References
- S. Imamura, T. Murakami, K. Ikeda, Z. Chen, 2000, Fabrication of Three-Layer Pipes Composed of ZrO2, and Stainless Steel by Multi-Billet Extrusion method, J. Japan. Soc. Tech. Plast., Vol. 41, pp. 131-165
- Y. M. Hwang, T. F. Hwang, 2002, An Investigation into the Plastic Deformation Behavior within a Conical Die During Composite Rod Extrusion, J. Materials Processing Tech. Vol. 121, No. 2-3, pp. 226-233 https://doi.org/10.1016/S0924-0136(01)01254-7
- A. K. Tayal, R. Natarajan, 1981, A Finite Element Analysis of Axisymmetric Extrusion of Composite Rods, Int. J. Mach. Tool Des. Res. Vol. 21, pp. 227-235 https://doi.org/10.1016/0020-7357(81)90020-2
- B. Avitzur, R. Wu, S, Talbert, Y. T. Chou, 1982, Criterion for the Prevention of Core Fracture during Extrusion of Bimetal Rods, J. Eng, Ind., Vol. 104, pp. 293-304 https://doi.org/10.1115/1.3185833
- Yeo-Kwon Yun, Hee-Nam Kim and Yong-Su Kim, 2000, The Effect of Process Parameter in Direct Extrusion of Copper Clad Aluminum Composite Materials, Journal of the KIIS, Vol. 15, No. 4
- Hee-Nam Kim, Won-Young Kang, 2001, Journal of Research Institute of Industrial Technology, Vol. 20
- Hee-Nam Kim, Sung-Hoon Park, 2001, Interface Bonding of Copper Clad Aluminum Rods by the Direct Extrusion, Journal of Research Institute of Industrial Technology, Vol. 20
- Jeong-In Kim, Chung-Gil Kang and Hyok-Chon Kwon, 1999, Extrusion Process Analysis of Al/Cu Clad Composite Materials by Finite Element Method, J. Kor. Soci. Comp. Mater, Vol. 12, No. 5
- Jong-Ho Kim, Byung-Kwon Suh, Hyuk-Chon Kwon and Woo Young Yoon, 2000, Extrusion Conditions and Bonding Characterization of Al/Cu Clad Composite Material Fabricated by Indirect Extrusion, J. Kor. Inst. Met. & Mater, Vol. 38, No. 3, pp. 474-480
- Jae-Seol Lee, Hyuk-Chon Kwon and Mok-Soon Kim, 2000, A Study on the Fabrication and Properties of Ti-Cu Clad Extrudates, J. Kor. Inst. Met & Mater, Vol. 38, No. 2, pp. 388-396
- J. M. Seo, J. H. Noh, K. H. Min, B. B. Hwang, K. C. Ham, D. H. Jang, 2007, Inhomogeneous Deformation Between Construction Materials in Cu/Al and Fe/Al Co-extrusion Processes, Trans. Materials Processing, Vol. 16, No.7, pp. 530-537 https://doi.org/10.5228/KSPP.2007.16.7.530
- D. H. Jang, 2009, Influence of Process Parameters on the Forming Compatibility in Composite Extrusion Rods, Trans. Materials Processing, Vol. 18, No.1, pp. 80-86 https://doi.org/10.5228/KSPP.2009.18.1.080
- P. Kazanowski, M. E. Epler, W. Z. Misolek, 2004, Bi-metal rod Extrusion Process and Product Optimization, Mater. Sci. & Eng. A. Vol. 369, pp.170-180 https://doi.org/10.1016/j.msea.2003.11.002
- J. S. Kim, Y-S Lee, S-H Yoon, 2005, Development of a Process Map for Bundle Extrusion of Cu-Ti Bimetal Wires, Proc. of Korean Soc. for Tech. Plasticity, pp. 393-397
- ABAQUS User’s Manual