DOI QR코드

DOI QR Code

Thermoluminescent Properties by the Cooling Temperature and Grain Size in the LiYSiO4 : La Phosphors

LiYSiO4: La 열형광체의 온도에 따른 열발광 특성

  • Kim, Young-Kook (Department of Electrical Engineering, Kyungnam University)
  • 김영국 (경남대학교 전기공학과)
  • Published : 2009.09.27

Abstract

The thermoluminescent phosphors of LiYSi$O_4$ containing rare earth metal(La) dopants of 1 wt.%5 wt.% were prepared, and their TL characteristics have been investigated as a function of parameters such as the doping level and the heating rate. The grain size and cooling temperature of the highly sensitive LiYSi$O_4$: La phosphors have been investigated. The glow curve of LiYSi$O_4$: La has two peaks ($P_1,\;P_2$), and the peak height ratio of the two peaks is called $P_2/P_1$; here, the main peak is $P_2$. Experimental results indicate that the peak height ratios of the glow curve for LiYSi$O_4$: La are clearly correlated with the grain size and cooling temperature. The maximum $P_2/P_1$ ratio 3.25, the maximum sensitivity was observed for a grain size between 100-150 ${\mu}m$. The intensity of the TL peak of the phosphors was linearly proportion to the dose of X-rays.

Keywords

References

  1. K. Mahesh, P. S. Weng and C. Furetta, Thermoluminescence in Solids and Its Applications (Nucl. Tech. Pub., Ashford, USA, 1989), p.200
  2. A. S. Pradhan, Rad. Protec. Dosim., 1(3), 153 (1981)
  3. S. H. Kim, W. Kim, H. D. Kang, S. H. Doh, H. J. Seo, Y. K. Kim and D. S. Kim, Kor. J. Mater. Res., 13(6), 343 (2003) https://doi.org/10.3740/MRSK.2003.13.6.343
  4. A. S. Pradhan, Red. Protec Dosim., 13, 153(1981)
  5. N. Tsoulfanidis, Measurement and Detection of Radiation (Hemisphere Publishing Corporation, UK, 1976), p.10
  6. Y. Okamoto, S. Kawaguchi, S. Kino, S Miono, T. Kitajima, A. Misaki and T. Sato, Nucl. Instrum. Meth., A243, 219 (1986)
  7. G. Gai, K. Geng, and Q. Wang, Rad. Prot. Dosim., 60, 259 (1995)
  8. S. H. Doh, W. G. Lee, M. J. Yoo, H. D. Kang and D. S. Kim, J. Kor. Sen. Soc., 7(5), 14 (1998)
  9. S. H. Kim, C. J. Kim, W. Kim, H. D. Kang, D. S. Kim, Y. K. Kim, H. J. Seo and S. H. Doh, Sae Mulli, 45(3), 184 (2002)
  10. S. H. Doh, H. J. Seo, G. J. Kang, Y. K. Kim and H. D. Kang, Sae Mulli, 11(5), 47 (2002)
  11. S. H. Doh, H. J. Seo, Y. K. Kim W. Kim and H. D. Kang, J. Kor. Sen. Soc., 11(6), 1 (2002)
  12. S. Lorrain, J. P. David, R. Visocekas and G. Marinello, Rad. Protec. Dosim., 17, 385 (1986) https://doi.org/10.1093/oxfordjournals.rpd.a079844
  13. Y. M. Nam, J. L. Kim, S. Y. Chang and S. H. Doh, Sae Mulli, 40(3), 189 (2000)
  14. E. S. Lee, Y. K. Kim and Sae Mulli, 54(3), 175 (2007)
  15. M. J. Yoo, S. H. Doh and Sae Mulli, 42(2), 76 (2001)
  16. C. Kittel, Introduction to Solid Physics (McGraw Hill, New York, USA, 1976), p.250
  17. A. S. Pradhan and R. C. Bhatt, Nucl. Instrum. Methods, 161, 243 (1979) https://doi.org/10.1016/0029-554X(79)90390-2
  18. I. Kasa, Radiat. Prot. Dosim., 33, 299 (1990)