DOI QR코드

DOI QR Code

Structural Optimization and Improvement of Initial Weight Dependency of the Neural Network Model for Determination of Preconsolidation Pressure from Piezocone Test Result

피에조콘을 이용한 선행압밀하중 결정 신경망 모델의 구조 최적화 및 초기 연결강도 의존성 개선

  • 김영상 (전남대학교 건설환경공학부) ;
  • 주노아 ((주)다산이엔지 지반부) ;
  • 박현일 (삼성물산(주) 건설부문 기술연구센터) ;
  • 박솔지 (전남대학교 대학원 건설환경공학과)
  • Received : 2009.02.16
  • Accepted : 2009.03.15
  • Published : 2009.05.31

Abstract

The preconsolidation pressure has been commonly determined by oedometer test. However, it can also be determined by insitu test, such as piezocone test with theoretical and(or) empirical correlations. Recently, Neural Network (NN) theory was applied and some models were proposed to estimate the preconsolidation pressure or OCR. It was already found that NN model can come over the site dependency and prediction accuracy is greatly improved when compared with present theoretical and empirical models. However, since the optimization process of synaptic weights of NN model is dependent on the initial synaptic weights, NN models which are trained with different initial weights can't avoid the variability on prediction result for new database even though they have same structure and use same transfer function. In this study, Committee Neural Network (CNN) model is proposed to improve the initial weight dependency of multi-layered neural network model on the prediction of preconsolidation pressure of soft clay from piezocone test result. Prediction results of CNN model are compared with those of conventional empirical and theoretical models and multi-layered neural network model, which has the optimized structure. It was found that even though the NN model has the optimized structure for given training data set, it still has the initial weight dependency, while the proposed CNN model can improve the initial weight dependency of the NN model and provide a consistent and precise inference result than existing NN models.

지반의 응력이력을 정의하는데 이용되는 선행압밀하중은 일반적으로 일차원 실내압밀실험으로부터 결정되어져 왔으나 피에조콘과 같은 원위치 시험의 관측값을 이용한 이론적인 방법과 경험적인 상관관계를 통한 결정도 가능하다. 최근 선행압밀하중을 결정하기 위한 인공신경망 모델들이 제안된 바 있으며, 기존의 이론적 경험적 선행압밀하중 추정 방법들이 갖는 지역의존성의 문제를 극복하고 예측 정확도 면에서도 크게 개선된 것으로 보고되었다. 그러나 인공신경망 모델은 모델구조와 학습과정에서 초기에 무작위로 부여되는 연결강도에 영향을 받아 예측에 변동성이 존재한다. 본 연구에서는 기존의 피에조콘 결과를 이용한 선행압밀하중 추정 인공신경망 모델이 연약지반에서 선행압밀하중 예측 시 보이는 변동성을 개선하기 위하여 신경망 모델의 구조 최적화를 수행하고 군집신경망 모델을 구축하였다. 제안된 군집신경망 모델을 이용한 예측결과는 기존의 다층신경망 모델 및 이론적 경험적 모델들과 비교되었다. 연구결과, 최적화된 구조를 갖는 다층신경망 모델일지라도 초기 연결강도에 따라 최종 학습 후 예측결과의 변동성이 여전히 존재하나, 다층신경망을 네트워크로 연결하여 제안된 군집신경망 모델은 기존의 다층신경망 모델들이 갖는 초기 연결강도 의존성을 개선하여 다층신경망 모델에 비해 일관성 있으며 보다 정확한 예측이 가능한 것으로 나타났다.

Keywords

References

  1. 김병탁, 김영수, 배상근(2001) 압축지수의 추정을 위한 인공신경망 적용과 경험식 제안, 한국지반공학회논문집, 한국지반공학회, 제17권, 제6호, pp. 25-36.
  2. 김영상, 이승래, 김종수(2002) 피에조콘을 이용한 연약지반 선행압밀하중 결정의 인공신경망 이론 적용 연구, 대한토목학회논문집, 대한토목학회, 제22권, 제6-C호, pp. 623-633.
  3. 김영상, 주노아, 이종재(2007) 군집신경망과 확률신경망 이론을 이용한 연약지반의 측방유동 평가 모델, 한국지반공학회논문집, 한국지반공학회, 제23권, 제7호, pp. 65-76.
  4. 김태준, 박봉기, 이재성, 전일수, 이충원, 정충열, 변영기, 윤현진, 이우진(2002), 선행압밀하중 결정방법의 비교분석, 한국지반공학회 연약지반기술위원회 2002 학술세미나, 한국지반공학회
  5. 박현일, 권기철, 황대진, 이승래(2005) 최적의 인공신경망 구조설계를 통한 지반 물성치 추정, 한국지반공학회논문집, 한국지반공학회, 제21권, 제9호, pp. 25-34.
  6. 이강운, 윤길림, 채영수(2002) 해성점토 지반에서 CPT를 이용한 응력이력(OCR, $\sigma^{1}p$)의 산정, 한국지반공학회논문집, 한국지반공학회, 제18권, 제6호, pp. 73-81.
  7. 이성진, 이승래, 장범수(2002) 인공신경망 모델을 이용한 불포화겉보기점착력 추정에 관한 연구, 대한토목학회논문집, 대한토목학회, 제22권, 제3-C호, pp. 331-344.
  8. 장인성, 권오순, 정충기, 김명모(2002) 피에조콘 관입시험 결과와 점성토의 과압밀비의 관계, 대한토목학회논문집, 대한토목학회, 제22권, 제6-C호, pp. 651-659.
  9. 황명기, 김지형, 김영욱(2003) 초음파-토양수세법을 이용한 오염지반 복원률증대에 인공신경망의 적용, 한국지반공학회논문집, 한국지반공학회, 제19권, 제6호, pp. 343-350.
  10. Chen, B.S.Y. (1994) Profiling stress history of clays using piezocone with dual pore pressure measurements, Ph.D. thesis, Georgia Institute of Technology, p. 350.
  11. Chen, B.S.Y. and Mayne, P.W. (1996) Statistical relation ships between piezocone measurements and stress history of clays, Canadian Geotechincal Journal, Vol. 33, pp. 488-498. https://doi.org/10.1139/t96-070
  12. Konrad, J-M., and Law, K.T. (1987) Preconsolidation pressure from piezocone tests in marine clays, Geotechnique, Vol. 32, No. 2, pp. 177-190.
  13. Kurup, P.U. and Dudani, N.K. (2002) Neural networks for profiling stress history of clays from PCPT data, Journal of Geotechincal and Geoenvironmental Engineering, Vol. 128, No. 7, July, pp. 569-579. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:7(569)
  14. Lee, I. M. and Lee, J. H. (1996) Prediction of pile bearing capacity using artificial neural networks, Computers and Geotechnics, Vol. 18, No. 3, pp. 189-200. https://doi.org/10.1016/0266-352X(95)00027-8
  15. Lee, J.W., Yi, J.H., Kim, J.D., and Yun, C.B. (2004) Health monitoring method using committee of neural networks, Key Engineering Materials, Vol. 270-273, pp. 1983-1988. https://doi.org/10.4028/www.scientific.net/KEM.270-273.1983
  16. Lunne, T., Robertson, P.K., and Powell, J.J.M. (1997) Cone penetration testing in geotechnical practice, Taylor & Fancis.
  17. Mayen, P.W. (1991) Determination of OCR in clay by piezocone tests using cavity expansion and critical state concepts, Soils and Foundations, Vol. 31, pp. 65-76. https://doi.org/10.3208/sandf1972.31.2_65
  18. Rahman, M.S., Wang, J., Deng, W., and Carter, J.P. (2001) A neural network model for the uplift capacity of suction caissions, Computers and Geotechnics, Vol. 39, pp. 337-356.