Abstract
This paper describes the result of study on measurement of displacement of structure by means of non-contacting method, close-range digital photogrammetry using digital camera. To apply close-range digital photogrammetry to displacement measurement of structure, correction of lens distortion that interferes geometrical analysis has been carried out and then measuring displacement was performed on load regulated-rahmen. For enhanced applicability of displacement measurement, MIDAS which is a structural analysis program was used for modeling and the result was taken from comparative analysis. As a result of the study, it is showed that close-range digital photogrammetry could supplement several weaknesses of LVDT and cable displacement meter and, especially, economy in the perspective of measuring time could be realized. Close-range digital photogrammetry using digital camera can be applied to the area where requires visual analysis such as 3D modeling of structure, profile replication of measurement of structure as well as measurement of displacement of structure.
본 연구는 구조물의 변위계측에 있어 비접촉방법인 디지털 카메라를 이용한 근접수치사진측량을 이용한 실험결과를 제시한 것이다. 근접수치사진측량을 구조물 변위계측에 적용하기 위하여 본 연구에서는 카메라 자체검정을 통하여 기하학적 해석 정확도를 저해하는 렌즈의 왜곡에 대한 보정을 실시한 후 구조물의 변위계측을 위하여 자체제작한 라멘구조물에 각각의 하중을 재하하여 변위계측을 실시하였다. 또한 변위계측시 현장 적용성을 높이기 위하여 구조해석 프로그램인 MIDAS를 이용하여 모델링한 후 비교분석하였다. 그 결과 현재 구조물 안전진단에 활용되고 있는 LVDT, 케이블식변위계등 접촉식변위계가 가지고 있는 단점인 현장접근의 어려움, 설치비 과다등의 단점을 극복할 수 있는 가능성을 제시하였으며, 특히 실측 시간의 단축으로 인한 경제성을 확보할 수 있었다. 따라서 디지털 카메라를 이용한 근접수치사진측량은 구조물의 변위계측 뿐만 아니라 구조물의 3차원 모델링, 구조물의 실측형상재현 등 시각적 분석이 필요한 분야에 다양하게 활용될 수 있을 것으로 판단된다.