대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제33권10호
  • /
  • Pages.1099-1107
  • /
  • 2009
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

축소모델을 이용한 차륜답면형상 답면구배에 따른 안정성 평가

Stability Evaluation of the Railway Bogie According to the Tread Inclination of Wheel Profile Using Scale Model

  • 허현무 (한국철도기술연구원 주행추진연구실) ;
  • 유원희 (한국철도기술연구원 주행추진연구실) ;
  • 김남포 (한국철도기술연구원 주행추진연구실) ;
  • 박태원 (아주대학교 기계공학과)
  • 발행 : 2009.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Numerical simulation and experimental study to evaluate the critical speed of the railway bogie according to the tread inclination of wheel profile were conducted using 1/5 scale model. It has been shown that the results of the critical speed analysis for the scale bogie model is very close to the test results using scale bogie model and the critical speed is decreased in proportion to the increase of equivalent conicity of wheel profile. Results of this study show that the scale model could be applied to research area relating to vehicle stability as an alternative to overcome the experimental problems caused by full scale test on the roller rig.

키워드

참고문헌

  1. Klingel, 1883, 'Uber den Lauf der Eisenbahnwagen auf Gerarder Bahn,' Organ Fortsch Eisenb-wes. 38, pp.113-123
  2. Pooley, R. A., 1965, 'Assessment of the Critical Speeds of Various Types of Four-Wheeled Vehicles,' British Railways Research department Report E557
  3. Cooperrider, N. K., 1972, 'The Hunting Behaviour of Conventional Railway Trucks,' ASME J. Eng. Industry 94, pp. 752-762 https://doi.org/10.1115/1.3428240
  4. Hannebrink, D. N., Lee, H. S. H., Weinstock, H. and Hedrick, J. K., 1977, 'Influence of Axle Load, Track Gage, and Wheel Profile on Rail Vehicle Hunting,' Transactions of the ASME, pp.186-195
  5. Hiroshi Fujimoto, 1998, 'Influence of Arc and Conic Profile on Vehicle Dynamics,' JSME, Vol. 64, No. 621, pp.1520-1527 https://doi.org/10.1299/kikaic.64.1520
  6. Kevin Sawley, Huimin Wu, 2005, 'The Formation of Hollow-Worn Wheels and Their Effect on Wheel/Rail Interaction,' Wear, Vol. 258, pp. 1179-1186 https://doi.org/10.1016/j.wear.2004.03.029
  7. Bosso, N., Gugiotta, A. and Soma, A., 2002, 'Comparison of Different Scaling Techniques for The Dynamics of a Bogie on Roller Rig,' Vehicle System Dynamics, pp. 514-530
  8. Bosso, N., Gugiotta, A. and Soma, A., 2006, 'Dynamic Identification of a 1/5 Scaled Railway Bogie on Rolling Rig,' Sc. and Tech. Bull. of the 'Aurel Vlaicu' Univ. Arad, Mech. Eng. 2 (1), pp. 5- 15
  9. Hur, H.M., Park, J.H., Kim, M.S., You, W.H. and Park, T.W., 2007, 'A Study on the Critical Speed of 1/5 Scaled Bogie Model,' Korean Soecity for Railway, Vol. 10, No. 6, pp.800-805
  10. You, W.H. and Hur, H.M., 2007, 'Development of the Active Steering Bogie System for Eco-friendly Urban Trains,' KRRI Report 07-101, Korea Railroad Research Institute, pp.231-245
  11. Hur, H.M., 2006, 'A Study on the Characteristics of the Wheel/Roller Contact Geometry,' Korean Society for Railway, Vol. 9, No. 5, pp.618-623
  12. Zeng, J., Zhang, W.H., Dai, H.Y., Wu, X.J. and Shen, Z.Y., 1998, 'Hunting Instability Analysis and H$\infty$Controlled Stabilizer Design for High Speed Railway Passenger Car,' Vehicle System Dynamics, pp. 655-668
  13. Oldrich Polach, 1999, 'A Fast Wheel/Rail Forces Calculation Computer Code,' Vehicle System Dynamics, pp. 728-739
  14. Simon Iwnicki, 2006, 'Handbook of Railway Vehicle Dynamics,' CRC Press
  15. Hur, H.M., 2004, 'Development of the Economical Wheel Maintenance Technology,' KRRI Report, Korea Railroad Research Institute, pp.101-105