References
- Y. Nobuki, I. Takashi, Y. Yoshinori, K. Akira, 2005, Influence of rolling condition on deformation of surface micro-defect in plate rolling, ISIJ, Vol. 91, No. 12, pp. 15-21
- I. Takashi, Y. Nobuki, Y. Yoshinori, T. Yuhi, 2003, Deformation analysis of surface defects on plate rolling, ISIJ, Vol.89, No. 11, pp. 50-57
- Y. Nobuki, Y. Yoshinori, I. Takashi, 2006, Deformation analysis of longitudinal surface micro-defects in flat rolling, ISIJ, Vol. 92, No. 11, pp. 19-24
- Y. Hai-liang, L. Xiang-hua, L. Chang-sheng, Y. Kusaba, 2006, Behavior of transversal crack on slab corner during V-H rolling process, J. Iron Steel Res. Inter., Vol. 13, No. 6, pp. 31-37 https://doi.org/10.1016/S1006-706X(06)60106-4
- H. L. Yu, X. H. Liu, Z. Y. Jiang, 2008, FE analysis of behavior of internal-longitudinal crack in a slab during vertical-horizontal rolling, Proc. the 8th asia-pacific Conf. Mater. Process., June 15-20, pp. 799-804
- H. L. Yu, X. H. Liu, G. D. Wang, 2008, Analysis of crack tip stress of transversal crack on slab corner during vertical-horizontal rolling process by FEM, J. Iron Steel Res. Inter., Vol. 15, No. 3, pp. 19-26 https://doi.org/10.1016/S1006-706X(08)60119-3
- H. L. Yu, X. H. Liu, H. Y. Bi, L. Q. Chen, 2009, Deformation behavior of inclusions in stainless steel strips during multi-pass cold rolling, J. Mater. Process. Technol. Vol. 209, pp. 455-461 https://doi.org/10.1016/j.jmatprotec.2008.02.016
- E. Ervasti, U. Stahlberg, 1999, Behavior of longitudinal surface cracks in the hot rolling of steel slabs, J. Mater. Process. Technol., Vol. 94, pp. 24-28 https://doi.org/10.1016/S0924-0136(99)00090-4
- E. Ervasti, U. Stahlberg, 1999, Transversal cracks and their behavior in the hot rolling of steel slabs, J. Mater. Process. Technol., Vol. 101, pp. 312-321 https://doi.org/10.1016/S0924-0136(99)00481-1
- M. G. Cockroft, D. J. Latham, 1968, Ductility and the workability of metals, J. Inst. Met., 96, pp. 33-39
- B. S. Shin, D. S. Choi, E. S, D. J. Lee, J. H. Lee, 2000, The Manufacturing Technique of Metal Rapid Products by the Ming Process, J. Kor. Soc. Precis. Eng., pp. 759-762