초록
본 연구에서는 케이블의 굽힘 정도를 광섬유의 마이크로벤드 특성을 이용하여 측정할 수 있는 방법과 이를 적용한 실험 결과를 제시한다. 케이블의 양방향 굽힘 측정을 위해 굽힘시 동일한 강도와 크기의 마이크로벤드 현상을 광섬유에 일으킬 수 있는 새로운 형태의 구조를 설계하였고, 이를 반영한 측정 장치로 케이블의 곡률이 $0.1\;cm^{-1}$부터 $0.4\;cm^{-1}$인 범위 내에서 증가함에 따라 광신호의 크기가 감쇠함을 실험을 통해 확인하였다. 또한 제안된 센서의 분산측정 적용을 위해, OTDR을 이용하여 케이블의 곡률별로 구분된 굽힘 지점들에서 반사된 광 펄스 신호들의 크기를 측정하여 기준 측정값과의 비교를 통해 분산 센서로의 적용 가능성을 확인하였다.
In this paper the measurement method of cable's curvature using fiber optic microbend effect and its experimental results are presented. The novel structure of fiber optic microbender, which can generate microbend effect on the optical fiber in the case of both directional bending of cable, was designed. Through the experiment using suggested sensing system, the increasing trend of attenuated optical power was found out under the range from $0.1\;cm^{-1}$ to $0.4\;cm^{-1}$ of curvature. To the multi and distributed measurement, using OTDR, the scattered optical pulses at the bending points are measured and compared with the result which was measured by optical power meter.