참고문헌
- H. J. Cho, H. J. Kim, C. K. Cheon, W. S. Chang, K. S. Bang, 2006, Evaluation of Friction Spot Joining Weldability of Al Alloys for Automotive, Trans. KWS, Vol. 24, No. 1, pp. 50-56
- D. H. Lim, B. W. Lee, H. H. Rhyu, H. K. Kim, 2003, An Experimental Study on the Strength Evaluation of Al-5052 Tensile-Shear Specimens Using a Mechanical Press Joining Method, Trans. KSMTE, Vol. 12, No. 1, pp. 58-64
- Y. B. Lee, Y. K. Park, C. S. Chung, H. K. Kim, 2000, An Experimental Study on the Strength Evaluation of Mechanical Press Joint, Trans. KSME, Vol. 24, No. 2, pp. 438-447
- J. P. Varis, 2006, Economics of Clinched Joint Compared to Riveted Joint and Example of Applying Calculations to a Volume Product, J. Mater. Process. Technol., Vol. 172, pp. 130-138 https://doi.org/10.1016/j.jmatprotec.2005.09.009
-
C. P. A. Mota, N. G.costa, 2005, A Comparative Study Between the Sheet Joining Processes by Point TOX
${\circledR}$ and Spot Welding, Proceedings of the Annual Congress of the Brazilian Society for Metallurgy and Materials, ABM, Belo Horizonte, pp. 2733-2741(in Portuguese) - J. P. Varis, 2003, The suitability of clinching as a joining method for high-strength structural steel, J. Mater. Process. Technol., Vol. 132, No. 1-3, pp. 242-249 https://doi.org/10.1016/S0924-0136(02)00933-0
- Y. B. Lee, T. Y. Kim, C. S. Chung, J. H. Choi, 2000, A Study on the Optimum Joining Condition in a Mechanical Press Joint, Trans. KSME, Vol. 24, No.3, pp. 752-760
- A. A. de Paula, M. T. P. Aguilar, A. E. M. Pertence, P. R. Cetlin, 2007, Finite Element Simulations of the Clinch Joining of Metallic Sheets, J. Mater. Process. Technol., Vol. 182, No. 1-3, pp. 352-357 https://doi.org/10.1016/j.jmatprotec.2006.08.014
- M. Oudjene, L. Ben-Ayed, 2008, On the Parametrical Study of Clinch Joining of Metallic Sheets Using the Taguchi Method, Engng. Struct., Vol. 30, No. 6, pp. 1782-1788 https://doi.org/10.1016/j.engstruct.2007.10.017
- SFTC, 2004, DEFORM-2D Ver. 8.0 Users Manual (Scientific Forming Technologies Corporation Inc., U.S.A.)
- V. R. Jayasekara, J. H. Noh, B. B. Hwang, K. C. Ham, D. H. Jang, 2007, A Study on the Forming Characteristics of Clinching Joint Process, Trans. KSTP, Vol. 16, No. 8, pp. 603-613 https://doi.org/10.5228/KSPP.2007.16.8.603
- J. P. Varis, J. Lepisto, 2003, A Simple Testing-based Procedure and Simulation of the Clinching Process Using Finite Element Analysis for Establishing Clinching Parameters, Thin-Walled Structures, Vol. 41, pp. 691-709 https://doi.org/10.1016/S0263-8231(03)00026-0
피인용 문헌
- A Study on Welding Strength of Extru-Riveting Process of Aluminum Plates vol.19, pp.8, 2010, https://doi.org/10.5228/KSTP.2010.19.8.460
- Prediction and Verification of Lateral Joining Strength for Tapered-Hole Clinching using the Taguchi Method vol.25, pp.1, 2016, https://doi.org/10.5228/KSTP.25.1.36
- Numerical Study for the Improvement of Tapered-hole Clinching Joint Strength of Fiber Metal Laminates and Aluminum 5052 using the Taguchi Method vol.24, pp.1, 2015, https://doi.org/10.5228/KSTP.2015.24.1.37
- Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys – A review vol.101, 2017, https://doi.org/10.1016/j.compositesa.2017.06.007
- Design of mechanical clinching tools for joining of aluminium alloy sheets vol.31, pp.4, 2010, https://doi.org/10.1016/j.matdes.2009.10.064
- The analysis of lock forming mechanism in the clinching joint vol.32, pp.10, 2011, https://doi.org/10.1016/j.matdes.2011.05.045