마이크로전자및패키징학회지 (Journal of the Microelectronics and Packaging Society)

  • 제16권2호
  • /
  • Pages.11-19
  • /
  • 2009
  • /
  • 1226-9360(pISSN)
  • /
  • 2287-7525(eISSN)
한국마이크로전자및패키징학회 (The Korean Microelectronics and Packaging Society)
권호 표지

Wire Bonding PBGA 패키지의 솔더볼 그리드 패턴에 따른 열-기계적 거동

Thermo-mechanical Behavior of Wire Bonding PBGA Packages with Different Solder Ball Grid Patterns

  • Joo, Jin-Won (Department of Mechanical Engineering, Chungbuk National University)
  • 발행 : 2009.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

모아레 간섭계를 이용하여 와이어 본딩 플라스틱 볼 그리드 (WB-PBGA) 패키지의 열-기계적인 거동 특성을 연구하였다. 실시간 모아레 간섭계를 이용하여 각 온도단계 에서 변위분포를 나타내는 간섭무늬를 각각 얻고, 그로부터 굽힘변형 거동 및 솔더볼의 변형률에 대한 해석을 비교하여 수행하였다. 본 실험에서는 full grid와 perimeter with central connections 및 perimeter의 배열 형태를 갖는 세 가지 패키지를 사용하였으며, 이 배열 형태를 비교하여 굽힘변형 및 솔더볼의 평균변형률을 자세하게 해석하였다. 솔더볼의 유효변형률은 WB-PBGA-FG의 경우 칩 가장자리 바로 바깥쪽 솔더볼에서, WB-PBGA-P/C의 경우 가운데 연결 솔더볼의 가장 바깥 솔더볼에서, WB-PBGA-P의 경우는 칩과 가장 기까운 안쪽 솔더볼에서 최대값을 가지는 것으로 나타났다.

Thermo-mechanical behaviors of wire-bond plastic ball grid array (WB-PBGA) package assemblies are characterized by high-sensitivity moire interferometry. Using the real-time moire setup, fringe patterns are recorded and analyzed for several temperatures. Experiments are conducted for three types of WB-PBGA package that have full grid pattern and perimeter pattern with/without central connections. Bending deformations of the assemblies and average strains of the solder balls are investigated, with an emphasis on the effect of solder interconnection grid patterns, Thermal strain distributions and the location of the critical solder ball in package assemblies are quite different with the form of solder ball grid pattern. For the WB-PBGA-PC, The largest of effective strain occurred in the inner solder ball of perimeter closest to the chip solder balls. The critical solder ball is located at the edge of the chip for the WB-PBGA-FG, at the most outer solder ball of central connections for the WB-PBGA-P/C, and at the inner solder ball closest to the chip for the WB-PBGA-P.

키워드

참고문헌

  1. R. Darveaux and A. Mawer, "Thermal and Power Cycle Limit of Plastic ball grid array (PBGA) assemblies," Proc. Surface Mount Int. Conf., 315(1995).
  2. A. F. Skipor, S. V. Harren and J. Botsis,, "On the Constitutive Response of 63/37 SnlPb Eutectic Solder," ASME. J. Eng. Mater. Technol., 118, 1(1996). https://doi.org/10.1115/1.2805929
  3. J. S. Corbin, "Finite Element Analysis for Solder Ball Connect (SBC) Structural design Optimization," IBM J. Research Development, 37, 585(1993). https://doi.org/10.1147/rd.375.0585
  4. T. Lee and L. Jung, "Finite Element Analysis for Solder Ball Failures in Chip Scale Packages," Microelectronics and Reliability, 38(2), 1941(1998). https://doi.org/10.1016/S0026-2714(98)00163-2
  5. S. C. Chen, Y. C. Lin and C. H. Cheng, "The Numerical Analysis of Strain Behavior at the Solder Joint and Interface in a Flip Chip Package," J. Materials Processing Technology, 171, 125(2006). https://doi.org/10.1016/j.jmatprotec.2005.06.061
  6. J. W. Joo and N. J. Choi, "The Effect of Finite Element Models in Thermal Analysis of Electronic Packages," Trans. of the KSME(A), 33(4), 380(2009).
  7. D. Post, B. Han and P. Ifju, High Sensitivity Moire: Experimental Analysis for Mechanics and Materials, Springer-Verlag, New York(1994).
  8. D. Post, J. D. Wood, B. Han, V. J. Parks and Jr., F. P. Gerstle, "Thermal Stresses in a Bimaterial Joint: An Experimental Analysis," J. Applied Mechanics, Trans. ASME, 61 (1), 192(1994). https://doi.org/10.1115/1.2901397
  9. B. Han, Z. Wu and S. Cho, "Measurement of Thermal Expansion Coefficient of Flexible Substrate by Moire Interferometry, Experimental Techniques," 25(3), 22(2001). https://doi.org/10.1111/j.1747-1567.2001.tb00020.x
  10. S. J. Ham and S. B. Lee, "Measurement of Creep and Relaxation Behaviors of Wafer-level CSP Assembly Using Moire Interferometry, J. Electronic Packaging, Trans. of the ASME, 125(June), 282(2003). https://doi.org/10.1115/1.1571571
  11. B. Han, S.-M. Cho, J. Joo, "Temperature Dependent Deformation Analysis of Ceramic Ball Grid Array Package Assembly Under Accelerated Thermal Cycling Condition, J. Electronic Packaging, Trans. of the ASME, 126(March), 41 (2004). https://doi.org/10.1115/1.1646426
  12. J. W. Joo and D. H. Kim, "Thermo-mechanical Deformation Analysis of Flip Chip PBGA Packages Subjected to Temperature Change," J. Microelect. & Packag. Soc. 13(4), 17(2004).
  13. J. Joo, S. Cho and B. Han, "Characterization of Flexural and Thermo-mechanical Behavior of Plastic Ball Grid Array Package Assembly Using Moire Interferometry," Micrelectronics Reliability, 45(4), 637(2005). https://doi.org/10.1016/j.microrel.2004.10.006