.O. and Drnevich, V.P. (1972) Shear modulus and damping in soils: design equations and curves. Journal of Soil Mechanics and Foundation Engineering Division, ASCE, Vol. 98, pp. 667-692.
- Hardin, B.O. and Richart, F.E. (1963) Elastic wave velocities in granular soils. Journal of Soil Mechanics and Foundation Engineering Division, ASCE, Vol. 89, pp. 603-624.
- Ismail, M.A., Joer, H.A, Sim, W.H., and Randolph, M.F. (2002) Effect of cement type on shear behavior of cemented calcareous soil. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 128, No. 6, pp. 520-529. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:6(520)
- Iwasaki, T. and Tatsuoka, F. (1977) Effect of grain size and grading on dynamic shear moduli of sands. Soils and Foundation, Vol. 17, No. 3, pp. 19-35. https://doi.org/10.3208/sandf1972.17.3_19
- Iwasaki, T., Tatsuoka, F., and Takagi, Y. (1978) Shear moduli of sands under cyclic torsional shear loading. Soils and Foundations, Vol. 18, No. 1, pp. 39-56. https://doi.org/10.3208/sandf1972.18.39
- Kim, T.J. (2005) Dissipation of porewater pressure due to piezocone penetration in OC clay, Ph.D. dissertation, Korea University.
- Lee, J.S. (2003) High resolusion geophysical techniques for small-scale model testing. Ph.D. thesis, Civil Engineering, Georgia Institute of Technology, Atlanta.
- Lee, J.S. and Santamarina, J.C. (2005) Bender elements: Performance and signal interpretation. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 131, No. 9, pp. 1063-1070. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:9(1063)
- Lo Presti, D.C.F., Jamiolkowski, M., Pallara, O., Cavallaro, A., and Pedroni, S. (1997) Shear modulus and damping of soils. Geotechnique, Vol. 47, No. 3, pp. 603-617. https://doi.org/10.1680/geot.1997.47.3.603
- Mohsin, A.K.M. and Airey, D.W. (2005) Influence of cementation and density on Gmaxforsand, International Conferenceon Soil Mechanics and Foundation Engineering(ICSMFE), Tokyo, Japan, pp. 413-416.
- Puppala, A.J., Acar, Y.B., and Tumay, M.T. (1995) Cone penetration in very weakely cemented sand. Journal of Geotechnical Engineering, ASCE, Vol. 121, No. 8, pp. 589-600. https://doi.org/10.1061/(ASCE)0733-9410(1995)121:8(589)
- Rad, N.S. and Tumay, M.T. (1986) Effect of cementation on the cone penetration resistance of sand, Use of In Situ Tests in Geotechnical Engineering, GSP 6, ASCE, New York, pp. 926-948.
- Roesler, S.K. (1979) Anisotropic shear modulus due to stress anisotropy, Journal of Geotechnical Engineering, ASCE, Vol. 105, No. 7, pp. 871-880.
- Santamarina, J.C., Klein, K.A., and Fam, M.A. (2001) Soils and Waves - Particulate Materials Behavior, Characterization and Process Monitoring, John Wiley and Sons, NewYork.
- Saxena, S., Avramidis, A.S., and Reddy, K.R. (1988) Dynamic moduli and damping ratio for cemented sands at low strains. Canadian Geotechnical Journal, Vol. 25, pp. 353-368. https://doi.org/10.1139/t88-036
- Schnaid, F., Prietto, P.D.M., and Consoli, N.C. (2001) Characterization of cemented sand in triaxial compression. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 127, No. 10, pp. 857-868. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:10(857)
- Stokoe, K.H., Lee, S.H.H., and Knox, D.P. (1985) Shear Moduli Measurements Under True Tri-Axial Stresses, Proceedings of Advancesin the Art of Testing Soils under Cyclic Conditions, ASCE, NewYork, pp. 166-185.
- Sweeney, B.P. and Clough, G.W. (1990) Design of a large calibration chamber, Geotechnical Testing Journal, ASTM, Vol. 13, No. 1, pp. 36-44. https://doi.org/10.1520/GTJ10144J
- Viggiani, G. and Atkinson, J.H. (1995) Interpretation of bender element tests, Geotechnique, Vol. 45, No. 1, pp. 149-154. https://doi.org/10.1680/geot.1995.45.1.149
-
Yun, T.S. and Santamarina, J.C. (2005) Decementation, softening, and collapse: changes in small-strain shear stiffness in
$K_0$ loading, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 131, No. 3, pp. 350-358. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:3(350)