References
- S.J. Dapkunas, “Ceramic Heat Exchangers,” Am. Ceram. Soc. Bull., 67 388-91 (1988)
- Y. Takeda, “Development of High-Thermal-Conductive SiC Ceramics,” Am. Ceram. Soc. Bull., 67 1961-63 (1988)
-
B. Riccardi, P. Fenici, A.F. Rebelo, L. Giancarli, G.L. Marois, and E. Philippe, “Status of the European R&D Activities on
$SiC_f/SiC$ Composites for Fusion Reactors,” Fusion Eng. Des., 51-52 11-22 (2000) https://doi.org/10.1016/S0920-3796(00)00311-2 -
B. Riccardi, L. Giancarli, A. Hasegawa, Y. Katoh, A. Kohyama, R.H. Jones, and L.L. Snead, “Issues and Advances in
$SiC_f/SiC$ Composites Development for Fusion Reactors,” J. Nucl. Mater., 329-333 56-65 (2004) https://doi.org/10.1016/j.jnucmat.2004.04.002 - R.J. Kerans and T.A. Parthasarathy, “Crack Deflection in Ceramic Composites and Fiber Coating Design Criteria,” Compos. Part A, 30 521-24 (1999) https://doi.org/10.1016/S1359-835X(98)00144-4
- R. Yamada, T. Taguvhi, and N. Igawa, “Mechanical and Thermal Properties of 2D and 3D SiC/SiC Composites,” J. Nucl. Mater., 283-287 574-78 (2000) https://doi.org/10.1016/S0022-3115(00)00144-6
-
A. Ortona, A. Donato, G. Filacchioni, U.D. Angelis, A.L. Barbera, C.A. Nannetti, B. Riccardi, and J. Yeatman, “
$SiC-SiC_f$ CMC Manufacturing by Hybrid CVI-PIP Techniques: Process Optimasation,” Fusion Eng. Des., 51-52 159-63 (2000) https://doi.org/10.1016/S0920-3796(00)00310-0 - Y. Katoh, S.M. Dong, and A. Kohyama, “Thermo-mechanical Properties and Microstructure of Silicon Carbide Composites Fabricated by Nano-infiltrated Transient Eutectoid Process,” Fusion Eng. Des., 61-62 723-31 (2002) https://doi.org/10.1016/S0920-3796(02)00180-1
- S. Dong, Y. Katoh, and A. Kohyama, “Preparation of SiC/ SiC Composites by Hot Pressing, Using Tyranno-SA Fibers as Reinforcement,” J. Am. Ceram. Soc., 86 [1] 26-32 (2003) https://doi.org/10.1111/j.1151-2916.2003.tb03272.x
- K. Shimoda, J.S. Park, T. Hinoki, and A. Kohyama, “Influence of Pyrolytic Carbon Interface Thickness on Microstructure and Mechanical Properties of SiC/SiC Composites by NITE Process,” Ceram. Sci. Technol., 68 98-105 (2008) https://doi.org/10.1016/j.compscitech.2007.05.037
-
T. Ishikawa, Y. Kohtoku, K. Kumagawa, T. Yamamura, and T. Nagasawa, “High-Strength Alkai-Resistant Sintered SiC Fibre Stable to
$2,200^{\circ}C$ ,” Nature, 391 773-75 (1998) https://doi.org/10.1038/35820 - L. Besra, and M. Liu, “A Review on Fundamentals and Applications of Electrophoretic Deposition (EPD),” Prog. Mater. Sci., 52 1-61 (2007) https://doi.org/10.1016/j.pmatsci.2006.07.001
- S. Novak, K. Rade, K. König, and A.R. Boccaccini, “Electrophoretic Deposition in the Production of SiC/SiC Composites for Fusion Reactor Applications,” J. Eur. Ceram. Soc., 28 2801-07 (2008) https://doi.org/10.1016/j.jeurceramsoc.2008.04.004
-
K. Yoshida, K. Matsukawa, M. Imai, and T. Yano, “Formation of Carbon Coating on SiC Fiber for Two-Dimensional
$SiC_f/SiC$ Composites by Electrophoretic Deposition,” Mat. Sci. Eng. B, 161 188-92 (2009) https://doi.org/10.1016/j.mseb.2008.11.032 - K. Yoshida, K. Matsukawa, and T. Yano, “Microstructure and Mechanical Properties of Silicon Carbide Fiber-Reinforced Silicon Carbide Composite Fabricated by Electrophoretic Deposition and Hot-Pressing,” J. Nucl. Mater., 386-388 643-46 (2009) https://doi.org/10.1016/j.jnucmat.2008.12.314
- J.H. Lee, P. Yonathan, D.H. Yoon, W.J. Kim, and J.Y. Park, “Dispersion Stability and Its Effect on Tape Casting of Solvent-Based SiC Slurries,” J. Ceram. Proc. Res., 10 301-07 (2009)
Cited by
- /SiC Composites vol.48, pp.5, 2011, https://doi.org/10.4191/kcers.2011.48.5.335
- Formation of a Carbon Interphase Layer on SiC Fibers Using Electrophoretic Deposition and Infiltration Methods vol.52, pp.4, 2015, https://doi.org/10.4191/kcers.2015.52.4.284
- Electrophoretic (Infiltration) Deposition of Thick Conductive Fiber Preforms vol.162, pp.11, 2015, https://doi.org/10.1149/2.0141511jes
- Stability and electrophoretic deposition of nano-SiC assisted by PEI pp.1532-2351, 2019, https://doi.org/10.1080/01932691.2018.1535978