평행 벽 제트-노즐 형상에서 난류모델별 막냉각 예측 능력

Capability of Turbulence Modeling Schemes on Estimating the Film Cooling at Parallel Wall Jet-Nozzle Configuration

  • 이준 (한국원자력연구원) ;
  • 김유 (충남대학교 기계공학과)
  • 발행 : 2009.02.28

초록

본 연구에서는 평행 벽 제트-노즐 형상의 막냉각 수치해석에 적합한 난류모델을 선정하고자 하였다. 현재 실험을 하기 위한 전 단계이므로, 먼저 유사한 참고 형상에 대해 Standard $k-{\epsilon}$ 모델과 RNG $k-{\epsilon}$ 모델, SST $k-{\omega}$ 모델, 그리고 RSM 모델 등 다양한 난류모델을 적용하였고, Near-wall 처리 방법으로서 SST $k-{\omega}$ 모델을 제외하고는 Standard wall functions와 Enhanced wall functions 등 2종류를 각각의 모델에서 사용하였으며, 실험값과 비교하여 보다 적합한 난류모델을 선정하고자 하였다. 나아가 2차원 축대칭으로 평행 벽 제트-노즐 단일 슬롯 형상에 대해 기선정한 난류모델을 적용하여 막냉각 특성을 살펴보았다. 유사 참고 형상에 대한 해석 결과 Standard $k-{\epsilon}$ 모델 및 RSM 모델이 거의 비슷한 성능을 보여주었으나 수렴성이 우수한 Standard $k-{\epsilon}$ 모델이 선정되었다. 또한 Standard wall functions를 사용하는 것보다 Enhanced wall functions를 사용하는 것이 더 좋은 결과를 보여주었다. 나아가 평행 벽 제트-노즐 단일 슬롯 형상에 적용한 결과 물리적으로 타당한 막냉각 특성을 보여주었다. 선정된 모델 및 해석방법론을 이용하여 평행 벽 제트-노즐 다단 슬롯 형상에 대한 막냉각 해석을 수행할 예정이며, 관련 결과는 추후 실험 예비해석 방법론으로 활용할 예정이다.

Numerical simulation has been performed in this study to investigate the capabilities of turbulence modeling schemes on estimating the film cooling at a referenced parallel wall jet-nozzle configuration. Also a additional simulation has been performed for film cooling under 2-dimensional axis symmetry conditions at a parallel wall jet-nozzle configuration. It was concluded that the best turbulence model is the standard $k-{\epsilon}$ model with enhanced wall functions. Also a additional simulation showed the film cooling characteristics that are resonable physically.

키워드

참고문헌

  1. 이근식, 손창호, 김태묵, '계단형 슬롯추구의 높낮이 변화에 따른 2차원 막냉각 특성,' 대한기계학회논문집 B권, 제29권, 제1호, 2005, pp.46-54 https://doi.org/10.3795/KSME-B.2005.29.1.046
  2. 이윤석, 이동호, 조형희, '사각홀에서 막냉각 효율 및 열전달계수의 측정,' 설비공학논문집, 제14권, 제5호, 2002, pp.365-376
  3. 함진기, 조형희, '냉각유로방식 변화에 따른 슬롯 막냉각에서의 유동 및 열전달 특성,' 대한기계학회논문집 B권, 제24권, 제6호, 2000, pp.870-879
  4. 함진기, 김병기, 조형희, '가스터빈 연소실 슬롯 막냉각의 분사방법 변화에 따른 열전달 특성 고찰,' 대한기계학회논문집 B권, 제23권, 제4호, 1999, pp.511-519
  5. S. B. Murray, 'A Calculation Method for Convective Heat and Mass Transfer in Multiply-Slotted Film-Cooled Applications,' Defence Research Establishment Suffield, Ralston, Alberta, Canada, January 1980
  6. S. B. Murray, 'Design of a Film-Cooled Entraining Diffuser,' Defence Research Establishment Suffield, Ralston, Alberta, Canada, April 1980
  7. C. A. Cruz, A. W. Marshall, and A. Trouve, 'Large-Eddy Simulation of Film Cooling Through a 2D Slot,' 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, AIAA-2006-4710, July 2006
  8. C. A. Cruz, A. Veeraragavan, K. Dellimore, C. Cadou, and A. W. Marshall, 'Near-Wall Measurements of Gas Temperature in Conventional-Scale and Micro-Scale Rockets,' 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, AIAA-2005-4125, July 2005
  9. F. Raffan, C. A. Cruz, and K. Dellimore, C. Cadou, and A. W Marshall, 'Near Wall Measurements Along a Film Cooled Wall,' 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, AIAA-2006-4709, July 2006
  10. C. A. Cruz and A. W. Marshall, 'Surface and Gas Phase Measurements Along a Film Cooled Wall,' Journal of Thermophysics and Heat Transfer, 21 (1), 2007, pp.181-189 https://doi.org/10.2514/1.25041
  11. 'FLUENT 6.1 User's Guide,' Chapter 10(Modeling Turbulence), Section 10.1-10.6, Fluent Inc., 2003
  12. D. Choudhury, 'Introduction to the Renormalization Group Method and Turbulence Modeling,' Fluent Inc. Technical Memorandum TM-107, 1993
  13. F. R. Menter, 'Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications,' AIAA Journal, 32(8):1598-1605, August 1994 https://doi.org/10.2514/3.12149
  14. S. V. Patankar, 'Numerical Heat Transfer and Fluid Flow,' Hemisphere Pub. Corp., 1980
  15. 'FLUENT 6.1 User's Guide,' Chapter 10 (Modeling Turbulence), Section 10.8-10.11, Fluent Inc., 2003
  16. B. Kader, 'Temperature and Concentration Profiles in Fully Turbulent Boundary Layers,' Int. J. Heat Mass Transfer, 24(9):1541-1544, 1993