참고문헌
- C. A. Schuh, T. G. Nieh, and H. Iwasaki, “The Effect of Solid Solution W Additions on the Mechanical Properties of Nanocrystalline Ni,” Acta Mater., 51 [2] 431-43 (2003) https://doi.org/10.1016/S1359-6454(02)00427-5
- C. P. Dogan and J. A. Hawk, “Microstructure and Abrasive Wear in Silicon Nitride Ceramics,” Wear, 250 [1-12] 256-63 (2001) https://doi.org/10.1016/S0043-1648(01)00649-4
- H. D. Kim, Y. J. Park, B. D. Han, M. W. Park, W. T. Bae, Y. W. Kim, H. T. Lin, and P. F. Becher, “Fabrication of Dense Bulk Nano-Si3N4 Ceramics without Secondary Crystalline Phase,” Script. Mater., 54 [4] 615-19 (2006) https://doi.org/10.1016/j.scriptamat.2005.10.032
-
J. Luo, K. Zhang, G. Wang, and W. Han, “Fabrication of Fine-Grained
$Si_3N_4-Si_2N_2O$ Composites by Sintering Amorphous Nano-Sized Silicon Nitride Powders,” J. Wuhan Univ. Tech. -Mater. Sci. Ed., 21 [003] 97-9 (2006) https://doi.org/10.1007/BF02840891 -
X. Xu, T. Nishimura, N. Hirosaki, R. J. Xie, and H. Tanaka, “Fabrication of a
$Nano-Si_3N_4/Nano-C$ Composite by High- Energy Ball Milling and Spark Plasma Sintering,” J. Am. Ceram. Soc., 90 [4] 1058-62 (2007) https://doi.org/10.1111/j.1551-2916.2007.01593.x - T. Nishimura, M. Mitomo, H. Hirotsuru, and M. Kawahara, “Fabrication of Silicon Nitride Nano-Ceramics by Spark Plasma Sintering,” J. Mater. Sci. Lett., 14 [15] 1046-47 (1995) https://doi.org/10.1007/BF00258160
- I. Tanaka, G. Pezzotti, T. Okamoto, Y. Miyamoto, and M. Koizumi, “Hot Isostatic Press Sintering and Properties of Silicon Nitride without Additives,” J. Am. Ceram. Soc., 72 [9] 1656-60 (1989) https://doi.org/10.1111/j.1151-2916.1989.tb06298.x
- Y. L. Li, Y. Liang, F. Zheng, X. F. Ma, and S. J. Cui, “Sintering of Nanopowders of Amorphous Silicon Nitride under Ultrahigh Pressure,” J. Mater. Res., 15 [4] 988-94 (2000) https://doi.org/10.1557/JMR.2000.0141
- X. Xu, T. Nishimura, N. Hirosaki, R. J. Xie, Y. Zhu, Y. Yamamoto, and H. Tanaka, “New Strategies for Preparing Nanosized Silicon Nitride Ceramics,” J. Am. Ceram. Soc., 88 [4] 934-37 (2005) https://doi.org/10.1111/j.1551-2916.2005.00187.x
- G. R. Anstis, P. Chantikul, B. R. Lawn, and D. B. Marshall, “A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements,” Eng. Fract. Mech., 4 175-79 (1972) https://doi.org/10.1111/j.1151-2916.1981.tb10321.x
- D. S. Lim, J. W. An, and H. J. Lee, “Effect of Carbon Nanotube Addition on the Tribological Behavior of Carbon/Carbon Composites,” Wear, 252 [5-6] 512-17 (2002) https://doi.org/10.1016/S0043-1648(02)00012-1
- G. Petzow and M. Herrmann, “Silicon Nitride Ceramics,” Struct. Bond., 102 [53] 106-29 (2002)
- D. H. Jeong, F. Gonzalez, G. Palumbo, K. T. Aust, and U. Erb, “The Effect of Grain Size on the Wear Properties of Electrodeposited Nanocrystalline Nickel Coatings,” Script. Mater., 44 [3] 493-99 (2001) https://doi.org/10.1016/S1359-6462(00)00625-4
- N. P. Suh, “Delamination Theory of Wear,” 25 [1] 111-24 (1973) https://doi.org/10.1016/0043-1648(73)90125-7
- O. Desa and S. Bahadur, “Material Removal and Subsurface Damage Studies in Dry and Lubricated Single-Point Scratch Tests on Alumina and Silicon Nitride,” Wear, 225 1264-75 (1999) https://doi.org/10.1016/S0043-1648(99)00048-4
- D. C. Cranmer, “Friction and Wear Properties of Monolithic Silicon-Based Ceramics,” J. Mater. Sci., 20 [6] 2029-37 (1985) https://doi.org/10.1007/BF01112286
- Y. Wang and S. M. Hsu, “Wear and Wear Transition Mechanisms of Ceramics,” Wear, 195 [1-2] 112-22 (1996) https://doi.org/10.1016/0043-1648(95)06800-7
- T. E. Fischer and H. Tomizawa, “Interaction of Tribochemistry and Microfracture in the Friction and Wear of Silicon Nitride,” Wear, 105 29-45 (1985) https://doi.org/10.1016/0043-1648(85)90004-3