참고문헌
- N. Keller, C. Pham-Huu, S. Roy, M. J. Ledoux, C. Estournes, and J. Guille, “Influence of the Preparation Conditions on the Synthesis of High Surface Area SiC for Use as a Heterogeneous Catalyst Support,” J. Mater. Sci., 34 3189-202 (1999) https://doi.org/10.1023/A:1004681806843
- S. S. Hwang and T. W. Kim, “Fabrication and Properties of Reaction Bonded SiC Hot Gas Filter Using Si Melt Infiltration Method(in Korean),” J. Kor. Ceram. Soc., 40 [9] 891-96 (2003) https://doi.org/10.4191/KCERS.2003.40.9.891
- S. H. Lee and Y.-W. Kim, “Processing of Cellular SiC Ceramics Using Polymer Microbeads,” J. Kor. Ceram. Soc., 43 [8] 458-62 (2006) https://doi.org/10.4191/KCERS.2006.43.8.458
- J. H. Eom, D. H. Jang, Y.-W. Kim, I. H. Song, and H. D. Kim, “Low Temperature Processing of Porous Silicon Carbide Ceramics by Carbothermal Reduction(in Korean),” J. Kor. Ceram. Soc., 43 [9] 552-57 (2006) https://doi.org/10.4191/KCERS.2006.43.9.552
- S. H. Yun, P. N. Tan, Y. D. Kim, and S. W. Park, “Effects of Amounts of Carbon Source and Infiltrated Si on the Porosity and Fracture Strength of Porous Reaction Bonded SiC(in Korean),” J. Kor. Ceram. Soc., 44 [7] 381-86 (2007) https://doi.org/10.4191/KCERS.2007.44.7.381
- J. J. Kyung, J. J. Kim, S. R. Kim, W. T. Kwon, K. Y. Cho, and Y. H. Kim, “Preparation of Characterization of SiC Coated Graphite Foam(in Korean),” J. Kor. Ceram. Soc., 44 [11] 622-26 (2007) https://doi.org/10.4191/KCERS.2007.44.1.622
- S. H. Kim, Y.-W, Kim, J. Y. Yun, and H. D. Kim, “Fabrication of Porous SiC Ceramics by Partial Sintering and their Properties( in Korean),” J. Kor. Ceram. Soc., 41 [7] 541-47 (2004) https://doi.org/10.4191/KCERS.2004.41.7.541
- V. Z. Stavric and M. Hue, “Rekristallisiertes Siliziumkarbid,” Keram. Zeit., 27 [3] 125-28 (1975)
-
X. Yao, S. Tan, X. Zhang, Z. Huang, and D. Jiang, “Low- Temperature Sintering of SiC Reticulated Porous Ceramics with
$MgO-Al_2O_3-SiO_2$ Additives as Sintering Aids,” J. Mater. Sci., 42 4960-66 (2007) https://doi.org/10.1007/s10853-006-0473-1 - K. S. Seo, S. W. Park, and H. B. Kwon, “Fabrication of Porous RBSC by Si Melt Infiltration(in Korean),” J. Kor. Ceram. Soc., 37 [11] 1119-25 (2000)
- J. H. Eom, Y.-W. Kim, I. H. Song, and H. D. Kim, “Processing and Properties of Polysiloxane-Derived Porous Silicon Carbide Ceramics Using Hollow Microspheres as Templates,” J. Europ. Ceram. Soc., 28 1029-35 (2008) https://doi.org/10.1016/j.jeurceramsoc.2007.09.009
- Y.-W. Kim, J. H. Eom, C. Wang, and C. B. Park, “Processing of Porous Silicon Carbide Ceramics from Carbon- Filled Polysiloxane by Extrusion and Carbothermal Reduction,” J. Am. Ceram. Soc., 91 [4] 1361-64 (2008) https://doi.org/10.1111/j.1551-2916.2008.02280.x
- K. Y. Lim, Y.-W. Kim, S. K. Woo, and I. S. Han, “Effect of Si:C Ratio on Porosity and Flexural Strength of Porous Self- Bonded Silicon Carbide Ceramics(in Korean),” J. Kor. Ceram. Soc., 45 [5] 285-89 (2008) https://doi.org/10.4191/KCERS.2008.45.5.285
- K. Y. Lim, Y.-W. Kim, S. K. Woo, and I. S. Han, “Effect of Carbon Source on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics(in Korean),” J. Kor. Ceram. Soc., 45 [7] 430-37 (2008) https://doi.org/10.4191/KCERS.2008.45.7.430
- S. Prochazka, “The Role of Boron and Carbon in the Sintering of Silicon Carbide,” in “Special Ceramic 6,” British Ceram. Res. Ass., 171-81 (1975)
- S. Prochazka and R. M. Scanlan, “Effect of Boron and Carbon on Sintering of SiC,” J. Am. Ceram. Soc., 58 [1-2] 72 (1975) https://doi.org/10.1111/j.1151-2916.1975.tb18990.x
- R. A. Alliegro, L. B. Coffin, and J. R. Tinklepaugh, “Pressure Sintered Silicon Carbide,” J. Am. Ceram. Soc., 39 386-89 (1956) https://doi.org/10.1111/j.1151-2916.1956.tb15609.x
-
S. Honda, T. Nagano, K. Kaneko, and H. Kodama, “Compressive Deformation Behavior of Al-doped
$\beta$ -SiC at Elevated Temperature,” J. Europ. Ceram. Soc., 22 979-85 (2002) https://doi.org/10.1016/S0955-2219(01)00406-X - J. H. Eom, Y.-W. Kim, I. H. Song, and H. D. Kim, “Microstructure and Properties of Porous Silicon Carbide Ceramics Fabricated by Carbothermal Reduction and Subsequent Sintering Process,” Mater. Sci. Eng. A, 464 129-34 (2007) https://doi.org/10.1016/j.msea.2007.03.076
피인용 문헌
- Flexural Strength of Macroporous Silicon Carbide Ceramics vol.48, pp.5, 2011, https://doi.org/10.4191/kcers.2011.48.5.360