DOI QR코드

DOI QR Code

상안정화된 Leucite의 미세분말 합성과 열적 팽창 특성 연구

Fabrication of Stabilized Fine Leucite Powder and Its Thermal Expansion Properties

  • Hong, Sung-Jin (School of Advanced Materials Science Engineering, Sungkyunkwan University) ;
  • Kim, Deug-Joong (School of Advanced Materials Science Engineering, Sungkyunkwan University) ;
  • Yoo, Young-Sung (Korea Electric Power Research Institute)
  • 발행 : 2009.09.30

초록

Phase stabilized leucite, which has high coefficient of thermal expansion, was synthesized, and its thermal expansion behavior was investigated. The homogeneous leucite phase was synthesized by solid state reaction from the mixture of $K_2CO_3-Al_2O_3-SiO_2$. and its stabilization from tetragonal to cubic phase was attempted by adding $Cs_2CO_3$ into starting materials. And fine powder with an average particle size of a few hundreds ${\mu}m$ were fabricated by planetary milling. During milling, amorphization of leucite was observed and recrystallized after heat treatment. The thermal expansion behavior of tetragonal and cubic leucite has measured and discussed. The average coefficient of thermal expansion of tetragonal and cubic phase leucite from room temperature to $750^{\circ}C$ was $21.4{\times}10^{-6}/^{\circ}C$ and $14.5{\times}10^{-6}/^{\circ}C$, respectively.

키워드

참고문헌

  1. T. Ota, M. Takahashi, Iwao Yamai, and H. Suzuki, “High Thermal Expansion $KAlSiO_4$ Ceramic,” J. Mater. Sci., 31 1431-33 (1996) https://doi.org/10.1007/BF00357849
  2. T. Ota, M. Takahashi, Iwao Yamai, and H. Suzuki, “Highthermal- expansion Polycrystalline Leucite Ceramic,” J. Am. Ceram. Soc., 76 2379-81 (1993) https://doi.org/10.1111/j.1151-2916.1993.tb07782.x
  3. D. Taylor, “The Thermal Expansion Behaviour of the Frame Work Silicates,” Mineral. Mag., 38 593-604 (1972) https://doi.org/10.1180/minmag.1972.038.297.08
  4. D. Taylor and C. M. B. Henderson, “The Thermal Expansion of the Leucite Group of Minerals,” Am. Mineral, 53 1476-89 (1968)
  5. S. P. Simner and J. W. Stevenson, “Compressive Mica Seals for SOFC Applications,” J. Power Sources, 102 310-6 (2001) https://doi.org/10.1016/S0378-7753(01)00811-4
  6. I. L. Denry, J. R. Mackert Jr., J. A. Holloway, and S. F. Rosenstiel, “Effect of Cubic Leucite Stabilization on the Flexural Strength of Feldspathic Dental Porcelain,” J. Dent. Res., 75 1928-35 (1996) https://doi.org/10.1177/00220345960750120301
  7. S. T. Rasmussen, C. I. McLauren, and W. J. O'Brien, “The Effect of Cesium-containing Leucite Additions on the Thermal and Mechanical Properties of Two Leucite-based Porcelains.” J. Biomedic. Mater. Res., 69B 195-204 (2003) https://doi.org/10.1002/jbm.b.30008
  8. A. Kloužková, M. Mrázová, and M. Kohoutková, “Synthesis of Partially Stabilized Leucite,” J. Phy. and Chem. Sol., 68 1207-10 (2007) https://doi.org/10.1016/j.jpcs.2007.03.055
  9. J. R, Mackert Jr, M. B. Butts, and C. W. Fairhurst, “The Effect of the Leucite Transformation on Dental Porcelain Expansion,” Dent. Mater., 2 32-6 (1986) https://doi.org/10.1016/S0109-5641(86)80067-7